Three-Dimensional Congenital Heart Models Created With Free Software and a Desktop Printer: Assessment of Accuracy,Technical Aspects,and Clinical Use

Abstract

Background:

Three-dimensional printing is increasingly recognized as a valuable tool for congenital heart disease (CHD) procedural planning and education. Cost and complexity currently limit the more widespread adoption of this technology. We sought to demonstrate the accuracy of 3D printed CHD models created from contrast-enhanced magnetic resonance imaging (MRI) and computed tomography (CT) scans using free software and an inexpensive desktop fused filament fabrication (FFF) printer.

Methods:

Solid segmentations of the intracardiac blood pool were created with the program ITK-SNAP. Using the computer program Meshmixer, the segmentation model was hollowed to create a 0.8 mm shell with the inner surface representing endocardium. Three-dimensional models were created on an FFF printer. Four arteries and a ventricular septal defect (VSD) were 3D printed and measured for accuracy. Five models were used to assess candidacy for biventricular surgical repair and one to guide an interventional catheterization.

Results:

All six patients underwent intervention planned with the 3D models. The computer model shell walls all achieved specifications within 0.05 mm of the designated 0.8 mm thickness and the original solid blood pool segmentation fit within the hollowed 3D model. The 3D printed arteries and VSD all measured accurately to within 0.5 mm of their source computer model.

Conclusion:

Accurate 3D printed models of complex, pediatric CHD may be created from volumetric MRI and CT studies using free online software and printed on an inexpensive desktop printer.

Keywords

congenital heart disease 3D printing double outlet right ventricle surgical planning

Get full access to this article

View all access options for this article.

References

Anwar

Singh

Miller

, et al. 3D printing is a transformative technology in congenital heart disease. JACC Basic Transl Sci. 2018;3(2):294–312.

Hussein

Honjo

Haller

, et al. Quantitative assessment of technical performance during hands-on surgical training of the arterial switch operation using 3-dimensional printed heart models. J Thorac Cardiovasc Surg. 2020;160(1):229–240.e1.

Meyer-Szary

Woźniak-Mielczarek

Sabiniewicz

. Feasibility of in-house rapid prototyping of cardiovascular three-dimensional models for planning and training non-standard interventional procedures. Cardiol J. 2019;26(6):790–792.

Lau

IWW

Sun

. Dimensional accuracy and clinical value of 3D printed models in congenital heart disease: a systematic review and meta-analysis. J Clin Med. 2019;8(9):1483

Chung

Radacsi

Robert

, et al. On the optimization of low-cost FDM 3D printers for accurate replication of patient-specific abdominal aortic aneurysm geometry. 3D Print Med. 2018;4(1):2.

Lau

Wong

Yeong

, et al. Quantitative and qualitative comparison of low- and high-cost 3D-printed heart models. Quant Imaging Med Surg. 2019;9(1):107–114.

Han

Zhou

Han

Gao

Nguyen

Finn

Self-gated 4D multiphase, steady-state imaging with contrast enhancement (MUSIC) using rotating cartesian K-space (ROCK): validation in children with congenital heart disease. Magn Reson Med. 2017;78(2):472–483.

Kim-Lien

Fei

Ziqu

, et al. 4D MUSIC CMR: value-based imaging of neonates and infants with congenital heart disease. J Cardiovasc Magn Reson. 2017;19(1):40. doi:10.1186/s12968-017-0352-8

Yushkevich

Piven

Hazlett

. User-guided 3D active contour segmentation of anatomical structures: significantly improved efficiency and reliability. Neuroimage. 2006;31(3):1116–1128. Epub 2006 Mar 20.

10.

Yoo

van Arsdell

. 3D printing in surgical management of double outlet right ventricle. Front Pediatr. 2018;5:289. doi:10.3389/fped.2017.00289. eCollection 2017. Review.

Supplementary Material

Please find the following supplemental material available below.

For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.

For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.

0.00 MB

0.06 MB