GuncuMBAktasGGuncuGN, et al. Clinical, Technical, and Radiologic Outcomes of 182 Implant-Supported Zirconia Single Crowns Using Titanium-Base Abutments: A Retrospective Study. Int J Prosthodont. 2022;35(4):553-559.
2.
TurkyilmazIUnsalGS. Full-mouth rehabilitation of an elderly patient with Sjogren’s syndrome by using implant-supported fixed dental prostheses including CAD/CAM frameworks. J Dent Sci. 2019;14(4):428-429.
3.
UnsalGSTurkyilmazI. Improved reconstruction of an implant-retained auricular prosthesis using CAD/CAM technology. J Dent Sci. 2019;14(3):328-329.
4.
de CastroHSKehrwaldRMatheusRA, et al. Influence of low-dose protocols of CBCT on dental implant planning. Int J Oral Maxillofac Implants. 2021;36(2):307-312.
5.
OzanOOrhanKTurkyilmazI. Correlation between bone density and angular deviation of implants placed using CT-generated surgical guides. J Craniofac Surg. 2011;22(5):1755-1761.
6.
MeneghettiPCSabriHDastouriE, et al. Digital planning for two-implant-supported overdenture and bone reduction guide using cone-beam computed tomography: Simple features for predictable outcomes. J Prosthodont. 2023;32(4):361-370.
7.
CassettaMDi GiorgioRBarbatoE. Are intraoral radiographs accurate in determining the peri-implant marginal bone level?Int J Oral Maxillofac Implants. 2018;33(4):847-852.
8.
NetoJDPMeloGMarinC, et al. Diagnostic performance of periapical and panoramic radiography and cone beam computed tomography for detection of circumferential gaps simulating osseointegration failure around dental implants: a systematic review. Oral Surg Oral Med Oral Pathol Oral Radiol. 2021;132(6):e208-e222.
9.
AntonyDPThomasTNivedhithaMS. Two-dimensional periapical, panoramic radiography versus three-dimensional cone-beam computed tomography in the detection of periapical lesion after endodontic treatment: a systematic review. Cureus. 2020;12(4):e7736.
10.
MasthoffMGerwingMMasthoffM, et al. Dental Imaging - A basic guide for the radiologist. Rofo. 2019;191(3):192-198.
11.
JacobsRSalmonBCodariM, et al. Cone beam computed tomography in implant dentistry: recommendations for clinical use. BMC Oral Health. 2018;18(1):88.
12.
TurkyilmazIGavrasJN. Fabrication of immediately loaded implant-retained maxillary overdenture with flapless surgery using a CAD/CAM surgical guide: A technical report. Prim Dent J. 2022;11(4):61-65.
13.
TurkyilmazI. Keys to achieving successful restoratively-driven implant placement with CAD/CAM surgical guide: A technical note. J Stomatol Oral Maxillofac Surg. 2019;120(5):462-466.
