This study adopted the LS-DYNA mapping algorithm to implement a numerical simulation of a near-surface burst and steel plate non-contact explosion experiments. The rationality and reliability of the mapping technique used in the numerical simulation were validated by a comparison between the experiments and the numerical simulation. The findings showed that the numerical simulation result was consistent with the experimental blast attenuation, meaning the numerical mapping technique could effectively enhance the simulation accuracy and could reflect the experimental blast wave propagation.
AqueletNSouliM (2008) 2D to 3D ALE mapping. In: The 10th International LS-DYNA users conference, June 8-10,2008, Dearborn, Michigan USA, pp. 23–34.
2.
BogosianDFerrittoJShiY (2002) Measuring uncertainty and conservatismin simplified blast models. In: Proceeding of the 30th explosives safety seminar, August 2002,Atlanta, Georgia USA, pp. 1–26.
3.
ChapmanTCRoseTASmithPD (1995) Blast wave simulation usingAUTODYN2D: a parametric study. International Journal of Impact Engineering16(516): 777–787.
4.
ChengDSHungCWPiSJ (2013) Numerical simulation of near-field explosion. Journal of Applied Science and Engineering16(No. 1): 61–67.
5.
Department of the Army (1990) Structures to Resist the Effects of Accidential Explosions TM5-1300, USA, pp. 1–1867.
6.
Department of the Army (1998) Design and Analysis of Hardened Structures to Conventional Weapon Effects TM5-855-1, USA, pp. 1–50.
7.
Department of Defense (2002) Design and Analysis of Hardened Structures to Conventional Weapons Effects,” UFC 3-340-01. USA.
8.
KlomfassA (2008) Numerical investigation of fluid dynamic instabilities and pressure fluctuations in the near field of a detonation. In: Proceeding of the 20th International symposium on military aspects of blast and shock conference, Wollongong, Australia, 15–20 November 2020, pp. 1–13.
9.
LacambreJDelmasL (2011) Using LS-DYNA MM-ALE capabilities to help design a wall mitigating accidental blast effects. In: The 8th European LS-DYNA users conference, Strasbourg, France, 23–24 May 2011, pp. 1–6.
10.
LapooujadeVVan DorsselaerNKevorkianS, et al. (2010) “A study of mapping technique for air blast modeling”. In: The 11th International LS-DYNA users conference, Salzburg, Austria, 9–11 May 2017, pp. 23–32.
11.
MainieroRJWeissES (1995) Blast wave propagation in underground mines. In: Proceedings of the 11th annual symposium on explosives and blasting research, Nashville, TN, 5–9 February 1994.
12.
MuzychukEMayselessMBelskyI (2005) Influence of the post detonation burning process on blast wave parameters in air. In: The 22nd InternationalSymposium on Ballistics, Vancouver, Canada, 14–18 November 2005, pp. 536–543.
13.
NgoTMendisPGuptaA, et al. (2007) Blast loading and blast effects on structures: an overview. Electronic Journal of Structural Engineering, Special Issue: Loading on Structures: 76–91.
14.
PiSJChengDSChengH, et al. (2012) Fluid–structure-interaction for a steel plate subjected to non-contact explosion. Theoretical and Applied Fracture Mechanics59: 1–7.
15.
SlavikTP (2009) A coupling of empirical explosive blast loads to ALE air domains in LS-DYNA. In: The 7th European LS-DYNA Users Conference, Salzburg, Austria, 14–15 May 2009, pp. 1–10.
16.
ThamCY (2009) Numerical simulation on the interaction of blast waves with a series of aluminum cylinders at near-field. International Journal of Impact Engineering36(1): 122–131.
17.
Van DorsselaerNLapoujadeV (2010) A contribution to new ALE 2D methodValidation. In: The 11th International LS-DYNA Users Conference, Salzburg, Austria, 9–11 May 2017, pp. 39–50.
18.
WuCQHaoH (2005) Modeling of simultaneous ground shock and air blast pressure on nearby structures from surface explosions. International Journal of Impact Engineering31(6): 699–717.
19.
ZakrissonBWikmanBHäggbladHÅ (2011) Numerical simulations of blast loads and structural deformation from near-field explosions in air. International Journal of Impact Engineering38(7): 597–612.
