Prediction of the collapse time of an outdoor storage tank under rainfall due to internal steam condensation

Abstract

Thin-walled storage tanks are prone to vacuum collapse due to the development of a net external pressure. Condensation of steam inside the vessel can cause a rapid development of this mode of failure. External atmospheric conditions also affect the process; specifically, the enhanced heat transfer associated with rainfall on the vessel external surface accelerates the collapse process. Short but intense rain storms are becoming more common. An expression to predict the time taken for a storage vessel to collapse while subject to external rainfall is developed. Good agreement was found between the predictions of the modelling techniques and the experimentally obtained results. It is shown that the thermal energy stored in the vessel wall is very significant in determining the collapse time especially for outdoor vessels exposed to rain.

Keywords

storage vessel vacuum collapse steam condensation external rainfall

Get full access to this article

View all access options for this article.

References

Myers

P. E.

Aboveground storage tanks, 1997, (Mc-Graw-Hill, New York).

Met Office.Available from www.metoffice.gov.uk.

Irish Times, 2008August8.

The Independent, 2009November20.

Smith

J. A.

Hui

Steiner

Baeck

M. L.

Krajewski

W. F.

Ntelekos

A. A.

Variability of rainfall rate and raindrop size distributions in heavy rain. Water Resour. Res., 2009, 45W04430. DOI: 10.1029/2008WR006840.

Cronin

Baker

Prediction of the collapse time of a process storage vessel due to internal steam condensation. Proc. IMechE, Part E: J. Process Mechanical Engineering, 2006, 220, 89–98DOI: 10.1243/09544089JPME83.

Cronin

Davis

Analysis of the variability in collapse time of a process storage vessel due to internal steam. Proc. IMechE, Part E: J. Process Mechanical Engineering, 2008, 222(2), 171–181DOI: 10.1243/09544089JPME170.

De Nevers

Vacuum collapse of vented tanks. Process Safety Prog., 1996, 15(2), 74–79.

Allen

H. G.

Bulson

P. S.

Background to buckling, 1980, (McGraw-Hill, London).

10.

Bergman

E. O.

The design of vertical pressure vessels subjected to applied forces. ASME Trans., 1955.

11.

Guggenberger

Buckling and Postbuckling of imperfect cylindrical shells under external pressure. Thin-walled Struct., 1995, 23, 351–366.

12.

Aghajari

Abedi

Showkati

Buckling and postbuckling behaviour of thin-walled cylindrical steel shells with varying thickness subjected to uniform external pressure. Thin-walled Struct., 2006, 44, 904–909.

13.

De Paor

Kelliher

Cronin

Wright

Finite element model calibration using experimental data from vacuum induced buckling collapse of thin-walled cylinders

In Proceedings of the ASME 2010 Pressure Vessels & Piping Division

July 2010

Washington, USA.

14.

Kumanna

J. D.

Kothari

S. P.

Predict storage-tank heat transfer precisely. Chem. Eng., 1982, 10(5), 127–132.

15.

Mednik

R. L.

Colver

C. P.

Heat transfer from a cylinder in an air–water spray flow stream. AIChE J., 1969, 15(3), 357–361.

16.

Cengel

Y. A.

Introduction to thermodynamics and heat transfer, 1997, (McGraw-Hill, Boston).

17.

Mason

B. J.

Physics of a raindrop. Phys. Bull, 1978, 29, 364–369.

18.

Hodson

M. C.

Raindrop size distribution. J. Clim. Appl. Meteorol., 1986, 25, 1070–1074.

19.

Ulbrich

C. W.

Natural variations in the analytical form of the raindrop size distribution. J. Clim. Appl. Meteorol., 1983, 22, 1764–1775.