Integrated dual-cycle energy recovery using thermoelectric conversion and an organic Rankine bottoming cycle

Abstract

Hot engine exhaust represents a resource that is often rejected to the environment without further utilization. This resource is most prevalent in the transportation sector, but stationary engine—generator systems also typically do not utilize this resource. Engine exhaust is considered high-grade heat and can potentially be utilized by various approaches to produce electricity or to drive heating and cooling systems. One idea for this application is to combine an organic Rankine cycle and thermoelectric conversion. This approach is being developed to more fully utilize the thermal energy contained in hot exhaust streams. The model developed here is composed of a high-temperature heat exchanger which extracts thermal energy for driving the thermoelectric conversion elements and a closely integrated bottoming cycle to capture the large amount of remaining thermal energy in the exhaust stream. Many interacting parameters that define combined system operation are employed in the model to determine the overall system performance including output power, efficiency, and total energy utilization factors. In addition, the model identifies a maximum power operating point for the combined system. The model can identify the optimal amount of heat to remove from the exhaust flow to drive the thermoelectric elements for maximizing the combined cycle output. The model has been developed such that heat exchanger UA _H (heat transfer coefficient multiplied by heat transfer area) values, thermal resistances, and the thermoelectric figure of merit (ZT) can be investigated in the context of system operation. The model also has the ability to simultaneously determine the effect of each cycle design parameter on the performance of the overall system, thus giving the ability to utilize as much waste heat as possible. Results of exercising the model give system performance and inter-relationships between various design parameters as they affect overall performance.

Keywords

waste heat recovery thermoelectric generator Rankine cycle

Get full access to this article

View all access options for this article.

References

Davis

S. C.

Duegel

S. W.

, Transportation energy data book 25th edition, 2004, 2002, (US Department of Energy, Office of Energy Efficiency and Renewable Energy, Oak Ridge National Laboratory 2004) 2002.

Pellegrino

J. L.

Margolis

Justiniano

, Energy use, loss, and opportunity analysis: US manufacturing and mining (Columbia, Maryland: Energetics, Inc. 2004) and E3M, Inc., North Potomac, Maryland).

Hendricks

T. J.

Lustbader

J. A.

, ‘Advanced thermoelectric power system investigations for light-duty and heavy-duty vehicle applications: Part I’ In Proceedings of the 21st International Conference on Thermoelectrics, Long Beach, California, IEEE Catalogue #02TH8657, 2002, pp. 381–386.

Peterson

R. B.

Wang

Herron

, ‘Performance of a small-scale regenerative Rankine power cycle employing a scroll expander’ Power Energy 222 (3) (2008): 271–282.

Williams

S. G. K.

Rowe

D. M.

Kaliazin

, ‘Improved thermoelectric modules for electrical power generation using low temperature waste heat’ In Proceedings of the 5th European Workshop on Thermoelectrics, Pardubice, Czech Republic, 1999, pp. 93–98.

Dresselhaus

M. S.

Chen

Tang

M. Y.

, ‘New directions for low-dimensional thermoelectric materials’ Adv. Mater. 19 (2002): 1043.

Nolas

G. S.

Poon

Kanatzidis

, ‘Recent developments in bulk thermoelectric materials’ MRS Bulletin 31 (2002): 199.

Matsuura

Rowe

D. M.

Rowe

D. M.

, ‘Low-temperature heat conversion’ In CRC handbook of thermoelectrics (Boca Raton, Florida: CRC 1995): 573–593.

Rowe

D. M.

Min

S. G.

Williams

Aoune

Matsuura

Kuznetsov

V. L.

, ‘Thermoelectric recovery of waste heat —“case studies’ In Proceedings of the 32nd International Energy Conversion Engineering Conference, Honolulu, Hawaii, 1997, vol. 2, pp. 1075–1079.

10.

Tritt

T. M.

Subramanian

M. A.

, ‘Thermoelectric materials, phenomena, and applications: a bird's eye view’ M.A., Mater. Res. Soc. Bull. 31 (3) (2006): 188.

11.

Poudel

Hao

Q. H.

, ‘High-thermoelectric performance of nanostructured bismuth antimony telluride bulk alloys’ (2008): Sciencexpress, 10.1126.science.1156446.

12.

Hung

T. C.

Shai

T. Y.

Wang

S. K.

, ‘A review of organic Rankine cycles (ORCs) for the recovery of low-grade waste heat’ Energy 22 (1991): 661–667.

13.

Bronicki

K. Y.

Elovic

Rettger

, ‘Experience with organic Rankine cycles in heat recovery power plants’ In Proceedings of the 58th American Power Conference, Chicago, Illinois, 1996, Part 2, pp. 1086–1089.

14.

Hendricks

T. J.

, ‘Thermal system interactions in optimizing advanced thermoelectric energy recovery systems’ Energy Resour. Technol. 129 (3) (2007): 223–231.

15.

Hendricks

T. J.

, ‘Microtechnology — a key to system miniaturization in advanced energy recovery & conversion systems’ In Proceedings of the ASME 2nd International Conference on Energy sustainability, Jacksonville, Florida, 2008, ASME paper no. ES2008-54244.

16.

Decher

, Direct energy conversion (Oxford, UK: Oxford University Press 1997): 240–252.

17.

Angrist

S. W.

, Direct energy conversion (Boston, Massachusetts: Allyn and Bacon, Inc. 1982): 121–171.

18.

Holman

, Heat transfer 4th edition, (New York: McGraw-Hill 1976): 45–49.

19.

Lienhard

, A heat transfer textbook (Englewood Cliffs, New Jersey: Prentice-Hill 1981): 65–68.

20.

Moran

M. J.

Shapiro

H. N.

, Fundamentals of engineering thermodynamics 5th edition, (Hoboken, New Jersey: John Wiley & Sons 2004): 347–397.

21.

Miller

E. W.

Hendricks

T. J.

Peterson

R. B.

, ‘Modeling energy recovery using thermoelectric conversion integrated with an organic Rankine bottoming cycle’ J. Electron. Mater. 38 (7) (2009): 1206–1213.