Abstract
Bio-based vitrimers have attracted considerable attention because of their carbon neutrality, healability, and recyclability, which contribute to resource saving and energy saving. The reactions of vanillin with cystamine and 1,6-diaminohexane yielded a phenolic hardener containing both imine and disulfide groups (DVNCTA) and a phenolic hardener containing only imine groups (DVNDAH), respectively. These hardeners were utilized to cure epoxy resin mixtures comprising bio-based polyglycerol polyglycidyl ether (PGPE) and petroleum-based flexible poly (ethylene glycol) diglycidyl ether (PEGDGE) in varying molar ratios. The cross-linking density, glass transition temperature, and mechanical strength of the DVNCTA-cured epoxy vitrimers diminished as the ratio of PGPE to PEGDGE decreased. Remarkably, all cured products underwent at least three successful self-healing cycles by standing at room temperature for 24 h. The tensile strength-based healing efficiency (ησ) of the DVNCTA-cured epoxy vitrimers improved with decreasing PGPE to PEGDGE ratios, reaching a maximum ησ (100%) at PGPE/PEGDGE ratio of 1/2. Notably, when comparing DVNCTA- and DVNDAH-cured epoxy vitrimers with identical PGPE/PEGDGE ratios, the former exhibited significantly superior healing performance.
Keywords
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
