Rice husk ash: Economical and high-quality natural-based reinforcing filler for linear low-density and high-density polyethylene

Abstract

Rice husk ash (RiHA) was employed as the bio-originated and inexpensive filler prepared from agricultural wastes for reinforcing high-density polyethylene (HDPE) and linear low-density polyethylene (LLDPE). X-ray fluorescence (XRF) spectroscopy showed ∼80.82% for the silica content of RiHA as well as the values of other components present in this bio-based filler. The composites were obtained via melt mixing followed by the compression molding by the hot press forming. Characterization of the composites by FT-IR spectroscopy revealed that the filler has the sheer effects on the vibrational bands of the polymers. The usage of X-ray diffraction (XRD) analysis to investigate the d-spacing values and the crystallinity of the samples, exhibited the increase of d-spacing upon reinforcing the polymers with RiHA. The scanning electron microscopy (SEM) images showed an average size of 32 µm for the irregular RiHA particles which uniformly dispersed in the polymeric matrices. The energy dispersive X-ray (EDX) analysis displayed C, O, and Si as the main constituting elements of the composites and alternatively confirmed the well dispersion of the filler particles into the polymer matrices. The mechanical measurements showed the significant improvements in Young’s modulus, yield stress, and hardness results of the polymers after reinforcing with the rice husk ash. For example, Young’s modulus of HDPE was increased ∼15% after incorporating 7 wt.% of RiHA into this polymer. These mechanical properties of the polymers were increased upon increasing the RiHA content, while the parameter of elongation at break was decreased.