DovlatabadiS. Effects of kenaf filler reinforcement on mechanical properties of molded polypropylene composites: a particle size study. Polym Renew Resour2020; 11: 64–68.
2.
OstadiHHakimabadiSGNabaviF, et al.Enzymatic and soil burial degradation of corn starch/glycerol/sodium montmorillonite nanocomposites. Polym Renew Resour2020; 11: 15–29.
3.
RomagnolliCMLeiteGPRodriguesTA, et al.Blend of cassava starch and high-density polyethylene with green tea for food packaging. Polym Renew Resour2020; 11: 3–14.
4.
NgWKChowWSIsmailH. Thermal properties enhancement of poly (lactic acid) by corn cob cellulose nanocrystals. Polym Renew Resour2019; 10: 63–76.
5.
GaddamSKPalanisamyA. Ionizable polyol from cottonseed oil for anionic waterborne polyurethane-silanol dispersions. Polym Renew Resour2019; 10: 77–94.
6.
MullerLCMarxSVoslooHC, et al.Functionalising lignin in crude glycerol to prepare polyols and polyurethane. Polym Renew Resour2019; 10: 3–18.
7.
SeidiFArabi ShamsabadiAEbadi AmooghinA, et al.Biopolymer-based membranes from polysaccharides for CO2 separation: a review. Environ Chem Lett2022; 20: 1–46.
8.
ShokriZSeidiFSaebMR, et al.Elucidating the impact of enzymatic modifications on the structure, properties, and applications of cellulose, chitosan, starch and their derivatives: a review. Mater Today Chem2022; 24: 100780.
9.
KordashtHKHasanzadehMSeidiF, et al.Poly (amino acids) towards sensing: recent progress and challenges. Trac Trends Anal Chem2021; 140: 116279.
10.
SeidiFZhaoWXiaoH, et al.Layer‐by‐Layer Assembly for Surface Tethering of Thin‐Hydrogel Films: Design Strategies and Applications. Hoboken, NJ: Wiley Online Library, 2020.
MirzaieASeidiFHasanzadehM, et al.Low fouling and ultra-sensitive electrochemical screening of ractopamine using mixed self-assembly of PEG and aptamer immobilized on the interface of poly (dopamine)/GCE: A new apta-platform towards point of care (POC) analysis. Microchemical J2021; 171: 106853.
13.
FeiYChenFFangW, et al.Conductive thermoplastic polyurethane nanocomposite foams derived from a cellulose/MWCNTs aerogel framework: simultaneous enhancement of piezoresistance, strength, and endurance. J Mater Chem C2021; 9: 13103–13114.
14.
FeiYChenFFangW, et al.High-strength, flexible and cycling-stable piezo-resistive polymeric foams derived from thermoplastic polyurethane and multi-wall carbon nanotubes. Composites B: Eng2020; 199: 108279.
15.
RodriguezSTorresFGArroyoJ, et al.Synthesis of highly stable κ/ι-hybrid carrageenan micro-and nanogels via a sonication-assisted microemulsion route. Polym Renew Resour2020; 11: 69–82.
16.
FeiYJiangRFangW, et al.Highly sensitive large strain cellulose/multiwalled carbon nanotubes (MWCNTs)/thermoplastic polyurethane (TPU) nanocomposite foams: from design to performance evaluation. J Supercrit Fluids2022. DOI:10.1016/j.supflu.2022.105653
17.
SeidiFJinYXiaoH. Polycyclodextrins: synthesis, functionalization, and applications. Carbohydr Polym2020; 242: 116277.
18.
SaadatiAHasanzadehMSeidiF. Biomedical application of hyperbranched polymers: recent advances and challenges. Trac Trends Anal Chem2021; 142: 116308.
19.
SeidiFReza SaebMHuangY, et al.Thiomers of chitosan and cellulose: effective biosorbents for detection, removal and recovery of metal ions from aqueous medium. Chem Rec2021; 21: 1876–1896.
20.
KuangTZengRHejnaA, et al.Pressure-induced flow processing behind the superior mechanical properties and heat-resistance performance of poly (butylene succinate). E-Polymers2022; 22: 156–164.
21.
JuJKuangTKeX, et al.Lightweight multifunctional polypropylene/carbon nanotubes/carbon black nanocomposite foams with segregated structure, ultralow percolation threshold and enhanced electromagnetic interference shielding performance. Composites Sci Tech2020; 193: 108116.
22.
SeidiFDengCZhongY, et al.Functionalized masks: powerful materials against COVID‐19 and future pandemics. Small2021; 17: 2102453.
HanLMaFChenS, et al.Effect of short basalt fibers on durability, mechanical properties, and thermal properties of polylactic acid composites. Polym Renew Resour2019; 10: 45–59.
25.
KuangTChenSGuZ, et al.A facile approach to fabricate load-bearing porous polymer scaffolds for bone tissue engineering. Adv Composites Hybrid Mater2022. DOI:10.1007/s42114-022-00418-1
26.
KuangTJuJLiuT, et al.A facile structural manipulation strategy to prepare ultra-strong, super-tough, and thermally stable polylactide/nucleating agent composites. Adv Composites Hybrid Mater2022. DOI:10.1007/s42114-021-00390-2
27.
JuJGuZLiuX, et al.Fabrication of bimodal open-porous poly (butylene succinate)/cellulose nanocrystals composite scaffolds for tissue engineering application. Int J Biol Macromolecules2020; 147: 1164–1173.
28.
ChenZHuJJuJ, et al.Fabrication of poly (butylene succinate)/carbon black nanocomposite foams with good electrical conductivity and high strength by a supercritical CO2 foaming process. Polymers2019; 11: 1852.
29.
JuJPengXHuangK, et al.High-performance porous PLLA-based scaffolds for bone tissue engineering: preparation, characterization, and in vitro and in vivo evaluation. Polymer2019; 180: 121707.
30.
HuangAPengXGengL, et al.Electrospun poly (butylene succinate)/cellulose nanocrystals bio-nanocomposite scaffolds for tissue engineering: preparation, characterization and in vitro evaluation. Polym Test2018; 71: 101–109.
31.
KuangTJuJYangZ, et al.A facile approach towards fabrication of lightweight biodegradable poly (butylene succinate)/carbon fiber composite foams with high electrical conductivity and strength. Composites Sci Tech2018; 159: 171–179.
32.
GengLLiLMiH, et al.Superior impact toughness and excellent storage modulus of poly (lactic acid) foams reinforced by shish-kebab nanoporous structure. ACS Appl Mater Inter2017; 9: 21071–21076.
33.
BariSSChatterjeeAMishraS. Biodegradable polymer nanocomposites: an overview. Polym Rev2016; 56: 287–328.
34.
KuangTZhangMLianX, et al.External flow-induced highly oriented and dense nanohybrid shish-kebabs: a strategy for achieving high performance in poly (lactic acid) composites. Composites Commun2022; 29: 101042.
35.
ShiXPengXZhuJ, et al.Synthesis of DOPO-HQ-functionalized graphene oxide as a novel and efficient flame retardant and its application on polylactic acid: Thermal property, flame retardancy, and mechanical performance. J Colloid Interface Science2018; 524: 267–278.
36.
KuangTChenFChangL, et al.Facile preparation of open-cellular porous poly (l-lactic acid) scaffold by supercritical carbon dioxide foaming for potential tissue engineering applications. Chem Eng J2017; 307: 1017–1025.
37.
KuangTChangLChenF, et al.Facile preparation of lightweight high-strength biodegradable polymer/multi-walled carbon nanotubes nanocomposite foams for electromagnetic interference shielding. Carbon2016; 105: 305–313.
38.
KuangT-RMiH-YFuD-J, et al.Fabrication of poly (lactic acid)/graphene oxide foams with highly oriented and elongated cell structure via unidirectional foaming using supercritical carbon dioxide. Ind Eng Chem Res2015; 54: 758–768.
39.
ReddyMMVivekanandhanSMisraM, et al.Biobased plastics and bionanocomposites: current status and future opportunities. Prog Polym Sci2013; 38: 1653–1689.
40.
AnF-ZWangZ-WHuJ, et al.Morphology control technologies of polymeric materials during processing. Macromolecular Mater Eng2014; 299: 400–423.
41.
WangKChenFLiZ, et al.Control of the hierarchical structure of polymer articles via “structuring” processing. Prog Polym Sci2014; 39: 891–920.
42.
GhoshSVianaJCReisRL, et al.Oriented morphology and enhanced mechanical properties of poly(l-lactic acid) from shear controlled orientation in injection molding. Mater Sci Eng A2008; 490: 81–89.
43.
GaoPKunduACoulterJ. Vibration-assisted injection molding: an efficient process for enhanced crystallinity development and mechanical characteristics for poly lactic acid. Int J Adv Manuf Technol 2022. DOI:10.1007/s00170-022-09522-4
44.
XuHZhongG-JFuQ, et al.Formation of shish-kebabs in injection-molded poly (L-lactic acid) by application of an intense flow field. ACS Applied Materials Interfaces2012; 4: 6774–6784.
45.
XuHXieLChenJ-B, et al.Strong and tough micro/nanostructured poly (lactic acid) by mimicking the multifunctional hierarchy of shell. Mater Horizons2014; 1: 546–552.
46.
XieX-LSunQ-SLeiJ, et al.A nacre-mimetic superstructure of poly (butylene succinate) structured by using an intense shear flow and ramie fiber as a promising strategy for simultaneous reinforcement and toughening. J Mater Chem A2017; 5: 22697–22707.
47.
HuMDengCGuX, et al.Manipulating the strength–toughness balance of poly (l-lactide)(PLLA) via introducing ductile poly (ε-caprolactone)(PCL) and strong shear flow. Ind Eng Chem Res2019; 59: 1000–1009.
48.
LiuTLianXLiL, et al.Facile fabrication of fully biodegradable and biorenewable poly (lactic acid)/poly (butylene adipate-co-terephthalate) in-situ nanofibrillar composites with high strength, good toughness and excellent heat resistance. Polym Degrad Stab2020; 171: 109044.
HeYYangZ-tQuJ-p. Super-toughened poly (lactic acid)/thermoplastic poly (ether) urethane nanofiber composites with in-situ formation of aligned nanofibers prepared by an innovative eccentric rotor extruder. Composites Sci Tech2019; 169: 135–141.
51.
HeYXuW-HZhangH, et al.Constructing bone-mimicking high-performance structured poly (lactic acid) by an elongational flow field and facile annealing process. ACS Appl Mater Inter2020; 12: 13411–13420.
52.
ZhangSFengXZhuS, et al.Novel toughening mechanism for polylactic acid (PLA)/starch blends with layer-like microstructure via pressure-induced flow (PIF) processing. Mater Lett2013; 98: 238–241.
53.
FengXZhangSZhuS, et al.Study on biocompatible PLLA–PEG blends with high toughness and strength via pressure-induced-flow processing. RSC Advances2013; 3: 11738–11744.
54.
ZhangXXuYZhangX, et al.Progress on the layer-by-layer assembly of multilayered polymer composites: strategy, structural control and applications. Prog Polym Sci2019; 89: 76–107.
55.
LiCJiangTWangJ, et al.In situ formation of microfibrillar crystalline superstructure: achieving high-performance polylactide. ACS Appl Mater Inter2017; 9: 25818–25829.
56.
LiCGuoJJiangT, et al.Extensional flow-induced hybrid crystalline fibrils (shish) in CNT/PLA nanocomposite. Carbon2018; 129: 720–729.
57.
XieLXuHNiuB, et al.Unprecedented access to strong and ductile poly (lactic acid) by introducing in situ nanofibrillar poly (butylene succinate) for green packaging. Biomacromolecules2014; 15: 4054–4064.
58.
XieLXuHLiL-B, et al.Biomimetic nanofibrillation in two-component biopolymer blends with structural analogs to spider silk. Scientific Reports2016; 6: 1–11.
59.
RajASamuelCMalladiN, et al.Enhanced (thermo) mechanical properties in biobased poly (l‐lactide)/poly (amide‐12) blends using high shear extrusion processing without compatibilizers. Polym Eng Sci2020; 60: 1902–1916.
60.
SuiGWangKXuS, et al.The combined effect of reactive and high-shear extrusion on the phase morphologies and properties of PLA/OBC/EGMA ternary blends. Polymer2019; 169: 66–73.
61.
LopesHOliveiraGTalabiS, et al.Production of thermoplastic starch and poly (butylene adipate-co-terephthalate) films assisted by solid-state shear pulverization. Carbohydr Polym2021; 258: 117732.
