The synthesis and full characterisation, including in one case via single crystal X-ray diffraction, of two novel bio-derived aromatic monomers are reported. These materials, incorporating a Eugenol or Vanillin molecular skeleton are modified to incorporate diol chains obtained from reaction with glycerine carbonate. They are further characterised by the presence of other groups (e.g., allyl) which are also capable of engendering polymerisation. Facile heat induced self-polymerization is noted in one of the new monomers. The compounds are further tested in block co-polymer synthesis and found to form blocks with simple co-monomers such as succinic acid.
Get full access to this article
View all access options for this article.
References
1.
a) AuvergneR., CaillolS., DavidG., BoutevinB., PascaultJ.-P., Chem. Rev., 114 (2014) 1082; b) T. Saito, J.H. Perkins, D.C. Jackson, N.E. Trammel, M.A. Hunt, A.K. Naskar, RSC Adv., 3 (2013) 21832; c) P.A. Wilbon, F. Chu, C. Tang, Macromol. Rapid Commun., 34 (2013) 8; d) R. Mülhaupt, Macromol. Chem. Phys., 214 (2013) 159; e) D. Segupta, R.W. Pike, Chemicals from Biomass, CRC Press, NY, U.S.A. (2013); f) I.I. Moiseev, Russ. Chem. Rev., 82 (2013) 616; g) M.N. Belgacem, A. Gandini (Eds.), Monomers, Polymers and Composites from Renewable Resources, Elsevier, Boston, U.S.A. (2008); h) M.N. Satheesh Kumar, A.K. Mohanty. L. Erikson, M. Misra, J. Biobased Mater. Bioenergy, 3 (2009) 1; i) D. Feldman, M. Lacasse, L.M. Beznaczuk, Prog. Polym. Sci., 12 (1986) 271; j) S. Laurichesse, L. Avérous, Prog. Polym. Sci., 39 (2014) 1266; k) N. Hernández, R.C. Williams, E.W. Cochran, Org. Biomol. Chem., 12 (2014) 2834; l) T. Iwata, Angew. Chem. Int. Ed., 54 (2015) 3210.
2.
a) DohertyW.O.S., MousaviounP., FellowsC.M., Ind. Crops Prod., 33 (2011) 259; b) Suhas, P.J.M. Carrott, M.M.L. Ribeiro Carrott, Bioresource Technol., 98 (2007) 2301; c) S.E. Lebo, Jr., J.D. Gargulak, T.J. McNally, Encyclopedia of Polymer Science and Technology, Vol. 3, 4th Ed. Wiley, NY, U.S.A., pp. 100–124 (2002); d) H. Wang, J. Male, Y. Wang, ACS Catal., 3 (2013) 1047; e) N. Teramoto, Synthetic Green Polymers from Renewable Monomers in SharmaS.K., MudhooA. (Eds.) A Handbook of Applied Biopolymer Technology: Synthesis, Degradation and Applications, RSC, London, U.K., Chapter 2 (2011); f) J.D.P. Araújo, C.A. Grande, A.E. Rodrigues, Chem. Eng. Res. Design, 88 (2010) 1024; g) P.D. Sainsbury, E.M. Hardiman, M. Ahmad, H. Otani, N. Seghezzi, L.D. Eltis, T.D.H. Bugg, ACS Chem. Biol., 8 (2013) 2151; h) S.A. Miller, Polym. Chem., 5 (2014) 3117; i) A.G. Pemba, M. Rostagno, T.A. Lee, S.A. Miller, Polym. Chem., 5 (2014) 3214.
3.
a) YaoK., TangC., Macromolecules, 46 (2013) 1689; b) D. Konkolewicz, Y. Wang, M. Zhong, P. Krys, A.A. Isse, A. Gennaro, K. Matyjaszewski, Macromolecules, 46 (2013) 8749; c) T. Mekonnen, P. Mussone, H. Khalil, D. Bressler, J. Mater. Chem. A, 1 (2013) 13379; d) P.Y. Dapsens, C. Mondelli, J. Pérez-Ramírez, ACS Catal., 2 (2012) 1487; e) C.-H. Zhou, X. Xia, C.-X. Lin, D.-S. Tong, J. Beltramini, Chem. Soc. Rev., 40 (2011) 5588; f) D.F. Grishin, I.D. Grishin, Russ. J. Appl. Chem., 84 (2011) 2021; g) F. de Lena, K. Matyjaszewski, Prog. Polym. Sci., 35 (2010) 959; h) K. Matyjaszewski, N.V. Tsarevsky, Nature Chem., 1 (2009) 276; i) N.V. Tsarevsky, K. Matyjaszewski, Chem. Rev., 107 (2007) 2270.
4.
a) RamgrenS.D., HieL., YeY., GargN.K., Org. Lett., 15 (2013) 3950; b) P.G. Jessop, D.A. Jessop, D. Fu, L. Phan, Green Chem., 14 (2012) 1245; c) P. G. Jessop, Green Chem., 13 (2011) 1391; d) T. Erdmenger, C. Guerrero-Sanchez, J. Vitz, R. Hoogenboom, U.S. Schubert, Chem. Soc. Rev., 39 (2010) 3317.
5.
a) KhanA., LoughA.J., GossageR.A., FoucherD.A., Dalton Trans., 42 (2013) 2469; b) S. Resanović, R.S. Wylie, J.W. Quail, D.A. Foucher, R.A. Gossage, Inorg. Chem., 50 (2011) 9930; c) C.R. Eisnor, R.A. Gossage, P.N. Yadav, Tetrahedron, 62 (2006) 3395.
6.
a) KibetJ., KhachatryanL., DellingerB., Environ. Sci. Technol., 46 (2012) 12994; b) M. Tymchyshyn, C. Xu, Bioresource Technol., 101 (2010) 2483; c) J. Akhtar, S.K. Kuang, N.S. Amin, Renewable Ener., 35 (2010) 1220; d) A. Liu, Y. Park, Z. Huang, B. Wang, R.O. Ankumah, P.K. Biswas, Energy Fuels, 20 (2006) 446.
7.
a) SadlerJ.M., NguyenA.-P.T., ToulanF.R., SzaboJ.P., PalmeseG.R., ScheckC., LutgenS., La ScalaJ.J., J. Mater. Chem. A, 1 (2013) 12579; b) L. Mejias, M.H. Reihmann, S. Sepulveda-Boza, H. Ritter, Macromol. Biosci., 2 (2002) 24; c) X. Li, A. Nicollin, A. Pizzi, X. Zhou, A. Sauget, L. Delmotte, RSC Adv., 3 (2013) 17732; d) A.S. Amarasekara, B. Wiredu, A. Razzaq, Green Chem., 14 (2012) 2395.
8.
a) HuX., WangY., MourantD., GunawanR., LievensC., ChaiwatW., GholizadehM., WuL., LiX., LiC.-Z., AIChE J., 59 (2013) 888; b) M. Firdaus, M.A.R. Meier, Eur. Polym. J., 49 (2013) 156; c) J.F. Stanzione III, J.M. Sadler, J.J. La Scala, K.H. Reno, R.P. Wool, Green Chem., 14 (2012) 2346; d) M. Shibata, N. Teramoto, T. Shimasaki, M. Ogihara, Polymer J., 43 (2011) 916.
9.
a) BilelH., HamdiN., ZagroubaF., FischmeisterC., BruneauC., RSC Adv., 2 (2012) 9584; b) L. Rojo, B. Vazquez, J. Parra, A. López Bravo, S. Deb, J. San Roman, Biomacromolecules, 7 (2006) 2751; c) E.A. Rahim, F. Sanda, T. Masuda, Polym. Bull., 52 (2004) 93; d) E.A. Rahim, F. Sanda, T. Masuda, J. Macromol. Sci., A41 (2004) 133. 10. a) M.B. Hocking, J. Chem. Educ., 74 (1997) 1055; b) R. Kumar, P.K. Sharma, P. Shanker Mishra, Int. J. PharmTech Res., 4 (2012) 266; c) M. Fache, E. Darroman, V. Besse, R. Auvergne, S. Caillol, B. Boutevin, Green Chem., 16 (2014) 1987.
10.
WerthheimE., Textbook of Organic Chemistry (2nd Ed.), Blakiston, Toronto, Canada, pp. 553–554 (1947).
11.
a) Ochoa-GómezJ.R., Gómez-Jiménez-AberasturiO., Ramírez-LópezC., BesuéM., Org. Process Res. Dev., 16 (2012) 389; b) A. Behr, J. Eilting, J. Leschinski, F. Lindner, K. Irawadi, Green Chem., 10 (2008) 13; c) C.-H. Zhou, J.N. Beltramini, Y.-X. Fan, G.O. Lu, Chem. Soc. Rev., 37 (2008) 527.
12.
a) DialloA.K., AnnuziataL., FouquayS., MichaudG., SimonF., BrussonJ.-M., GuillaumeS.M., CarpentierJ.-F., Polym. Chem., 5 (2014) 2583; b) M.O. Sonnati, S. Amigoni, E.P. Taffin de Givenchy, T. Daranin, O. Choulet, F. Guittard, Green Chem., 15 (2013) 283; c) B. Nohra, L. Candy, J.-F. Blanco, C. Guerin, Y. Raoul, Z. Mouloungui, Macromolecules, 46 (2013) 3771; d) Y. Gu, F. Jérôme, Chem. Soc. Rev., 42 (2013) 9550; e) Z. Zhang, D.W. Rackemann, W.O.S. Doherty, I.M. O'Hara, Biotechnol. Biofuels, 6 (2013) 153; f) R.H. Lambeth, T.J. Henderson, Polymer, 54 (2013) 5568; g) V Besse, F. Camara, C. Voirin, R. Auvergne, S. Caillol, B. Boutevin, Polym. Chem., 4 (2013) 4545; h) G.G. Sacripante, K. Zhou, M. Farooque, Macromolecules, 48 (2015) 6876.
13.
FarrugiaL.J., J. Appl. Crystallogr., 30, (1997), 565.
14.
For example: a) ŞahinO., BüyükgüngörO., ŞaşmazS., KantarC., Acta Crystallogr., E63 (2007) o4205; b) Y.-T. Wu, H.-Q. Li, X.-W. Shi, A.-L. Zhang, J.-M. Gao, Acta Crystallogr., E66 (2010) o2946; c) S. Öztürk, S. Işik, M. Akkurt, E. Ağar, S. Şaşmaz, H.K. Fun, Anal. Sci., 16 (2000) 663; d) C. Jarry, M. Goursolle, J.-M. Léger, A. Carpy, Acta Crystallogr., B38 (1982) 964.
15.
a) MotaC.J.A., da SilvaC.X.A., GonçalvesV.L.C., Quim. Nova, 32 (2009) 639; b) T.D. Inch, N. Williams J. Chem. Soc (C), (1970) 263; c) A.J. Showler, P.A. Darley, Chem. Rev., 67(1967) 427.
