The effect of several surface treatments on the tensile strength of piassava fibers is discussed in terms of the Weibull statistical distribution. It is shown that the Weibull modulus can be used as an indicative parameter of the degree of surface structural modifications caused by the surface treatments, refining the results obtained by the LSD statistical test. SEM analysis was used to independently characterize the fiber surface structural changes caused by the treatments and corroborates the results inferred from the Weibull modulus.
CouttsR.S.P.Banana fibres as reinforcement for building products, J. Mater. Sci. Letters, 9 (1990) 1235–1236.
2.
BoyardC.A., and d'AlmeidaJ.R.M.Morphological characterization and mechanical behavior of sponge gourd (Luffa cylindrica)-polyester composite materials, Polym.-Plast. Technol. Eng., 39 (2000) 489–499.
3.
d'AlmeidaA.L.F.S., BarretoD.W., CaladoV., and d'AlmeidaJ.R.M.Effects of derivatization treatment on sponge gourd (Luffa cylindrica) fibers, Polym. Polym. Comp., 14 (2006) 73–80.
4.
d'AlmeidaJ.R.M., AquinoR.C.M.P., and MonteiroS.N.Tensile mechanical properties, morphological aspects and chemical characterization of piassava (Attalea funifera) fibers, Comp. Part A, 37 (2006) 1473–1479.
5.
AquinoR.C.M.P., d'AlmeidaJ.R.M., and MonteiroS.N.Flexural mechanical properties of piassava fibers (Attalea funifera) – resin matrix composites. J. Mater. Sci. Letters, 20 (2001) 1017–1019.
HolberyJ., and HoustonD.Natural-fiber-reinforced polymer composites in automotive applications, JOM, 58(11) (2006) 80–86.
8.
AquinoR.C.M.P., MonteiroS.N., and d'AlmeidaJ.R.M.Evaluation of the critical fiber length of piassava (Attalea funifera) fibers using the pullout test, J. Mater. Sci. Letters, 22 (2003) 1495–1497.
9.
BledzkiA.K., ReihmaneS., and GassanJ.Properties and modification methods for vegetable fibers for natural fiber composites, J. Appl. Polym. Sci., 59 (1996) 1329–1336.
10.
RayD., SarkarB.K., RanaA.K., and BoseN.R.Effect of alkali treated jute fibres on composite properties, Bull. Mater. Sci., 24 (2001) 129–135.
11.
d'AlmeidaA.L.F.S., d'AlmeidaJ.R.M., BarretoD.W., and CaladoV.The effect of surface treatments on the thermal behavior and tensile strength of piassava (Attalea funifera) fibers, J. Appl. Polym. Sci., accepted.
12.
MontgomeryD.C., and RungerG.C.Applied Statistics and Probability for Engineers, 2nd ed., John Wiley and Sons, New York, 1999.
13.
WeibullW.A statistical distribution function of wide applicability, J. Appl. Mech., 18 (1951) 293–297.
14.
BiagiottiJ., PugliaD., and KennyJ.M.Kenny A Review on Natural Fibre Based Composites – Part I: Structure, Processing and Properties of Vegetable Fibres, J. Natur. Fibers, 1 (2004) 37–68.
15.
't HartW.G.J.Investigation of the length/strength dependency of carbon fibres and the related unidirectional composite strength, Report NLR TR 78050 U, National Aerospace Laboratory, Amsterdam, The Netherlands, 1978.
16.
ChawlaK.K.Composite Materials. Science and Engineering, SpringerVerlag, New York, 1987.
17.
MattosoL.H.C., FerreiraF.C., and CurveloA.A.S.Sisal fiber: morphology and applications in polymer composites, In: Lignocellulosic-Plastics Composites, LeãoA.L., CarvalhoF.X., and FrolliniE. (eds.), Unesp Publishers, Botucatu, Brazil, pp. 241–266, 1997.
18.
PrasadS.V., PavithramC., and RohatgiP.K.Alkali treatment of coir fibres for coir-polyester composites, J. Mater. Sci., 18 (1983) 1443–1454.
19.
CaladoV., BarretoD.W., and d'AlmeidaJ.R.M.The effect of a chemical treatment on the structure and morphology of coir fibers, J. Mater. Sci. Letters, 19 (2000): 2151–2153.
20.
SilvaF.A., ChawlaN., and Toledo FilhoR.D.Tensile behavior of high performance natural (sisal) fibers, Comp. Sci. Technol., 68 (2008) 3438–3443.
