Abstract
Treatment with a variable angle locking plate can, in theory, maintain near anatomic reduction of intra-articular distal radius fractures, but it is unknown to what extent reduction is maintained as measured by computed tomography. We assessed changes in radiographic fracture position 1 year post-operatively. We included 73 patients of whom 66 patients (90%) had radiographs available for review at 1 year post-operatively. We found a small (less than 2 mm or 2°) but statistically significant change in several measures. Accounting for inter-observer variability, this is probably within measurement error. We found no difference in change in fracture position or range of motion, grip strength or patient-reported outcome between the use of one or two distal rows of screws. Our results show that minimal changes in reduction can be expected after volar plate fixation in most patients. We recommend using only one screw row routinely, limiting costs, surgical time and the risk of misplacement of screws.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
