This paper proposes a diagnostic technique that can predict component degradation for a number of complex systems. It improves and clarifies the capabilities of a previously proposed diagnostic approach, by identifying the degradation severity of the examined components, and uses a 3D Principal Component Analysis approach to provide an explanation for the observed diagnostic accuracy. The diagnostic results are then used, in a systematic way, to influence maintenance decisions. Having been developed for the Auxiliary Power Unit (APU), the flexibility and power of the diagnostic methodology is shown by applying it to a completely new system, the Environmental Control System (ECS). A major conclusion of this work is that the proposed diagnostic approach is able to correctly predict the health state of two aircraft systems, and potentially many more, even in cases where different fault combinations result in similar fault patterns. Based on the engineering simulation approach verified here, a diagnostic methodology suitable from aircraft conception to retirement is proposed.
JennionsIK. (ed.). Integrated vehicle health management – perspectives on an emerging field, Warrendale, PA: SAE International, 2011.
4.
YabsleyAIbrahimY. Study on maintenance contribution to life cycle costs: aircraft auxiliary power unit example. In: Proceedings of the IEEE international conference on industrial technology, Chengdu, China, 2008. New York: IEEE. DOI: 10.1109/ICIT.2008.4608331.
5.
MofokengTMativengaPTMarnewickA.Analysis of aircraft maintenance processes and cost. Procedia CIRP2020; 90: 467–472.
6.
SklirosCAliFJennionsI.Experimental investigation and simulation of a Boeing 747 auxiliary power unit. J Eng Gas Turbine Power2020; 142(8): 081005.
7.
LiYG.Performance-analysis-based gas turbine diagnostics: a review. Proc IMechE, Part A: J Power and Energy2002; 216(5): 363–377.
8.
TahanMTsoutsanisEMuhammadM, et al. Performance-based health monitoring, diagnostics and prognostics for condition-based maintenance of gas turbines: a review. Appl Energy2017; 198: 122–144.
9.
BettocchiRPinelliMSpinaPR, et al. Artificial intelligence for the diagnostics of gas turbines – part 1: neural network approach. J Eng Gas Turbine Power2007; 129(3): 711–719.
10.
BettocchiRPinelliMSpinaPR, et al. Artificial intelligence for the diagnostics of gas turbines – part II: neuro-fuzzy approach. J Eng Gas Turbine Power2007; 129(3): 720–729.
11.
GorinevskyDDittmarKMylaraswamyD, et al. Model-based diagnostics for an aircraft auxiliary power unit. In: IEEE international conference on control applications, Glasgow, Scotland, UK, 2002.
12.
ViannaWOLGomesJPPGalvãoRKH, et al. Health monitoring of an auxiliary power unit using a classification tree. In: PHM 2011 proceedings of the annual conference prognostics and health management society, Montreal, QC, 2014, pp.293–299.
13.
PascoalRMViannaWOGomesJP, et al. Estimation of APU failure parameters employing linear regression and neural networks. In: PHM 2013 proceedings of the annual conference prognostics and health management society, New Orleans, LA, 2013, pp.664–670.
14.
GuralnikVMylaraswamyDVogesH. On handling dependent evidence and multiple faults in knowledge fusion for engine health management. In: 2006 IEEE aerospace conference, Big Sky, MT, 2006. New York: IEEE. DOI: 10.1109/AERO.2006.1656100.
15.
SklirosCAliFJennionsI.Fault simulations and diagnostics for a Boeing 747 auxiliary power unit. Expert Syst Appl2021; 184: 115504. DOI: 10.1016/j.eswa.2021.115504.
16.
JennionsIAliFMiguezME, et al. Simulation of an aircraft environmental control system. Appl Therm Eng2020; 172: 114925.
17.
NajjarNGuptaSHareJ, et al. Optimal sensor selection and fusion for heat exchanger fouling diagnosis in aerospace systems. IEEE Sens J2016; 16(12): 4866–4881.
18.
ShangLLiuG.Heat exchanger fouling detection in a simulated aircraft engine bleed air temperature control system. In: IEEE/ASME international conference on advanced intelligent mechatronics, AIM, Montreal, QC, 2010, pp.774–778. DOI: 10.1109/AIM.2010.5695895.
19.
ShahSLiuGGreatrixDR. On-line fouling detection of aircraft environmental control system cross flow heat exchanger. In: 2009 IEEE international conference on mechatronics automation ICMA2009, Changchun, China2009, pp.2940–2945. DOI: 10.1109/ICMA.2009.5246062.
20.
JennionsIAliF. (April2, 2021). “Assessment of Heat Exchanger Degradation in a Boeing 737-800 Environmental Control System.”ASME. J. Thermal Sci. Eng. Appl. December2021; 13(6): 061015. https://doi.org/10.1115/1.4050324
21.
LiuCSunJWangF, et al. Bayesian network method for fault diagnosis of civil aircraft environment control system. Proc IMechE, Part I: J Systems and Control Engineering2020; 234(5): 662–674.
22.
HareJGuptaSNajjarN, et al. System-level fault diagnosis with application to the environmental control system of an aircraft. SAE technical paper 2015-01-2583, 2015. DOI: 10.4271/2015-01-2583.
23.
Sadough VaniniZNMeskinNKhorasaniK.Multiple-model sensor and components fault diagnosis in gas turbine engines using autoassociative neural networks. J Eng Gas Turbine Power2014; 136(9): 091603.
24.
JolyRBOgajiSOSinghR, et al. Gas-turbine diagnostics using artificial neural-networks for a high bypass ratio military turbofan engine. Appl Energy2004; 78(4): 397–418.
25.
LeeYKMavrisDNVolovoiVV, et al. A fault diagnosis method for industrial gas turbines using Bayesian data analysis. J Eng Gas Turbine Power2010; 132(4): 1–6.
26.
SampathSSinghR.An integrated fault diagnostics model using genetic algorithm and neural networks. J Eng Gas Turbine Power2006; 128(1): 49–56.
27.
PalmerKAHaleWTHanL, et al. Built-in test design for fault detection and isolation in an aircraft environmental control system. IFAC-PapersOnLine2016; 49(7): 7–12.
28.
LinYZakwanSJennionsI.A Bayesian approach to fault identification in the presence of multi-component degradation. Int. J Progn Heal Manag2017; 8: 1–9
29.
KurzRBrunK.Degradation in gas turbine systems. J Eng Gas Turbine Power2001; 123(1): 70–77.
30.
GrafMBWongTSGreitzerEM, et al. Effects of non-axisymmetric tip clearance on axial compressor performance and stability. Proc. ASME Turbo Expo1998; 120(4): 648–661.
31.
IgieUPilidisPFoufliasD, et al. Industrial gas turbine performance: compressor fouling and on-line washing. J Turbomach2014; 136(10): 101001.
32.
ZwebekAIPilidisP.Degradation effects on combined cycle power plant performance – part III: gas and steam turbine component degradation effects. J Eng Gas Turbine Power2004; 126(2): 306–315.
33.
BoyleRJ.Prediction of surface roughness and incidence effects on turbine performance. J Turbomach1994; 116: 745–751.
34.
KurzRBrunKWollieM.Degradation effects on industrial gas turbines. J Eng Gas Turbine Power2009; 131(6): 062401 (7 pages). DOI: 10.1115/1.3097135.
35.
ShangLLiuG.Sensor and actuator fault detection and isolation for a high performance aircraft engine bleed air temperature control system. IEEE Trans Control Syst Technol2011; 19(5): 1260–1268.
36.
DaigleMJGoebelK.A model-based prognostics approach applied to pneumatic valves. Int J Progn Heal Manag2011; 2(2): 1–16.
37.
WrightSJDixon-HardyDWHeggsPJ.Aircraft air conditioning heat exchangers and atmospheric fouling. Therm Sci Eng Prog2018; 7: 184–202.
