Possible degradation of cable insulations exposed to radiation and heat is a safety and operational concern for nuclear power plants, particularly in the context of a license extension for the operation beyond original 40-year design life. Ethylene propylene rubber and silicone rubber are two major materials for the cable insulation. Degradation decreases the elongation at break of the insulation, which may lead to the exposure of the metal core in the cable, causing potential safety issues. This article proposes a mechanistic predictive model for the elongation at break as a function of time, temperature, and radiation dose rate. In the proposed model, the elongation at break curve is divided into an incubation section and a drop-off section with two parameters. In contrast to traditional deterministic approaches, this model projects the expected lifespan of cable insulation in the form of a probability distribution. The article also provides a validation of the model behavior using published experimental data.
YamamotoT. The interim report of the project of assessment of cable aging for nuclear power plants (JNES-SS-0619). Tokyo, Japan: Japan Nuclear Energy Safety Organization, 2006.
YamamotoTMinakawaT. The final report of the project of assessment of cable aging for nuclear power plants. Japan Nuclear Energy Safety Organization, Tokyo, Japan, JNES-SS-0903, 2009.
5.
SeguchiTTamuraKOhshimaT, et al. Degradation mechanisms of cable insulation materials during radiation–thermal ageing in radiation environment. Radiat Phys Chem2011; 80: 268–273.
6.
SeguchiTTamuraKKudohH, et al. Degradation of cable insulation material by accelerated thermal radiation combined ageing. IEEE Trans Dielectr Electr Insul2015; 22: 3197–3206.
7.
International Atomic Energy Agency. Assessing and managing cable ageing in nuclear power plants (NP-T-3.6). Vienna: International Atomic Energy Agency, Vienna International Centre, 2012.
8.
International Atomic Energy Agency. Assessment and management of ageing of major nuclear power plant components important to safety: in-containment instrumentation and control cables. Volume I (IAEA-TECDOC-1188). Vienna: International Atomic Energy Agency, 2000.
9.
HamptonNHartleinRLennartssonH, et al. Long-life XLPE insulated power cable. In: Proceedings of the Jicable 2007, Paris-Versailles, 24–28 June 2007. Jicable International Conference on Insulated Power Cables.
10.
SeguchiTHashimotoSArakawaK, et al. Radiation induced oxidative degradation of polymers—I: oxidation region in polymer films irradiated in oxygen under pressure. Radiat Phys Chem1981; 17: 195–201.
11.
International Atomic Energy Agency. Assessment and management of ageing of major nuclear power plant components important to safety: in-containment instrumentation and control cables. Volume II (IAEA-TECDOC-1188 2000). Vienna: International Atomic Energy Agency.
12.
PinelBBoutaudF. Life prediction of electrical cable equipment EPR insulating material. In: Proceedings of the international symposium on electrical insulation, Pittsburgh, PA, 5–8 June 1994, pp.395–397. New York: IEEE.
13.
PinelBBoutaudF. A methodology to predict the life duration of polymers used in nuclear power stations. Industrial needs and their approach. Nucl Instrum Methods Phys Res, Sect B1999; 151: 471–476.
14.
MoslehAApostolakisG. The assessment of probability distributions from expert opinions with an application to seismic fragility curves. Risk Anal1986; 6: 447–461.
15.
RabieiEChienHWhiteM, et al. Component reliability modeling through the use of Bayesian networks and applied physics-based models. In: Proceedings of the reliability and maintainability symposium, Reno, NV, 22–25 January 2018. New York: IEEE.
16.
RabieiEDroguettELModarresM. A prognostics approach based on the evolution of damage precursors using dynamic Bayesian networks. Adv Mech Eng2016; 8: 1–19.
17.
RabieiEDroguettELModarresM. Damage monitoring and prognostics in composites via dynamic Bayesian networks. In: Proceedings of the 2017 annual reliability and maintainability symposium, Orlando, FL, 23–26 January, pp.1–7. New York: IEEE.
18.
RabieiEDroguettELModarresM. Fully adaptive particle filtering algorithm for damage diagnosis and prognosis. Entropy2018; 20: 100.
19.
RabieiEDroguettELModarresM, et al. Damage precursor based structural health monitoring and damage prognosis framework. In: Proceedings of the safety and reliability of complex engineered systems, Zürich, 7–10 September 2015, pp.2441–2449. New York: CRC Press.
20.
DroguettELMoslehA. Bayesian methodology for model uncertainty using model performance data. Risk Anal2008; 28: 1457–1476.
21.
SzeSMLeeMK. Semiconductor devices physics and technology. New York: John Wiley & Sons, 2012.
22.
BlakemoreJS. Solid state physics. Cambridge: Cambridge University Press, 1985.
23.
DebyeP. Zur Theorie der spezifischen Wärmen. Ann Phys1912; 344: 789–839.
24.
EinsteinA. Die Plancksche Theorie der Strahlung und die Theorie der spezifischen Wärme. Ann Phys1907; 327: 180–190.
25.
TuK-N. 2011Electronic thin-film reliability. Cambridge: Cambridge University Press.
26.
ShimadaASugimotoMKudohH, et al. Degradation distribution in insulation materials of cables by accelerated thermal and radiation ageing. IEEE Trans Dielectr Electr Insul2013; 20: 2107–2116.
27.
CallisterWDRethwischDG. Materials science and engineering: an introduction. New York: John Wiley & Sons, 2007.
28.
EPRI and Toman G. Initial acceptance criteria concepts and data for assessing longevity of low-voltage cable insulations and jackets. Charlotte, NC: Electric Power Research Institute, 2005.
29.
StamatelatosMDezfuliH. Probabilistic risk assessment procedures guide for NASA managers and practitioners (SP-2011-3421). Washington, DC: NASA, 2011.
30.
NavidiW. Statistics for engineers and scientists. New York: McGraw-Hill, 2009.
31.
ŠaracTQuiévyNGusarovA, et al. The study of temperature and radiation induced degradation of cable polymers: a comparison between the mechanical properties of industrial and neat EPDM. Procedia Struct Integr2016; 2: 2405–2414.
32.
MakuuchiKChengS. Radiation processing of polymer materials and its industrial applications. Hoboken, NJ: John Wiley & Sons, 2012.
33.
LiuSFifieldLSBowlerN. Towards aging mechanisms of cross-linked polyethylene (XLPE) cable insulation materials in nuclear power plants. In: Proceedings of the conference on electrical insulation and dielectric phenomena, Toronto, ON, Canada, 16–19 October 2016, pp.935–938. New York: IEEE.
