Urban development is intensifying significantly in cities, mainly due to rapid population growth. However, this development is accompanied by increased vulnerability to climate change, leading to higher energy consumption. This energy demand is even more pronounced in hot climates, where temperatures are very high during the summer season. The Algerian Sahara is no exception, and is experiencing very accelerated development, which has given rise to the appearance of new urban districts, and different urban characteristics compared to the original core, which constitutes the urban form most adapted to the desert climate and in perfect harmony with the immediate environment. This study attempts to assess the effect of the different urban forms that make up the fabric of the city of Ouargla in south-east Algeria, taken as a case study, on the energy consumption of buildings in a hot climate. This research adopts a mixed approach to evaluate the energy consumption of three buildings located in three neighbourhoods with different urban characteristics. A quantitative estimate of the energy consumed for cooling during the summer season for the three typical buildings selected was simulated using DesignBuilder software, taking into account the city’s specific climatic data, as well as the urban characteristics of the three neighbourhoods selected for the study. As a result, this evaluation covers both the architectural and urban scales. For the qualitative assessment, a field survey was carried out using questionnaires to assess the quality of thermal comfort outside neighbourhoods and its impact on building interiors, and consequently on energy consumption. The results indicate the significant effect of urban form on energy consumption, confirming that the traditional form is the most appropriate to achieve better energy efficiency in a hot climate. Therefore, the research recommends taking into account various influential factors and applying design strategies, regarding urban form, from the first stage of the design process.
AbdallahASH (2015) The influence of urban geometry on thermal comfort and energy consumption in residential building of hot arid climate, Assiut, Egypt. Procedia Engineering121: 158–166.
2.
Ali-ToudertFMayerH (2006) Numerical study on the effects of aspect ratio and orientation of an urban street canyon on outdoor thermal comfort in hot and dry climate. Building and Environment41(2): 94–108.
3.
AllegriniJDorerVCarmelietJ (2016) Impact of radiation exchange between buildings in urban street canyons on space cooling demands of buildings. Energy and Buildings127: 1074–1084.
4.
AydinDMihlayanlarE (2020) A case study on the impact of building envelope on energy efficiency in high-rise residential buildings. Architecture, Civil Engineering, Environment13(1): 5–18.
5.
CarmelietaJKubilaybAFerrariaA, et al. (2020) The physics of the outdoor urban climate. 2nd International Conference on New Horizons in Green Civil Engineering. August 24–26, 2020, Victoria, British Columbia, Canada.
CoteM (ed.) (2005) La ville et le désert: le Bas-Sahara algérien. Algiers: Karthala Éditions.
8.
FutcherJAMillsG (2013) The role of urban form as an energy management parameter. Energy Policy53: 218–228.
9.
Ghorbani NaeiniHNorouziasasAPiraeiF, et al. (2023) Impact of building envelope parameters on occupants’ thermal comfort and energy use in courtyard houses. Architectural Engineering and Design Management: Epub ahead of print 2 September 2023. DOI: 10.1080/17452007.2023.2254294.
10.
GuesmiHSoussiMAbbassiF, et al. (2024) Energy efficiency of ecological buildings in Tunisia: Natural fiber composites and passive strategies impact. Journal of Building Physics48(11): 1–33.
11.
HachemCAthienitisAFazioP (2011a) Investigation of solar potential of housing units in different neighborhood designs. Energy and Buildings43(9): 2262–2273.
12.
HachemCAthienitisAFazioP (2011b) Parametric investigation of geometric form effects on solar potential of housing units. Solar Energy85(9): 1864–1877.
JalaliZShamseldinAYGhaffarianhoseiniA (2024. Urban microclimate impacts on residential building energy demand in Auckland, New Zealand: A climate change perspective. Urban Climate53: 101808.
15.
JamalBEl MoutaouakilLBoukendilM, et al. (2023) Numerical analysis of combined heat transfers through concrete hollow bricks in a hot climate of Morocco. Journal of Building Physics47(2): 230–246.
16.
JiangCZhouYLiK, et al. (2023) Impact of green roof and green facade on building thermal performance and carbon sequestration in subtropical climate of China. Journal of Building Physics46(5): 602–629.
17.
JohanssonE (2006) Influence of urban geometry on outdoor thermal comfort in a hot dry climate: A study in Fez, Morocco. Building and Environment41(10): 1326–1338.
18.
KazemiMRahifRCourardL, et al. (2023) Sensitivity analysis and weather condition effects on hygrothermal performance of green roof models characterized by recycled and artificial materials’ properties. Building and Environment237: 110327.
19.
KocagilIEOralGK (2015). The effect of building form and settlement texture on energy efficiency for hot dry climate zone in Turkey. Energy Procedia78: 1835–1840.
20.
KubilayAAllegriniJStrebelD, et al. (2020) Advancement in urban climate modelling at local scale: Urban heat island mitigation and building cooling demand. Atmosphere11(12): 1313.
21.
LiuKXuXZhangR, et al. (2023) Impact of urban form on building energy consumption and solar energy potential: A case study of residential blocks in Jianhu, China. Energy and Buildings280: 112727.
22.
MadandoustRBazkiyaeiZFZKazemiM (2018) Factor influencing point load tests on concrete. Asian Journal of Civil Engineering19: 937–947.
23.
MaileTBazjanacVFischerM (2012) A method to compare simulated and measured data to assess building energy performance. Building and Environment56: 241–251.
24.
ManganSDOralGKSozenI, et al. (2020) Evaluation of settlement textures in terms of building energy, economic performance, and outdoor thermal comfort. Sustainable Cities and Society56: 102110.
25.
ManganSDSozenIOralGK, et al. (2018) Effect of urban texture on building Energy Performance. In: 7th International Building Physics Conference, Syracuse, NY. pp.577–582. IBPC.
26.
ManioğluGYılmazZ (2008) Energy efficient design strategies in the hot dry area of Turkey. Building and Environment43(7): 1301–1309.
27.
MeirIARoafSC (2002) Thermal comfort–thermal mass: Housing in hot dry climates. Indoor Air2002: 1050–1055.
28.
MitchellG (2005) Urban development, form and energy use in buildings: A review for the solutions project. EPSRC SUE SOLUTIONS Consortium1(1): 1–28.
29.
MoeinMMSaradarARahmatiK, et al. (2023) Reliability analysis and experimental investigation of impact resistance of concrete reinforced with polyolefin fiber in different shapes, lengths, and doses. Journal of Building Engineering69: 106262.
30.
MoonenPDefraeyeTDorerV, et al. (2012) Urban physics: Effect of the micro-climate on comfort, health and energy demand. Frontiers of Architectural Research1(3): 197–228.
31.
MorgantiMSalvatiACochH, et al. (2017) Urban morphology indicators for solar energy analysis. Energy Procedia134: 807–814.
32.
MutaniGTodeschiV (2020) Building energy modeling at neighborhood scale. Energy Efficiency13(7): 1353–1386.
33.
NatanianJAleksandrowiczOAuerT (2019) A parametric approach to optimizing urban form, energy balance and environmental quality: The case of Mediterranean districts. Applied Energy254: 113637.
34.
NaultEPeronatoGReyE, et al. (2015) Review and critical analysis of early-design phase evaluation metrics for the solar potential of neighborhood designs. Building and Environment92: 679–691.
35.
OhMKimY (2019) Identifying urban geometric types as energy performance patterns. Energy for Sustainable Development48: 115–129.
36.
ONU-Habitat (2018) L’état des villes africaines 2018: La géographie de l’investissement africain. ONU-Habitat.
37.
RafiyanMFath JalaliADadashpoorH (2011) Evaluating the effect of building form and density on urban energy consumption (case study: Hashtgerd new town). Armanshahr Architecture & Urban Development4(6): 107–116.
38.
RattiCBakerNSteemersK (2005) Energy consumption and urban texture. Energy and Buildings37(7): 762–776.
39.
RodePKeimCRobazzaG, et al. (2014). Cities and energy: Urban morphology and residential heat-energy demand. Environment and Planning B: Planning and Design41(1): 138–162.
40.
Rodríguez-ÁlvarezJ (2016) Urban Energy Index for Buildings (UEIB): A new method to evaluate the effect of urban form on buildings’ energy demand. Landscape and Urban Planning148: 170–187.
41.
SalatS (2009) Energy loads, CO2 emissions and building stocks: Morphologies, typologies, energy systems and behaviour. Building Research & Information37(5–6): 598–609.
42.
SalvatiACochHMorgantiM (2017) Effects of urban compactness on the building energy performance in Mediterranean climate. Energy Procedia122: 499–504.
43.
SanaieianHTenpierikMVan Den LindenK, et al. (2014) Review of the impact of urban block form on thermal performance, solar access and ventilation. Renewable and Sustainable Energy Reviews38: 551–560.
44.
SolaACorcheroCSalomJ, et al. (2020) Multi-domain urban-scale energy modelling tools: A review. Sustainable Cities and Society54: 101872.
45.
SözenIOralGK (2019) Evaluation of parameters affecting energy efficiency of vernacular mardin houses: A case study. Megaron14(1): 1–10.
46.
SteemersK (2003) Cities, energy and comfort: A PLEA 2000 review. Energy and Buildings35(1): 1–2.
47.
Strømann-AndersenJSattrupPA (2011) The urban canyon and building energy use: Urban density versus daylight and passive solar gains. Energy and Buildings43(8): 2011–2020.
48.
Taher Tolou DelMSBayatSZojajiN (2022) The effect of building plan form on thermal comfort in the traditional residential patterns of the hot and dry climate of Qom. Heritage Science10(1): 185.
49.
TaleghaniMTenpierikMVan Den DobbelsteenA, et al. (2013) Energy use impact of and thermal comfort in different urban block types in the Netherlands. Energy and Buildings67: 166–175.
50.
VartholomaiosA (2017) A parametric sensitivity analysis of the influence of urban form on domestic energy consumption for heating and cooling in a Mediterranean city. Sustainable Cities and Society28: 135–145. Available at: https://www.meteonorm.com (accessd 5 2023).
51.
ZarghamiEJahanbakhshHTahanianA (2016) Investigate relationship between the form of residential buildings and energy consumption in hot and dry climates in Semnan City. Iranian Journal of Energy18(4): 63–76.
