The article examines air channels formed as simple geometrical figures along the slab length to determine their influence on thermal insulation value of the slab. The channel designer in the slab is intended to help lessen the weight of the slab, with simultaneous preservation of the actual thermal parameters. The solution is aimed at the rigid as insulation materials, and its objective is to design a prefabricate for renovation of the external walls.
KosseckaEKosnyJ (1996) Relations between structural and dynamic thermal characteristics of building walls. In: Proceedings of the 1996 international symposium of CIB W67: energy and mass flows in the life cycle of buildings. Available at: http://www.osti.gov/scitech/servlets/purl/392738
6.
LavineAIncroperaFDeWittD. (2007) Fundamentals of Heat and Mass Transfer. Hoboken, NJ: John Wiley & Sons.
7.
MichiejewMA (1953) Zasady wymiany ciepła. Warszawa: PWN.
8.
NizovtsevMIBelyiVTSterlygovAN (2014) The façade system with ventilated channels for thermal insulation of new constructed and renovated buildings. Energy and Buildings75: 60–69.
PogorzelskiJAFirkowicz-PogorzelskaK (2007) Thermal resistance of air spacer with surface coated by low emissivity film. Czasopismo Techniczne Wydawnictwo Politechniki Krakowskiejz 1-B: 117–123.
11.
ShuLSFioratoAEHowańskiJW (1979) Heat transmission coefficients of concrete block walls with core insulation. In: ASHRAE/DOE-ORNL conference, thermal performance of the exterior envelopes of buildings, Kissimmee, FL, 3–5 December, pp. 421–435.
12.
SomSL (2008) Introduction to Heat Transfer. New Delhi, India: Asoke K. Gosh, PHI Learning Private Limited.
13.
UrbanBEngelmannPKosseckaE. (2011) Arranging insulation for better thermal resistance in concrete and masonry wall systems. In: 9th Nordic symposium on building physics (NBS, 2011), Tampere, 29 May–2 June, vol. 3, pp. 967–977. Munich: Fraunhofer-Gesellschaft.
14.
Van GeemMG (1986) Thermal transmittance of concrete block walls with core insulation. Journal of Building Physics9(3): 187–210.
