The thermal performance of a modular lightweight steel framed wall was measured and calculated with three-dimensional finite element method model. The focus of this article is on the effect of flanking thermal losses. The calculated heat flux values varied from −22% (external surface) to +50% (internal surface) when flanking loss was set to 0 as a reference case, thermal transmittance equal to 0.30 W/(m2·K). Other critical parameters were the existence of fixing ‘L’-shaped steel elements and the perimeter thermal insulation (10 cm XPS).
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) (1993) Handbook of Fundamentals. Atlanta, GA: ASHRAE.
2.
ASTM C1046-95 (2007) Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components. West Conshohocken, PA: American Society for Testing and Materials.
3.
ASTM C1155-95 (2007) Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data. West Conshohocken, PA: American Society for Testing and Materials.
4.
ASTM C1363-11 (2011) Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus. West Conshohocken, PA: American Society for Testing and Materials.
5.
BombergMThorsellT (2008) Integrated methodology for evaluation of energy performance of the building enclosures – part 1: test program development. Journal of Building Physics32(1): 33–48.
6.
EN ISO 6946:2007 (2007) Building components and building elements – thermal resistance and thermal transmittance – calculation method.
7.
Erhorn-KluttingHErhornH (2009) ASIEPI – Impact of Thermal Bridges on the Energy Performance of Buildings. Stuttgart: Fraunhofer Institute for Building Physics.
8.
GervásioHSantosPSimões da SilvaL. (2010) Influence of thermal insulation on the energy balance for cold-formed buildings. International Journal of Advanced Steel Construction6(2): 742–766.
9.
GorgolewskiM (2007) Developing a simplified method of calculating U-values in light steel framing. Building and Environment42: 230–236.
10.
GOST 26602.1-99 (1999) Windows and doors. Methods of determination of resistance of thermal transmission. Interstate Standard of Russian Federation.
11.
ISO 10211:2007 (2007) Thermal bridges in building construction – heat flows and surface temperatures – detailed calculations.
12.
ISO 8990:1994 (1994) Thermal insulation – determination of steady-state thermal transmission properties – calibrated and guarded hot box.
13.
ISO 9869:1994 (1994) Thermal insulation – building elements – in-situ measurement of thermal resistance and thermal transmittance.
14.
KosnyJChristianJEBarbourE. (1994) Thermal performance of steel-framed walls. CRADA Final Report ORNL93-0235, 21 November. Oak Ridge, TN: Oak Ridge National Laboratory.
15.
MurtinhoVFerreiraHCorreiaA. (2010) Affordable houses: architectural concept of light steel residential house. In: ICSA2010 – International conference on structures and architecture, Guimarães, Portugal, 21–23 July 2010. London: Taylor & Francis Group, pp. 1291–1297, ISBN 978-0-415-49249-2.
16.
SantosPGervásioHSimões da SilvaL. (2011a) Influence of climate change on the energy efficiency of light-weight steel residential buildings. Civil Engineering and Environmental Systems28: 325–352.
17.
SantosPSimõesdaSilvaLUngureanuV (2012) Energy Efficiency of Light-Weight Steel-Framed Buildings. 1st ed.Lisbon: European Convention for Constructional Steelwork (ECCS), Technical Committee 14 – Sustainability & Eco-Efficiency of Steel Construction, ISBN 978-92-9147-105-8, N. 129.
18.
SantosPSimões da SilvaLGervásioH. (2011b) Parametric analysis of the thermal performance of light steel residential buildings in Csb climatic regions. Journal of Building Physics35(1): 7–53.
19.
ThorsellTBombergM (2008) Integrated methodology for evaluation of energy performance of building enclosures: part 2 – examples of application to residential walls. Journal of Building Physics32(1): 49–65.
20.
ThorsellTBombergM (2011) Integrated methodology for evaluation of energy performance of the building enclosures: part 3 – uncertainty in thermal measurements. Journal of Building Physics35(1): 83–96.
21.
ZalewskiLLassueSRousseD. (2010) Experimental and numerical characterization of thermal bridges in prefabricated building walls. Energy Conversion and Management51(12): 2869–2877.
