This study concerns the frost durability of an ordinary concrete without air-entraining agents. The water—cement ratio and the quantity of cement were chosen within the limitations imposed by the French standard. Physical and mechanical characteristics evolutions during freezing—thawing cycles have been followed. The obtained results show that the reduction in the mechanical resistance and the elastic modulus is accompanied by an increase in the intrinsic permeability. The damage is characterized by a scalar parameter, Df, due to frost action with which the resistance reduction as well as the permeability evolution may be described as a function of crack development.
The pore liquid phase pressure, generated during ice formation, was also calculated by an inverse poroelastic analysis based on strains recorded during freezing—thawing cycles. A negative pore pressure of 25 MPa at a temperature of -15° C resulting in an effective stress representing 25% of the compressive strength was found.
Afnor (2004a). Standard NF EN 206-1. France: L’Association française de Normalisation, AFNOR.
2.
Afnor (2004b). NF P18-424. France: L’Association française de Normalisation, AFNOR.
3.
Afnor (2004c). NF P18-425. France: L’Association française de Normalisation, AFNOR.
4.
Banthia N., Pigeon M. and Lachance L. ( 1989) Calorimetric study of freezable water in cement paste . Cement and Concrete Research19: 939-950.
5.
Baron J and Ollivier JP (eds) (1992) Durabilité des bétons . Paris: Chaussees, 453.
6.
Bary B. ( 1996) Etude de couplage hydraulique-mécanique dans le béton endommagé. LMT, C.N.R.S. de Cachan, Université de Paris 6, Publication No. 11, Cachan.
7.
Beaudoin JJ and MacInnis C. ( 1972) Dimensional changes of hydrated portland cement paste during slow cooling and warming. Cement and Concrete Research2: 225-240.
8.
Bejaoui S. ( 2001) Etude de la formation de la glace au sein de la texture poreuse des matériaux a base de liants hydrauliques. In: INSA, Toulouse.
9.
Biot MA ( 1941) General theory of three dimensional consolidation . Journal of Applied Physics12: 155-164.
10.
Boukpeti N. ( 2008) One-dimensional analysis of a poroelastic medium during freezing. International Journal for Numerical and Analytical Methods in Geomechanics32: 1661-1691.
11.
Coussy O. ( 2005) Poromechanics of freezing materials. Journal of the Mechanics and Physics of Solids53: 1689-1718.
12.
Coussy O. and Monteiro PJM ( 2008) Poroelastic model for concrete exposed to freezing temperatures . Cement and Concrete Research38: 40-48.
13.
Coussy O., Dangla P., Lassabatere T. and Baroghel-Bouny V. ( 2004) The equivalent pore pressure and the swelling and shrinkage of cement-based materials. Materials and Structures37: 15-20.
14.
Diaw M., Perrin B. and Monlouis-Bonnaire J. ( 2002) Limit of validity of the moisture diffusivity for the study of moisture transfer inside terracotta. Materials and Structures35: 42-49.
15.
Fabbri A., Fen-Chong T. and Coussy O. ( 2006) Dielectric capacity, liquid water content, and pore structure of thawing-freezing materials. Cold Regions Science and Technology44: 52-66.
16.
Fagerlund G. ( 1973) Determination of pore size distribution by suction porosimetry . Materials and Structures6: 191-201.
17.
Johannesson B.(2010) Dimensional and ice content changes of hardened concrete at different freezing and thawing temperatures. Cement and Concrete Composites32: 73-83.
18.
Kjeldsen A. and Geiker M. ( 2008) On the interpretation of low temperature calorimetry data . Materials and Structures41: 213-224.
19.
Klinkenberg LJ ( 1941) The permeability of porous media to liquids and gases . American Petroleum Institute, Drilling and Production Practice, 200-213.
20.
Lee J. and Fenves GL ( 1998) Plastic-damage model for cyclic loading of concrete structures . Journal of Engineering Mechanics124: 892-900.
21.
Matala S. ( 1995) Effects of Carbonation on the Pore Structure of Granulated Blast Furnace Slag Concrete. Espoo, Finland: Helsinki University of Technology: Faculty of the Civil Engineering and Surveying Concrete Technology.
22.
Mazars J. and Pijaudier-Cabot G. ( 1989) Continuum damage theory-application to concrete . Journal of Engineering Mechanics115: 345-365.
23.
Monlouis-Bonnaire JP, Verdier J. and Perrin B. ( 2004) Prediction of the relative permeability to gas flow of cement-based materials. Cement and Concrete Research34: 737-744.
24.
Neaupane KM, Yamabe T. and Yoshinaka R. ( 1999) Simulation of a fully coupled thermo-hydro-mechanical system in freezing and thawing rock. International Journal of Rock Mechanics and Mining Sciences36: 565-580.
25.
Penttala V. ( 1998) Freezing-induced strains and pressures in wet porous materials and especially in concrete mortars. Advanced Cement Based Materials7: 8-19.
26.
Penttala V. and Al-Neshawy F. ( 2002) Stress and strain state of concrete during freezing and thawing cycles. Cement and Concrete Research32: 1407-1420.
27.
Picandet V., Khelidj A. and Bastian G. ( 2001) Effect of axial compressive damage on gas permeability of ordinary and high-performance concrete. Cement and Concrete Research31: 1525-1532.
28.
Pigeon M. and Pleau R. ( 1995) Durability of Concrete in Cold Climates. Modern Concrete Technology Series. Vol. 4. E&FN, Spon, London, UK: Chapman & Hill, 244.
29.
Powers T. ( 1949) The air requirement of frost-resistant concrete , In: Proceedings, Highway Research Board, PCA Bulletin33, Vol. 29, 184-211.
30.
Powers T. and Helmuth RA ( 1953) Theory of volume changes in hardened Portland cement paste during freezing. In: Proceedings, Highway Research Board, Bulletin no. 33, Portland Cement Association, Vol. 32, 286-297.
Scherer GW ( 1999) Crystallization in pores. Cement and Concrete Research29: 1347-1358.
33.
Schwartzentruber A. and Catherine C. ( 2000) Method of the concrete equivalent mortar (CEM) - A new tool to design concrete containing admixture. Materials and Structures33: 475-482.
34.
Sellevold EJ and Bager DH ( 1981) Low temperature calorimetry as a pore structure probe . In: 7th International Congress on the Chemistry of Cement, Paris.
35.
Selvadurai APS, Hu J. and Konuk I. ( 1999) Computational modelling of frost heave induced soil-pipeline interaction: I. Modelling of frost heave. Cold Regions Science and Technology29: 215-228.
36.
Setzer JM ( 2001a) Micro-Ice-Lens Formation in Porous Solid. Journal of Colloid and Interface Science243: 193-201.
37.
Setzer JM ( 2001b) Mechanical stability criterion, triple-phase condition, and pressure differences of matter condensed in a porous matrix. Journal of Colloid and Interface Science235: 170-182.
38.
Setzer JM, Auberg R., Kasparek S., et al. (2001) CIF-Test - Capillary suction, internal damage and freeze thaw test. Materials and Structures34: 515-525.
39.
Shoop SA and Bigl SR ( 1997) Moisture migration during freeze and thaw of unsaturated soils: modeling and large scale experiments. Cold Regions Science and Technology25: 33-45.
40.
Van-Genuchten MT ( 1980) A closed-form equation for predicting the hydraulic conductivity of unsaturated soils. Soil Science Society American Journal44: 892-898.
41.
Wardeh G. and Perrin B. ( 2006a) Analysis of strains in baked clay based materials during freezing and thawing cycles. Journal of Building Physics29: 201-217.
42.
Wardeh G. and Perrin B. ( 2006b) Relative permeabilities of cement-based materials: influence of the tortuosity function. Journal of Building Physics30: 39-57.
43.
Wardeh G. and Perrin B. ( 2008a) Freezing-thawing phenomena in fired clay materials and consequences on their durability. Construction and Building Materials22: 820-828.
44.
Wardeh G. and Perrin B. ( 2008b) Numerical modelling of the behaviour of consolidated porous media exposed to frost action. Construction and Building Materials22: 600-608.
45.
Woodbury KA ( 2002) Inverse Engineering Handbook. Handbook Series for Mechanical Engineering. Boca Raton : CRC Press Inc., 480.
46.
Zhou Z-Y. and Mihashi H. ( 2008) Micromechanics model to describe strain behavior of concrete in freezing process. Journal of Materials in Civil Engineering20: 46-53.
47.
Zuber B. and Marchand J. ( 2004) Predicting the volume instability of hydrated cement systems upon freezing using poro-mechanics and local phase equilibria. Materials and Structures37: 257-270.
48.
Zuber B., Marchand J., Delagrave A. and Bournazel JP ( 2000) Ice formation mechanisms in normal and high-performance concrete mixture. ASCEJ Material and Civil Engineering12: 16-23.
