Studies on the effect of multi-walled carbon nanotube–reinforced polymer-based nano-composites using finite element analysis software tool

Abstract

This article confirms experimental results by finite element analysis. The study includes meshing the specimen of size 40 × 12 × 6 mm³. The model is constructed in DesignModeler (ANSYS Workbench). Multi-walled carbon nanotubes are aligned in different angles to correlate the experimental results. The modelling method employed for analysis is based on weight ratio. The proportion of multi-walled carbon nanotubes is 0.25%, 0.5%, 0.75% and 1% by weight of polymer matrix (epoxy resin) for different specimens. Multi-walled carbon nanotubes are dispersed in epoxy matrix using ultrasonic energy. Composite beams were tested under flexure in order to evaluate their mechanical property such as load–deflection criteria by three-point bending test. Finite element method results were in close agreement with the experimental outcomes with different orientation of multi-walled carbon nanotubes into the matrix considered.

Keywords

Multi-walled carbon nanotubes epoxy resin directional orientation interfacial adhesion finite element analysis flexural strength test

Get full access to this article

View all access options for this article.

References

Tomanek

Enbody

. Fundamental materials research, New York: Kluwer Academic/Plenum Publishers, 2000.

Tersoff

Ruoff

. Structural properties of carbon nanotubes crystal. Phy Rev Lett 1994; 73: 676–679.

Ruoff

Qian

Liu

WK.

Mechanical properties of carbon nanotubes: theoretical predictions and experimental measurements. Compt Rendus Phys 2003; 4(9): 993–1008.

Treacy

MMJ

Ebbesen

Gibson

. Exceptionally high Young’s modulus observed for individual carbon nanotubes. Nature 1996; 381: 678–680.

Halicioglu. International Applied Mechanics, June 2011, Volume 47 issue 1, pp. 2–44.

Harris

PJF

. Carbon nanotubes and related structures: new materials for twenty first century. New York: Cambridge University Press, 1999.

Govindjee

Sackman

. On the use of continuum mechanics to estimate the properties of nanotube. Solid State Commun 1999; 110(4): 227–230.

Yoon

CQ.

Flow induced flutter instability of cantilever carbon nanotubes. Int J Solids Struct 2006; 43(11–12): 3337–3349.

Chakraborty

Spectral element based model for wave propagation analysis in multiwall carbon nano tubes, 2006; 43(2).

10.

Wang

Murthy

Chae

. Small-angle X-ray scattering investigation of carbon nanotube reinforced polyacrylonitrile fibers during deformation. J Polym Sci Pol Phys 2009; 47: 2394–2409.

11.

Yoon

Mioduchowski

Vibration buckling and impact of carbon nanotubes. Compos Sci Tech 2005; 65(9): 1326–1336.

12.

Yakobson

Brabec

Bernholc

. Nanomechanics of carbon tubes: instabilities beyond the linear response. Phys Rev Lett 1996; 76(14): 2511–2514.

13.

. Elastic buckling of single-walled carbon nanotube ropes under high pressure. Phys Rev B Condens Matter 2000; 62: 10405–10408.

14.

Doyle

. Wave propagation in structures. New York: Springer, 1997.

15.

Lancaster

. Theory of matrices. New York and London: Academic Press, 1969.

16.

Chakraborty

Shell element based model for wave propagation analysis in multi-wall carbon nanotubes. Int J Solids Struct 2006; 44(5): 1628–1642.

17.

Chakraborty

Gopalakrishnan

. A spectrally formulated plate element for wave propagation analysis in anisotropic material. Comput Method Appl M 2005; 194(42–44): 4425–4446.

18.

Wang

Zhang

. Buckling of double-walled carbon nanotubes modeled by solid shell elements. J Appl Phys 2006; 99(11): 114317.

19.

Hallad . Experimental investigation of Multi walled carbon nano tubes in polymer based matrix for structural applications. Universal Journal of Structural analysis (2014): 71–77.