A low-temperature glass-to-glass bonding process is demonstrated that creates uniform channels with a channel depth of 80 nm. The bond strength was characterized as a function of temperature and glass surface treatment. A significant increase in bond strength was found by rinsing the two glass surfaces with a calcium (II) acetate hydrate solution prior to bonding.
FairR. B.KhlystovA.TailorT. D.IvanovV.EvansR. D.GriffinP. B.VijayS.PamulaV. K.PollackM. G.ZhouJ.Chemical and biological applications of digital-microfluidic devices. IEEE Des. Test Comput., 2007, 24, 10–24.
2.
HaeberleS.ZengerleR.Microfluidic platforms for lab-on-a-chip applications. Lab on a Chip, 2007, 7, 1094–110.
3.
OhnoK. I.TachikawaK.ManzA.Microfluidics: applications for analytical purposes in chemistry and biochemistry. Electrophoresis, 2008, 29, 4443–4453.
4.
McNamaraS.GianchandaniY. B.On-chip vacuum generated by a Micromachined Knudsen Pump. IEEE J. MEMS, 2005, 14, 741–746.
5.
PerssonL. H.ThamdrupL. H.MikkelsenM. B. L.JaarlgardS. E.Skafte-PedersenP.BruusH.KristensenA.Double thermal oxidation scheme for the fabrication of SiO2 nanochannels. Nanotechnology, 2007, 18, 245301.
WeiJ.NaiS. M. L.WongC. K. S.SunZ.LeeL.C.Low temperature glass-to-glass wafer bonding. IEEE Trans. Advd Packaging, 2003, 26, 289–94.
8.
QiangC.GangL.Qing-HuiJ.Jian-LongZ.Qiu-ShiR.Yuan-SenX.A rapid and low-cost procedure for fabrication of glass microfluidic devices. J. Microelectromech. Systems, 2007, 16, 1193–200.
9.
AllenP. B.ChiuD. T.Calcium-assisted glass-to-glass bonding for fabrication of glass microfluidic devices. Analyt. Chem., 2008, 80, 7153–7157.
10.
YamarthyC.PharasK.SchultzA.McNamaraS.Pneumatic pumping of liquids using thermal transpiration for lab-on-a-chip applications. In Proceedings of the International IEEE Sensors Conference, New Zealand, 2009, pp. 1931–1934.
