Abstract
Wei Dou, Xiaocong He, and Biao Tang. Stability analysis of machine tool spindle under uncertainty. Advances in Mechanical Engineering 2016; 8(5): 1-11. DOI: 10.1177/1687814016646265
The Advances in Mechanical Engineering Editorial Office became aware that the peer review process organised by the Guest Editors of the Special Collection
Based on the feedback from the new independent referees, the following corrections are to be made to the above-referenced article.
The authors did not properly acknowledge similar findings in the existing literature, including the following key references:
Xiaoming Zhang, Limin Zhu, Dong Zhang, Han Ding, Youlun Xiong (2012). Numerical robust optimization of spindle speed for milling process with uncertainties. International Journal of Machine Tools and Manufacture, 61, pp. 9-19.
(Original DOI: https://doi.org/10.1016/j.ijmachtools.2012.05.002)
Giovanni Totis (2009). RCPM—A new method for robust chatter prediction in milling. International Journal of Machine Tools and Manufacture, 49(3-4), pp. 273-284.
(Original DOI: https://doi.org/10.1016/j.ijmachtools.2008.10.008)
Paolo Albertelli, Nicola Cau, Giacomo Bianchi, Michele Monno (2012). The effects of dynamic interaction between machine tool subsystems on cutting process stability. The International Journal of Advanced Manufacturing Technology, 58(9-12), pp. 923-932.
(Original DOI: https://doi.org/10.1007/s00170-011-3465-5)
Petr Kolar, Matej Sulitka, Miroslav Janota (2011). Simulation of dynamic properties of a spindle and tool system coupled with a machine tool frame. The International Journal of Advanced Manufacturing Technology, 54(1-4), pp. 11-20.
(Original DOI: https://doi.org/10.1007/s00170-010-2917-7)