Evaluation of the differences in pressure applied to the vessel wall by different types of balloon remodeling microcatheters in an experimental model

Abstract

Background

We examined compliance differences among balloon remodeling microcatheters, which have not been established previously.

Methods

Straight and 120° angulated vascular models were created in a 3 mm diameter tube with 3 mm hole (vascular model A), a tube with a 4 mm hole (vascular model B), and a 4 mm diameter tube (vascular model C). We compared the pressure exerted when each balloon was herniated 1 or 2 mm between three compliant balloons (SHOURYU SR, TransForm C, and Scepter C) and four super-compliant balloons (HyperForm, SHOURYU HR, TransForm SC, and Scepter XC).

Results

In vascular model A, there was a significant difference in the pressure exerted by compliant balloons and super-compliant balloons in both the straight and angulated models. In the straight model (1 and 2 mm), the lowest pressure was exerted by HyperForm (super-compliant balloons group) and SHOURYU SR (compliant balloons group). The lowest pressure was exerted in the angulated model by HyperForm (super-compliant balloons group) and Scepter C (compliant balloons group). The Scepter balloon exerted higher pressure in the straight model than other balloon remodeling microcatheters but less in the angulated model. In vascular model B, the pressure decreased in all balloons compared with model A. In vascular model C, the pressure increased in all balloons compared with model A.

Conclusions

Pressure differed across balloon remodeling microcatheters. In addition, vessel shape and diameter, and hole size, affected the results. Our findings can help select balloon remodeling microcatheters.