Experimental dynamic tests for energy absorption by four selected auxetic fabrics were conducted and analyzed. An original test stand was designed, manufactured and attached to a Hopkinson's bar. The energy absorbed by an auxetic curtain was expressed in terms of the energy of the maximum elastic deformation of a unit volume along the support line of the witness-plate. A quasi-impulse load was induced using a gas blast under a pressure corresponding to an indoors deflagration explosion of a propane-air mixture in a vented room. The auxetic fabric with the best energy-absorption properties was identified on the basis of the comparative analysis using a reference system with a steel specimen.
WrightJ. R., EvansK. E., BurnsM. K., Auxetic blast protection textiles – Crime feasibility study, Final Report – EP/D036690/1, University of Exeter, United Kingdom2007.
2.
WrightJ. R., SloanM. R., EvansK. E., Tensile properties of helical auxetic structures: A numerical study, Journal of Applied Physics, Vol. 108, 2010, Paper No. 044905.
3.
UgbolueS. C., The formation and performance of auxetic textiles. Part I: Theoretical and technical considerations, The Journal of the Textile Institute, Vol. 101, Iss. 7, 2010, pp. 660–667.
4.
UgbolueS. C., The formation and performance of auxetic textiles. Part II: geometry and structural properties, The Journal of the Textile Institute, Vol. 102, Iss. 5, 2011, pp. 424–433.
5.
HanY., ChenL., Mechanical model of domestic gas explosion load, Transactions of Tianjin University, Vol. 14, Iss. 6, 2008, pp. 434–440.
6.
WangY., LianZ., ZhangQ., Effect of ignition location and vent on hazards of indoor liquefied petroleum gas explosion, Combustion Science and Technology, 2016, DOI: 10.1080/00102202. 2016.1246442.
7.
ZhangQ., PangL., ZhangS. X., Effect of scale on flame speeds of methane–air, Journal of Loss Prevention in the Process Industries, Vol. 24, Iss. 5, 2011, pp. 705–712.
8.
BauwensC. R., ChaffeeJ., DorofeevS., Effect of ignition location, vent size, and obstacles on vented explosion overpressures in propane-air mixtures, Combustion Science and Technology, Vol. 182, 2010, pp. 1915–1932.
