In the present work, a generic experimental investigation procedure was developed on mechanical characterization and testing of carbon fabric/epoxy material under uniaxial tensile loading condition. In this study, using IR Thermographic NDT, the defects are identified by measuring changes in temperature online during testing and by taking temperature contour images on the surface of the composite samples. The unidirectional elastic properties such as tensile modulus, in-plane shear modulus, Poisson's ratio, and strength parameter like ultimate tensile strength, shear strength are reported. The estimated mechanical properties of carbon fabric/ epoxy composite were statistically analysed in this work using the Weibull distribution. In addition, emphasis on the microstructural investigation using Scanning Electron Microscope (SEM) is given, in order to study the fracture mechanism of the carbon fabric/epoxy composite under uniaxial tensile loading. The failure surfaces of the tensile tested carbon fabric/epoxy specimens were examined by SEM and the detailed fracture process such as matrix cracking, fiber pull outs and delamination are observed and discussed.
TarpaniJose Ricardo; MilanMarcelo Tadeu; SpinelliDirceu; BoseWaldek Wladimir.; “Mechanical performance of carbon-epoxy laminates Part I: quasi-static and impact bending properties”, Materials Research, 2006, 9(2), pp. 115–120.
2.
MatsuiJunichi.; “Polymer Matrix Composites (PMC) in aerospace”, Advanced Composite Materials, 1995, 4(3), pp. 197–208.
3.
DanielIsaac M.; Engineering Mechanics of Composite Materials (2nd ed.), Oxford University Press, New York, 2007.
4.
ThatteBhushan S.; “Studies on Behavior of Carbon and Fiberglass Epoxy Composite Laminates under Low velocity Impact Loading using LS-DYNA®”, In the Proceedings of 10th International LS-DYNA® Users Conference, Dearborn, Michigan, 2008, 9, pp. 43–54.
5.
NaikN. K.; GaneshV. K.; “On-Axis in plane shear strength of plain weave fabric composites”, In the Proceedings of National Conference on Composites: Science & Technology, IIT Bombay, 1992, pp. 134–140.
6.
MallickP. K.; Fiber-Reinforced Composites Materials, Manufacturing and Design, CRC Press, Taylor & Francis Group, New York, 2010.
7.
CavallaroPaul V; SadeghAli M; QuigleyClaudia J.; “Contributions of Strain Energy and PV-work on the Bending Behavior of Uncoated Plain-woven Fabric Air Beams”, Journal of Engineered Fibers and Fabrics, 2007, 2(1), pp. 16–30.
8.
ShinSeunghan; JangJyongsik.; “The effect of thermoplastic coating on the mechanical properties of woven fabric carbon/epoxy composites”, Journal of materials science, 2000, 35, pp. 2047–2054.
9.
ImmarigeonJ. P.; HoltR. T.; “Lightweight materials for aircraft applications”, Materials Characterization, 1995, 35(1), pp. 41–67.
10.
MurphyJohn.; The Reinforced Plastics Handbook, 2nd ed, ELSEVIER Advanced Technology, New York, 1998.
11.
MitraP.; “Advanced Polymer Composites with special reference to Carbon Fibre Reinforced Polymer (CFRP)”, In the Proceedings of National Conference on Composites: Science & Technology, IIT Bombay, 1992, pp. 31–48.
KrapezJ. C.; SpagnoloL.; FriebM.; “Measurement of in-plane diffusivity in non-homogeneous slabs by applying flash thermography”, International Journal of Thermal Sciences, 2004, 43, pp. 967–977.
15.
HodgkinsonJ. M.; Mechanical Testing of Advanced Fibre Composites, CRC Press, USA, 2000.
16.
ASTM D3039M.; “Standard Test Method for Tensile properties of Polymer Composite Materials”, American Society for Testing and Materials, 1997, Vol 15.03, 100 Barr Harbor Drive, West Conshohocken, PA 19428, USA.
17.
IshaiO.; LavengoodR. E.; “Characterizing Strength of Unidirectional Composites”, Composites Materials: Testing and Design, ASTM STP 460, American Society for Testing and Materials, PA, West Conshohocken, 1970, pp. 271–281.
18.
ASTM D6856–03, Standard Guide for Testing Fabric-Reinforced Textile Composite Materials, 2003.
19.
HamedA. F.; HamdanM. M.; “Experimental Characterization of Filament Wound Glass/Epoxy and Carbon/Epoxy Composite Materials”, ARPN Journal of Engineering and Applied Sciences, 2008, 3(4), pp. 76–87.
DhamiT. L.; “Development and Characterization of Carbon Fibre reinforced Glass Ceramic Composites”, In Proceedings of National Conference on Composites: Science & Technology, IIT Bombay, 1992, pp. 73–93.
22.
SundqvistB.; “The thermal properties of an epoxy resin at high pressure and temperature”, Journal of Physics D: Applied Physics, 1977, 10(10), pp. 1397.
23.
MazumdarSanjay K.; Composites Manufacturing-Materials, Product and Process Engineering, CRC Press, Florida, 2010.
24.
BarberoE.; Fernández-SáezJ.; NavarroC.; “Statistical analysis of the mechanical properties of composite materials”, Composites: Part B: Engineering, 2000, 31, 375–381.
25.
Husnu DirikoluM.; AktasAlaattin.; “Statistical Analysis of Fracture Strength of Composite Materials using Weibull Distribution”, Turkish Journal of Engineering & Environmental Sciences, 2002, 26, 45–48.
26.
SatoNorio.; “In situ SEM observation of fracture process of carbon-fibre-reinforced epoxy resin composite”, Journal of Materials Science Letters, 1985, 4, pp. 1095–1098.
27.
RazvanA, BakisC. E.; “SEM investigation of fiber fracture in composite laminates”, Materials Characterization, 1990, 24(2), pp. 179–190.
28.
ShikhmanterL.; EldrorI.; CinaB.; “Fractography of Unidiretional CFRP Composites”, Journal of Materials Science, 1989, 24, pp. 167–172.
29.
ManjunathaC. M.; TaylorA. C.; KinlochA. J.; “The Tensile fatigue behaviour of a GFRP composite with rubber particle modified epoxy matrix”, Journal of Reinforced Plastics and Composites, 2010, 29(14), pp. 2170–2182.
