Modeling of Yarn Strength Utilization in Cotton Woven Fabrics using Multiple Linear Regression

Pierce F.T. (1937), “The Geometry of Cloth Structure”, Journal of the Textile Institute, Vol. 28, No. 3, T45–T96.

Womersley D.R. D.I.C. (1937), “The Application of Differential Geometry to the Study of the Deformation of Cloth under Stress”, Journal of the Textile Institute, Vol. 28, No. 3, T99–T113.

Olofsson B. (1964), “A General Model of a Fabric as a Geometric Mechanical Structure”, Journal of the Textile Institute, Vol. 55, No. 11, T541–T557.

Olofsson B. (1967), “A Study of Inelastic Deformations of Textile Fabrics”, Journal of the Textile Institute, Vol. 58, No. 6, T221–T241.

Kawabata S , Niwa M. , and Kawai H. (1973), “The finite-deformation theory of plain weaves Part I-The Biaxial-deformation theory”, Journal of Textile Institute, 64(2), 21–46.

Kawabata S , Niwa M , and Kawai H. (1973), “The finite-deformation theory of plain weaves Part II-The Uniaxial-deformation theory”, Journal of Textile Institute, 64(2), 47–61.

Sagar T.V. , Potluri P. , Hearle J.W.S. (2003), “Mesoscale modelling of interlaced fibre assemblies using energy method”, Computational Materials Science, 28, 49–62.

Zeydan M. (2009), “Prediction of Fabric Tensile Strength by Modeling the Woven Fabric”, Chapter 8, Book Edited by Dobnik Dubrovski P, “Woven Fabric Engineering“, Published by Sciyo, Janeza Trdine 9, 51000 Rijeka, Croatia.

Shahpurwala A.A. , and Schwartz P. (1989), “Modeling Woven Fabric Tensile Strength Using Statistical Bundle Theory”, Textile Research Journal, (59), 26–32.

Ning P. (1996), “Analysis of Woven Fabric Strengths: Prediction of Fabric Strengths under Uniaxial and Biaxial Extensions”, Composite Science & Technology, 56, 311–327.

King M.J. , Jearanaisilawong P. , and Socrate S. (2005), “A continuum constitutive model for the mechanical behavior of woven fabrics”, International Journal of Solids and Structures, 42, 3867–3896.

Malik Z.A. , Malik M.H. , Hissain T. , and Arain F.A. (2011), “Development of Models to Predict tensile Strength of Cotton Woven Fabrics”, Journal of Engineered Fibers & Fabrics, Vol. 6, Issue 4, 46–53.

Peng X.Q. , and Cao J. (2005), “A continuum mechanics-based non-orthogonal model for woven composite fabrics”, Composites: Part A, 36, 859–874.

Lomov S.V. , Gusakov A.V. , Huysmansa G. , Prodromoua A. , Verpoest I. , “Textile geometry preprocessor for meso-mechanical models of woven composites”, Composites Science and Technology 60 (2000) 2083–2095.

Barbero E.J. , Trovillion J. , Mayugo J.A. , and Sikkil K.K. (2006), “Finite Element Modelling of Plain Weave Fabrics from Photomicrograph Measurements”, Composite Structures, Vol. 17, No. 1, May, 41–52.

Majumdar A. , Anindya Ghosh , Saha S.S. , Roy A. , Barman S. , Panigrahi D. , and Biswas A. (2008), “Empirical Modelling of Tensile Strength of Woven Fabrics”, Fibers and Polymers, Vol. 9, No. 2, 240–245.

Malik Z.A. , Malik M.H. , Hissain T. , and Arain F.A. (2011), “Development of Models to Predict tensile Strength of Cotton Woven Fabrics”, Journal of Engineered Fibers & Fabrics, Vol. 6, Issue 4, 46–53.

Becker S. (1948), “The Relationship between the Structural Geometry of a Textile Fabric and Its Physical Properties: I: Literature Review, Textile Research Journal, (18), 650–658.

Kovar R. (2009), “Anisotropy in Woven Fabric Stress and Elongation at Break” Chapter 1, Book Edited by Dobnik Dubrovski P, “Woven Fabric Engineering“, Published by Sciyo, Janeza Trdine 9, 51000 Rijeka, Croatia.

Kawabata S. (1980), “The Standardization and Analysis of Hand Evaluation”, 2nd Edition The Textile Machinery Society of Japan.

Grosberg P. (1969), “The Geometrical Properties of Plain Cloths”, Chapter 9, Structural Mechanics of Fibers, Yarns and Fabrics, Volume 1 by Hearle J.W.S., Grosberg P. and Backer S., Published by Wiley Interscience, New York.