Abstract
Electrospinning has been used to produce micrometer size fibers, both solid and hollow from non-covalently associating small molecules of a low grade hydrocarbon reject of crude oil, asphaltene. Asphaltene defined as a solubility class of crude oil is by no means a polymer but relatively large organic molecule of molecular weight ranging from 500 to 1000 Dalton. The production of asphaltene fibers is feasible by electrospinning because of its unique molecular structure which allows molecular aggregation. Fibers with diameter ranging from 2–20 μm were successfully spun from an asphaltene in toluene solution. Adding 2% hydrogen peroxide enhances electrospinning, leading to formation of hollow fibers, whereas adding 2% water inhibits electrospinning. The structure and morphology of the electrospun fibers were investigated with optical microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy and time-of-flight secondary ion mass spectroscopy. The electrospun asphaltene fibers offer the potential for direct fabrication of membranes without use of multiple synthetic steps, complex electrospinning designs, or post processing surface treatments.