Abstract
Radiation heat transfer is found to be the dominant mode of heat transfer at temperatures higher than 400–500K [11]. Convection heat transfer being negligible in nonwovens, effective thermal conductivity is given by the sum of its conduction and radiation components. In this research two methods were identified to determine radiative thermal conductivity of needlepunched samples made from Nomex fibers. The first method involved the determination of radiative thermal conductivity using effective (total) thermal conductivity determined using a Guarded Hot Plate (GHP) instrument. In the second method radiative thermal conductivity was estimated using the extinction coefficient of samples. The extinction coefficient was determined by using direct transmission measurements made using a Fourier Transform InfraRed (FTIR) spectrometer. Results confirmed that radiation was the dominant mode of heat transfer at temperatures higher than 535 K. The conduction component of effective thermal conductivity did not change much in the range of densities tested. Empirical models for predicting the temperature difference across thickness of the fabric and the radiative thermal conductivity with R-square values of 0.94 and 0.88 respectively showed that fabric density, fabric thickness, fiber fineness, fiber length, mean pore size and applied temperature were found to have significant effect on the effective thermal conductivity and its radiation component. Though a high correlation between the results of Method 1 (Guarded Hot Plate) and Method 2 (FTIR) was not seen, the absorbance measurements made using the FTIR spectrometer were found to have significant effect on the radiative thermal conductivity.