On-line measurements during melt blowing combined with off-line web analysis are presented to fundamentally describe the commercial melt blowing process.
References
1.
YinH., YanZ., and BreseeR.R.“Experimental Study of the Melt Blowing Process,”International Nonwovens Journal, 8(1), 60–65 (1999)
2.
UyttendaeleM.A.J., and ShambaughR.L.“Melt Blowing: General Equation Development and Experimental Verification,”AIChE Journal, 36(2), 175–185 (1990)
3.
RaoR.S., and ShambaughR.L.“Vibration and Stability in the Melt Blowing Process,”Ind. Eng. Chem. Res, 32(12), 3100–3111 (1993)
4.
BansalV., and ShambaughR.L.“On-Line Determination of Diameter and Temperature During Melt Blowing of Polypropylene,”Ind. Eng. Chem. Res, 37(5), 1799–1806 (1998)
5.
WuT.T., and ShambaughR.L.“Characterization of the Melt Blowing Process with Laser Doppler Velocimetry,”Ind. Eng. Chem. Res, 31(1), 379–389 (1992)
6.
BansalV., and ShambaughR.L.On-Line Determination of Density and Crystallinity During Melt Spinning,”Polymer Engineering and Science, 36(22), 2785–2798 (1996)
