Abstract
Objective
Bilateral internal thoracic artery (BITA) bypass can enable more complete arterial revascularization procedures. Minimally invasive cardiac surgery (MICS) can offer significant patient benefits. New minimally invasive technology for sternal retraction and tissue manipulation is needed to enable ergonomic and reliable minimally invasive ITA harvesting. The goal of this research was to develop technology and techniques, along with experimental testing and training models, for a sternal-sparing approach to in situ BITA harvesting through a small subxiphoid access site.
Methods
This study focused on optimizing custom equipment and methods for subxiphoid BITA harvesting initially in a porcine model (19 pig carcasses, 36 ITAs) and subsequently in 7 cadavers (14 ITAs).
Results
Fifty consecutive ITAs were successfully harvested using this remote access approach. The last 20 ITA specimens harvested from the porcine model were explanted and measured; the average length of the free ITA grafts was 12.8 ± 0.9 cm (range 10.8 to 14.2 cm) with a mean time of 23.3 ± 5.2 minutes (range 13 to 25 minutes) for each harvest.
Conclusions
Early results demonstrate that both ITAs can be reliably harvested in a skeletonized fashion in situ through sternal-sparing, small subxiphoid access in 2 experimental models. This innovative approach warrants further exploration toward facilitating complete arterial revascularization and the further adoption of minimally invasive coronary artery bypass graft surgery.
Keywords
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
