Abstract
Limited cure depth is a drawback of light-activated composites. We hypothesize that curing light transmission and cure depth are influenced by monomer reactivity and filler/resin refractive index mismatch. Light transmission throughout cure was recorded for composites based on strontium (refractive index 1.51) or barium (refractive index 1.53) glass fillers. Fillers were mixed (70 wt%) with 4 bisphenol-A diglycidyl-ether-dimethacrylate (bis-GMA):triethylene glycol dimethacrylate (TEGDMA) formulations with refractive indices ranging from 1.4703 to 1.5370. Following polymerization, cure depth and pre- and post-cure translucency parameters were determined. Transmission changes and cure depths related to monomer reactivity and filler/resin refractive index mismatch with significant interaction. Composites became more opaque or translucent on curing. Optimizing filler/resin refractive index mismatch provides increased curing depth and assists shade-matching.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
