Abstract
Mechanical fatigue-related degeneration of the temporomandibular joint (TMJ) disc may be promoted by tractional forces. This study tested the hypotheses that tractional forces following static loading of the TMJ disc: (1) increase with compressive strain at the start of movement, and (2) are velocity-dependent during movement. Sixty-four porcine discs received a 10-N static load via an acrylic indenter for 1 or 30 sec before cyclic movement. Physical data were recorded and analyzed by ANOVA. The results showed that compressive strain and tractional forces were largest for the start of movement following 30 sec of static loading (p ≤ 0.0001) and were correlated (R2 = 0.84). Peak tractional forces were linearly and positively related to velocity of movement (R2 = 0.85), and were highest during Cycle 1 after 30 sec of loading (p ≤ 0.0067). The results demonstrated that tractional forces were strain-related at the start of movement and velocity-dependent during movement. Abbreviations: ANOVA = analysis of variance, PBS = phosphate-buffered physiological saline solution, TMJ = temporomandibular joint, μT =tractional coefficient, μs = static coefficient of friction.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
