Abstract
Temperature affects the polymerization behavior of dimethacrylate-based materials. This study describes the influence of pre-polymerization temperature and exposure duration on polymerization kinetics of a commercial dental photo-activated composite at the top and at 2-mm depth. We used the temperature-controlled stage of a diamond-attenuated-total-reflectance unit to pre-set composite temperature between 3° and 60°C. Composite was light-exposed by a conventional quartz-tungsten-halogen curing unit for 5, 10, 20, or 40 sec. Real-time conversion, maximum conversion rate (R p max), time to achieve R p max, and conversion at R p max were calculated from infrared spectra. Composite pre-warming enhanced maximal polymerization rate and overall monomer conversion (top significantly greater than 2 mm). Time when R p max occurred did not change with temperature, but occurred sooner at the top than at 2-mm depth. Conversion at R p max increased with temperature, allowing more of the reaction to occur prior to vitrification than at room temperature.
Get full access to this article
View all access options for this article.