Structural and Mechanical Properties of Mandibular Condylar Bone

Abstract

The trabecular bone of the mandibular condyle is structurally anisotropic and heterogeneous. We hypothesized that its apparent elastic moduli are also anisotropic and heterogeneous, and depend on trabecular density and orientation. Eleven condyles were scanned with a micro-CT system. Volumes of interest were selected for the construction of finite element models. We simulated compressive and shear tests to determine the principal mechanical directions and the apparent elastic moduli. Compressive moduli were relatively large in directions acting in the sagittal plane, and small in the mediolateral direction. The degree of mechanical anisotropy ranged from 4.7 to 10.8. Shear moduli were largest in the sagittal plane and smallest in the transverse plane. The magnitudes of the moduli varied with the condylar region and were proportional to the bone volume fraction. Furthermore, principal mechanical direction correlated significantly with principal structural direction. It was concluded that variation in trabecular structure coincides with variation in apparent mechanical properties.

Get full access to this article

View all access options for this article.

References

Giesen EB, van Eijden TM -2000-. The three-dimensional cancellous bone architecture of the human mandibular condyle. J Dent Res 79:957–963.

Giesen EB, Ding M, Dalstra M, van Eijden TM -2001-. Mechanical properties of cancellous bone in the human mandibular condyle are anisotropic. J Biomech 34:799–803.

Giesen EB, Ding M, Dalstra M, van Eijden TM -2003-. Architectural measures of the cancellous bone of the mandibular condyle identified by principal components analysis. Calcif Tissue Int 73:225–231.

Harrigan TP, Mann RW -1984-. Characterization of microstructural anisotropy in orthotropic materials using a second rank tensor. J Mater Sci 19:761–767.

Hildebrand T, Rüegsegger P -1997-. A new method for the model-independent assessment of thickness in three-dimensional images. J Microsc 185:67–75.

Hollister SJ, Brennan JM, Kikuchi N -1994-. A homogenization sampling procedure for calculating trabecular bone effective stiffness and tissue level stress. J Biomech 27:433–444.

Koolstra JH, van Eijden TMGJ -2005-. Combined finite-element and rigid-body analysis of human jaw joint dynamics. J Biomech 38:2431–2439.

van Eijden TM, Korfage JA, Brugman P -1997-. Architecture of the human jaw-closing and jaw-opening muscles. Anat Rec 248:464–474.

van Eijden TM, van Ruijven LJ, Giesen EB -2004-. Bone tissue stiffness in the mandibular condyle is dependent on the direction and density of the cancellous structure. Calcif Tissue Int 75:502–508.

10.

van Rietbergen B, Weinans H, Huiskes R, Odgaard A -1995-. A new method to determine trabecular bone elastic properties and loading using micromechanical finite-element models. J Biomech 28:69–81.

11.

van Rietbergen B, Odgaard A, Kabel J, Huiskes R -1996-. Direct mechanics assessment of elastic symmetries and properties of trabecular bone architecture. J Biomech 29:1653–1657.

12.

van Ruijven LJ, Giesen EB, van Eijden TM -2002-. Mechanical significance of the trabecular microstructure of the human mandibular condyle. J Dent Res 81:706–710.

13.

van Ruijven LJ, Giesen EB, Farella M, van Eijden TM -2003-. Prediction of mechanical properties of the cancellous bone of the mandibular condyle. J Dent Res 82:819–823.

14.

van Ruijven LJ, Giesen EB, Mulder L, Farella M, van Eijden TM -2005-. The effect of bone loss on rod-like and plate-like trabeculae in the cancellous bone of the mandibular condyle. Bone 36:1078–1085.