Abstract
The use of oxalate desensitizers on acid-etched dentin prior to adhesive application can result in subsurface tubular occlusion by calcium oxalate crystals. However, the solubility of calcium oxalate increases in acidic solution. We hypothesized that total-etch adhesives can, depending upon their pH, interact with oxalate-desensitizer-treated dentin in an adverse manner. Acid-etched human dentin treated with 2 oxalate desensitizers (BisBlock and Super Seal) was bonded with 4 simplified total-etch adhesives: One-Step (OS), Single Bond (SB), OptiBond Solo Plus (OB), and Prime&Bond NT (PB). Composite-dentin beams were examined by SEM and TEM, both of which revealed numerous spherical globules on OB- and PB-bonded, desensitizer-treated dentin, but not in OS or SB samples. Bond strengths produced by OB and PB were significantly lower in oxalate-treated specimens than those produced by OS or SB. These surface globules may have interfered with hybridization of demineralized dentin with OB and PB resins and caused compromised bond strengths.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
