Abstract
The integrity of fiber-reinforced composite (FRC) prostheses is dependent, in part, on flexural rigidity. The object of this study was to determine if the flexure behavior of uniform FRC beams with restrained or simply supported ends and various length/depth (L/d) aspect ratios could be more accurately modeled by correcting for shear. Experimental results were compared with three analytical models. All models were accurate at high L/d ratios, but the shear-corrected model was accurate to the lowest, more clinically relevant, L/d values. In this range, more than 40% of the beam deflection was due to shear.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
