Abstract
A helical axis describing mandibular motion can be calculated from two distinct positions of the mandible; however, as these positions come closer together, calculation errors increase. This study investigated the effects of errors in the calculated helical axis on simulated mandibular motion by the measurement of changes in occlusal contacts. A standard helical axis was calculated from a simulated lateral movement. A series of digital interocclusal records from centric to a 5° mandibular rotation about the standard helical axis was created. Digital dental cast models were aligned to the interocclusal records. Helical axis parameters and occlusal contacts calculated with the use of the aligned digital models were compared with those of the standard. Helical axes calculated from mandibular positions separated by 1.5° to 5.0° yielded equivalent occlusal contacts. Qualitatively, contacts for helical axes calculated from jaw rotations of 0.7° or larger were nearly identical to those of the standard.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
