The Use of Aiding Techniques and Continuous Cursor Controllers to Designate Targets in 3-D Space

Abstract

The purpose of this study was to determine the effects of three variables on target designation tasks using three-dimensional (3-D) maps. Variable 1: two continuous control techniques, Variable 2: two aiding techniques, and Variable 3: two target densities. The two continuous controllers used were an ultrasonic hand tracker and a joystick. The two aiding techniques were referred to as simple and enhanced aiding. Simple aiding consisted of a color change to the target when the cursor penetrated the target volume. Enhanced aiding consisted of an algorithm (Osga, 1991) that “pulled” the cursor to the closest target and then changed its color. The two target densities were high (16 targets) and low (8 targets).

Results showed that the hand tracker provided the best performance with respect to total target designation time. Enhanced aiding provided the best performance in terms of both total target designation time and percent errors. For the density variable, the common speed-accuracy trade-off was present — the low density condition had faster total target designation times, but the high density had less percent errors.

Get full access to this article

View all access options for this article.

References

Barthelemy

K.K.

Reising

J.M.

Hartsock

D.C.

(1991). Target designation in a perspective view, 3-D map using a joystick, hand tracker, or voice. In Proceedings of the Human Factors Society 35th Annual Meeting (pp. 97–101). Santa Monica, CA: Human Factors Society.

Gopher

Donchin

(1986). Workload - an examination of the concept. In Boff

Kaufman

Thomas

, Handbook of perception and human performance (pp. 41–1 - 41–49). New York: Wiley.

Kopala

C.J.

(1979). The use of color-coded symbols in a highly dense situation display. In Proceedings of the Human Factors Society 23rd Annual Meeting (pp. 397–401). Santa Monica, CA: Human Factors Society.

Mazur

K.M.

Reising

J.M.

(1990). The relative effectiveness of three visual depth cues in a dynamic air situation display. In Proceedings of the Human Factors Society 34th Annual Meeting (pp. 16–19). Santa Monica, CA: Human Factors Society.

Osga

G.A.

(1991). Using enlarged target area and constant visual feedback to aid cursor pointing tasks. In Proceedings of the Human Factors Society 35th Annual Meeting (pp. 369–373). Santa Monica, CA: Human Factors Society.

Parrish

R. V.

Williams

S. P.

(1990). Determination of depth-viewing volumes for stereo three-dimensional graphic displays (Tech. Memorandum 90–B-016). National Aeronautics and Space Administration.

Reising

J.M.

Liggett

K.K.

Rate

Hartsock

D.C.

(1992). 3-D target designation using two control devices and an aiding technique. In Proceedings of the SPIE Electronics Imaging Symposium. Bellinghan, WA: Society of Photo-Optical Instrumentation Engineers.

Reising

J.M.

Mazur

K.M.

(1990). 3-D displays for cockpits: where they payoff. In Proceedings of the SPIE/SPSE Symposium on Electronic Imaging Science and Technology. Bellingham, WA: Society of Photo-Optical Instrumentation Engineers.

Vernon

Southard

D. A.

Leger

J.R.

Conway

J.L.

(1990). Stereoscopic displays for terrain database visualization. In Proceedings of the National Computer Graphics Association Conference (pp. 16–25). Fairfax, VA: National Computer Graphics Association.

10.

Ware

Slipp

(1991). Using velocity control to navigate 3D graphical environments: a comparison of three interfaces. In Proceedings of the Human Factors Society 35th Annual Meeting (pp. 300–304). Santa Monica, CA: Human Factors Society.