Sage Journals: Discover world-class research

Abstract

This paper describes a study of the after-reach hazard using a power press simulator. The after-reach hazard occurs when a worker reaches into the point of operation on a power press after initiating the downstroke of the press ram. The hand reaching capabilities of industrial power press operators were measured to quantify hand reach speed and to determine variables which may affect after-reach movement times. The results of this study identified three variables which may be important in characterizing a worker's ability to make rapid hand reach movements: age, gender, and the location of the dual palm button workstation. Another key finding was that male workers, 30 years of age and younger, had the fastest hand reach speed of all groups tested and appear to be at the greatest risk of sustaining a traumatic injury due to the after-reach hazard.

Get full access to this article

View all access options for this article.

References

Davies

B.T.

Mebarki

(1981). Hand movement times and machine guarding. Ergonomics, 24(5), 387–391.

Draper

N.R.

Smith

(1966). Selecting the “Best” Regression Equation. Applied Regression Analysis. New York: John Wiley & Sons.

Knauss

I.P.

(June 1974). Guarding against after-reach on metalworking presses, Die Berufsgenossenschaft.

Lobl

I.O.

(1935). Concerning two-hand trip in eccentric presses, Reicharbeitsblatt. (Berlin). No. 20, Part III, 150.

Masters

R. W.

(1973). The location of two-hand trip devices on full revolution mechanical power presses with regard to operator safety, Master's Thesis, Texas A & M University, College Station, Texas.

McCaffrey

D.P.

(1981). Work-related amputations by type and prevalence. Monthly Labor Review, 104(3), 35–41.

Occupational Safety and Health Administration. (1982–1984). Report of Injuries to Mechanical Power Press Operators. Office of Mechanical Engineering Safety Standards. Washington, D.C.

Pizatella

T.J.

Etherton

J.R.

Jensen

R.C.

Oppold

J.A.

(1983). Investigation of the after-reach hazard in two-hand controlled power press operations. Scandinavian Journal of Work, Environment & Health, 9 194–200.

U.S. Department of Labor, Occupational Safety and Health Administration. (1981). General Industry Safety and Health Standards (29 CFR 1910). Subpart O, Machinery and Machine Guarding, 1910.217.

10.

Van Ballegooijen

G.A.

(1978). Measurement on man–machine systems under consideration of the repositioning risk. In IVSS, Berufsgenossenschaft Nahrungsmittel und Gaststatten, Symposium, Heft 6, Mannheim, Germany, (Paper no. 5) 79–89.

Simulation of the After-Reach Hazard on Dual Palm Button Workstations

Abstract

Get full access to this article

References