Physiological Response of Operators during Power Tiller Use for Paddy Field Cultivation

Abstract

Power tillers (single axle, two-wheel hand tractors) are widely used for paddy field cultivation in Thailand. Currently, over one million power tillers are being used as they suit both the economical and physical conditions of paddy farming in developing countries. Controlling these hand tractors while walking behind is often hard work. Safety and health concerns associated with the use of these machines have not been well documented. This study was aimed at evaluating the physical response of operators during various operations by power tillers in paddy field. The most popular power tiller model in Thailand was used for this investigation. Field tests were conducted to determine the physical response of operators while using this machine. The response was assessed through measurement of operator heart rates during different operations. The comfort, working posture and the task were also evaluated. The physical work capacity was established with the help of a bicycle ergometer. The field operations carried out were first-plowing, second-plowing and harrowing. The tillage equipment used were moldboard plow, disc plow and peg tooth harrow. A statistical analysis was conducted to compare the effects of environmental factors and working intensity in each activity and results were compared with the standards. It was observed that the physical response during some of the operations exceeded the physical work capacity of the operators. It was noticed that the excessive physiological response was contributed by power tiller use as well as environmental factors. Working with power tiller in muddy paddy fields in a hot and humid climate also contributed to excessive workload. Surface conditions in the field also had a direct effect on physiological response of the operator. Energy cost during wetland operation was also due to unfavorable working conditions. Some ways to improve the design of the power tiller to make it more comfortable for the operator were suggested.

Get full access to this article

View all access options for this article.

References

Bink

(1962). The physical working capacity in relation to working time and age. Ergonomics, 5(1):25–28.

Bonjer

F. H.

(1962). Actual energy expenditure in relation to the physical working capacity. Ergonomics, 5(1):29–31.

Brouha

(1960). Physiology in Industry. Pergamon Press, New York.

Choudhry

A. W.

(1989). Occupational health in agriculture. East African Newsletter on Occupational Health and Safety, 3:16–19.

Dibbits

H. J.

Van Loon

J. H.

Curfs

H. P. F.

(1978). The physical strain of operating a two-wheeled tractor. World Crop, 30(6):250–252.

Hettinger

Paquin

K. H.

Sucker

(1968). Kalorienverbrauch und erholungs zeitberechnung, Bartmann-Verlag GMBH Frechen, 1:36. (in Germany).

Intaranont

Vanwonterghem

(1993). Study of the Exposure Limits in Constraining Climatic Conditions for Strenuous Tasks: An Ergonomics Approach. Final Report of Join Research Project of Chulalongkom University, Bangkok, Thailand, Cergo International, Brussels, Belgium and The Commission of the European Communities, Bangkok.

Kathirvel

Job

T. V.

Karunanithi

Swaminathan

K. R.

(1991). Energy expenditure pattern of power tiller operator. Agricultural Mechanization in Asia, Africa and Latin America, 22(4): 18–20.

Kern

Muntzinger

W. F.

(1986). Ergonomics design of a two-hand operated multi-purpose device for cultivation. Trends in Ergonomics/Human Factors III, 1141–1148. Karwowski

(ed.). Elsevier Science Publishers B. V., North-Holland.

10.

Mamansari

D. U.

(1993). Anthropometry and Physical Work Capacity of Agricultural Labor in Central Plain of Thailand. Master of Engineering Thesis, No. AE-93-4, Asian Institute of Technology, Bangkok (unpublished).

11.

Mamansari

D. U.

(1998). Ergonomic evaluation of a commonly used power tiller in Thailand. Asian Institute of Technology, Doctor of Engineering dissertation No. AE 98-1 (unpublished).

12.

Rijk

A. G.

(1991). The process of mechanization in historical context. Utilization of Farm Machinery in Asia. Asian Productivity Organization, Tokyo.

13.

Salokhe

V. M.

Mamansari

D. U.

(1995). Physical workload during selected farm operations. Journal of Human Ergology, 24(2).

14.

Vanwonterghem

(1991). Assessment of workstrain for physical works in industry. Proceedings of Seminar on Validation of Heat Stress. Italy, September 1991.

15.

Vogt

J. J.

Meyer-Schwertz

M. T.

Metz

Foehr

(1973). Motor, thermal and sensory factors in heart rate variation: A methodology for indirect estimation of intermittent muscular work and environmental heat loads. Ergonomics, 6(1):45–60.