Endograft Planning without Preoperative Arteriography: A Clinical Feasibility Study

Abstract

Purpose:

To investigate an alternative method of preprocedural planning for aortic endografting based solely on spiral computed tomography (CT) with 3-dimensional (3D) reconstruction without preoperative arteriography.

Methods:

From August 1997 to April 1998, 25 consecutive patients with abdominal aortic aneurysms (AAA) were evaluated for endovascular repair by spiral CT scans (2-mm slice thickness) and computerized 3D model construction. No additional imaging for planning was performed. The aortoiliac dimensions, thrombus load, calcification, and vessel tortuosity were measured and evaluated from the 3D model of the aortoiliac segment. These data were used for selecting the patients; the configuration, diameter, and length of the endograft; and the attachment sites for deployment.

Results:

Primary procedural success was 92% (23/25). All endografts were deployed as planned, and there were no conversions to open repair. Six patients required adjunctive procedures for delivery system access or for iliac aneurysm exclusion, as predicted by the 3D model. Mean procedural time was 91 minutes (range 24 to 273). Two (8%) type II (side branch) endoleaks both sealed spontaneously within 1 month. No graft-related complications or death occurred, for a 30-day technical success rate of 100%.

Conclusions:

This computerized 3D model provided accurate data for preoperative evaluation of the aortoiliac segment for endovascular AAA repair. Satisfactory technical outcomes for aortic endografts can be achieved without the use of preprocedural invasive imaging.