This work presents a phenomenological model to capture the extent of hydrogen accumulated through the corrosion process in high hardness steel (HHS) and experimental evidence of environment-assisted corrosion in HHS through optical and electron micrographs. Experimental evidence showed extensive corrosion in an environmentally aged HHS compared to an as-received HHS with a similar composition, which resulted in hydrogen adsorption at the oxide/metal interface, lowering the critical stress required for the failure. A parametric study on the effects of initial concentration and retention rate shows that the hydrogen retention rate during the corrosion is an influential parameter in hydrogen accumulation, lowering durability.
NazarovAVuckoFThierryD. Scanning Kelvin probe for detection of the hydrogen induced by atmospheric corrosion of ultra-high strength steel. Electrochim Acta2016; 216: 130–139.
2.
ScullyJRDoganHLiD, et al.Controlling hydrogen embrittlement in ultra-high strength steels. In: CORROSION 2004, New Orleans. OnePetro; March 27 2004; 1–20.
3.
BuzzardRW. Hydrogen embrittlement of steel: Review of the literature. U.S. Government Printing Office, 1951.
4.
DanaAShortsleeveFTroianoA. Relation of flake formation in steel to hydrogen, microstructure, and stress. Trans Am Inst Min Metallur Eng1955; 203: 895–905.
5.
FrohmbergRBarnettWTroianoA. Delayed failure and hydrogen embrittlement in steel. Technical report, Case Institute of Technology, Cleveland, OH, 1954.
6.
JohnsonWH. On some remarkable changes produced in iron and steel by the action of hydrogen and acids. Nature1875; 11: 393.
7.
SimsC. The behaviour of gases in solid iron and steel. In Gases in metals. 1953, p. 152.
8.
SmithDP. Hydrogen in metals. Chicago, IL: Chicago University Press, 1948.
9.
TroianoAFrohmbergRBarnettWet al.Delayed failure and hydrogen embrittlement in steels. Trans Am Soc Metals1955; 47: 892–892.
10.
TroianoAR. The role of hydrogen and other interstitials in the mechanical behavior of metals. Trans ASM1960; 52: 54–80.
11.
TroianoAR. The role of hydrogen and other interstitials in the mechanical behavior of metals. Metallogr Microstruct Anal2016; 5: 557–569.
12.
ZapffeCSimsC. Hydrogen embrittlement, internal stress and defects in steel. Trans AIME1941; 145: 225–271.
13.
NanningaNGrochowsiJHeldtL, et al.Role of microstructure, composition and hardness in resisting hydrogen embrittlement of fastener grade steels. Corros Sci2010; 52: 1237–1246.
14.
LynchS. Interpreting hydrogen-induced fracture surfaces in terms of deformation processes: A new approach. Scr Mater2011; 65: 851–854.
15.
LynchS. Hydrogen embrittlement phenomena and mechanisms. Corros Rev2012; 30: 105–123.
16.
WalterRJewettRChandlerW. On the mechanism of hydrogen-environment embrittlement of iron-and nickel-base alloys. Mater Sci Eng1970; 5: 99–110.
17.
LynchS. Environmentally assisted cracking: overview of evidence for an adsorption-induced localised-slip process. Acta Metall1988; 36: 2639–2661.
18.
NagumoM. Hydrogen related failure of steels – a new aspect. Mater Sci Technol2004; 20: 940–950.
19.
Van der VenACederG. The thermodynamics of decohesion. Acta Mater2004; 52: 1223–1235.
20.
BirnbaumHKSofronisP. Hydrogen-enhanced localized plasticity – a mechanism for hydrogen-related fracture. Mater Sci Eng A1994; 176: 191–202.
21.
RobertsonI. The effect of hydrogen on dislocation dynamics. Eng Frac Mech2001; 68: 671–692.
22.
NovakPYuanRSomerdayB, et al.A statistical, physical-based, micro-mechanical model of hydrogen-induced intergranular fracture in steel. J Mech Phys Solids2010; 58: 206–226.
RobertsonIMSofronisPNagaoA, et al.Hydrogen embrittlement understood. Metall Mater Trans B2015; 46: 1085–1103.
25.
RozenakPRobertsonIBirnbaumH. Hvem studies of the effects of hydrogen on the deformation and fracture of AISI type 316 austenitic stainless steel. Acta Metall Mater1990; 38: 2031–2040.
26.
EliazNShacharATalB, et al.Characteristics of hydrogen embrittlement, stress corrosion cracking and tempered martensite embrittlement in high-strength steels. Eng Fail Anal2002; 9: 167–184.
27.
KimSJParkJSJungSP. Corrosion-induced hydrogen evolution, absorption, and cracking behaviors of ultra-high-strength galvanized and galvannealed steel sheets. npj Mater Degrad2022; 6: 31 .
28.
LingRChenJPShaoJ, et al.Degradation of organic compounds during the corrosion of zvi by hydrogen peroxide at neutral pH: Kinetics, mechanisms and effect of corrosion promoting and inhibiting ions. Water Res2018; 134: 44–53.
29.
TianHWangXCuiZ, et al.Electrochemical corrosion, hydrogen permeation and stress corrosion cracking behavior of e690 steel in thiosulfate-containing artificial seawater. Corros Sci2018; 144: 145–162.
30.
RajabipourAMelchersRE. Service life of corrosion pitted pipes subject to fatigue loading and hydrogen embrittlement. Int J Hydrogen Energy2018; 43: 8440–8450.
31.
BeachemCD. A new model for hydrogen-assisted cracking (hydrogen “embrittlement”). Metall Mater Trans B1972; 3: 441–455.
32.
SongEJBhadeshiaHSuhDW. Effect of hydrogen on the surface energy of ferrite and austenite. Corros Sci2013; 77: 379–384.
33.
AnLSParkYCLeeSH, et al.Evaluating the threshold for corrosion-to-fatigue crack transition using a corroded steel plate from an in-service bridge. J Struct Eng2022; 148: 04022060.
34.
FengLYuJZhengJ, et al.Experimental and numerical study of residual ultimate strength of hull plate subjected to coupled damage of pitting corrosion and crack. Ocean Eng2024; 294: 116710.
35.
MurtazaGAkidR. Empirical corrosion fatigue life prediction models of a high strength steel. Eng Fract Mech2000; 67: 461–474.
36.
RamsamoojDVShugarTA. Modeling of corrosion fatigue in metals in an aggressive environment. Int J Fatigue2001; 23: 301–309.
37.
DjukicMBSijacki ZeravcicVBakicGM, et al.Hydrogen damage of steels: A case study and hydrogen embrittlement model. Eng Fail Anal2015; 58: 485–498.
38.
ZvirkoONykyforchynHKrechkovskaH, et al.Evaluating hydrogen embrittlement susceptibility of operated natural gas pipeline steel intended for hydrogen service. Eng Fail Anal2024; 163: 108472.
39.
ASTM-E8/E8M. Standard test methods for tension testing of metallic materials. In: Annual book of ASTM standards. West Conshohocken, PA: ASTM International, 2015, pp.1–31.
40.
ASTM-G129. Standard practice for slow strain rate testing to evaluate the susceptibility of metallic materials to environmentally assisted cracking. In: Annual book of ASTM standards. West Conshohocken, PA: ASTM International, 2021. 1-7.https://www.astm.org.
41.
ISO-7539. Corrosion of metals and alloys-stress corrosion testing. ISO, 2005.
42.
Martínez-PañedaEHarrisZDFuentes-AlonsoS, et al.On the suitability of slow strain rate tensile testing for assessing hydrogen embrittlement susceptibility. Corros Sci2020; 163: 108291.
43.
NACE-TM0198. Slow strain rate test method for screening corrosion-resistant alloys for stress corrosion cracking in sour oilfield service. Houston, TX: NACE, 2011, p. 27.
44.
WilliamsWR. Study of alloy and process modifications to design hydrogen resilient high hardness steels. PhD Thesis, Mississippi State University, 2021.
KrakowRBennettRJJohnstoneDN, et al.On three-dimensional misorientation spaces. Proc R Soc A: Math Phys Eng Sci2017; 473: 20170274.
47.
PantleonW. Resolving the geometrically necessary dislocation content by conventional electron backscattering diffraction. Scr Mater2008; 58: 994–997.
48.
G148-97 A. Standard practice for evaluation of hydrogen uptake, permeation, and transport in metals by an electrochemical technique. ASTM Int2011; 1: 1–10.
MultiphysicsC. Introduction to comsol multiphysics®.. Burlington, MA: COMSOL Multiphysics, 1998.
51.
ChenYSHuangCLiuPY, et al.Hydrogen trapping and embrittlement in metals – a review. Int J Hydrogen Energy2024; 136: 789–821.
52.
AlcántaraJChicoBSimancasJet al.Marine atmospheric corrosion of carbon steel: A review. Materials2017; 10: 406.
53.
El KadiriHHorstemeyerMBammannD. A theory for stress-driven interfacial damage upon cationic-selective oxidation of alloys. J Mech Phys Solids2008; 56: 3392–3415.
54.
SuzukiS. Characterization of formation of ferrous and ferric oxides in aqueous solution from a multidisciplinary viewpoint. ISIJ Int2022; 62: 800–810.
55.
AlcántaraJChicoBDíazI, et al.Airborne chloride deposit and its effect on marine atmospheric corrosion of mild steel. Corros Sci2015; 97: 74–88.
56.
NešićS. Key issues related to modelling of internal corrosion of oil and gas pipelines – a review. Corros Sci2007; 49: 4308–4338.
57.
KordunO. The influence of solar radiation on temperature increment of sheet steel structures. Archiv Civil Eng2015; 61: 89–102 .
58.
GrujicicMRamaswamiSSnipesJ, et al.Multiphysics modeling and simulations of mil a46100 armor-grade martensitic steel gas metal arc welding process. J Mater Eng Perform2013; 22: 2950–2969.
59.
ChicotDMendozaJZaouiA, et al.Mechanical properties of magnetite (FeO), hematite (-FeO) and goethite (-FeOOH) by instrumented indentation and molecular dynamics analysis. Mater Chem Phys2011; 129: 862–870.
60.
GortonATBitsianesGJosephTL. Thermal expansion coefficients for iron and its oxides from x-ray diffraction measurements at elevated temperatures. Trans Metall Soc AIME1965; 233: 1519–1525.
61.
OuglovaABerthaudYFrançoisM, et al.Mechanical properties of an iron oxide formed by corrosion in reinforced concrete structures. Corros Sci2006; 48: 3988–4000.
62.
VenezuelaJLiuQZhangM, et al.A review of hydrogen embrittlement of martensitic advanced high-strength steels. Corros Rev2016; 34: 153–186.
63.
BhadeshiaHKDH. Prevention of hydrogen embrittlement in steels. ISIJ Int2016; 56: 24–36.
64.
GuoHBarnard AS. Proton transfer in the hydrogen-bonded chains of lepidocrocite: A computational study. Phys Chem Chem Phys2011; 13: 17864–17869.
OotsukaSFujitaSTadaE, et al.Evaluation of hydrogen absorption into steel in automobile moving environments. Corros Sci2015; 98: 430–437.
67.
AyasCDeshpandeVFleckN. A fracture criterion for the notch strength of high strength steels in the presence of hydrogen. J Mech Phys Solids2014; 63: 80–93.
