Ni–W, Ni–W/CeO2 and Ni–W/CeO2–Y2O3 coatings were created by the electroplating method. The microstructure and chemical composition of the coatings were examined using field-emission scanning electron microscopy and energy dispersive spectroscopy, respectively. The phase composition was investigated by X-ray diffraction. The electrochemical test was performed to evaluate the corrosion resistance of the composite coatings. The average hardness values of the coatings were also determined. The results showed that Y2O3 particles considerably increased the corrosion resistance of the Ni–W/CeO2 composite coating. The microhardness evaluations revealed that the highest hardness value was obtained for the Ni–W/CeO2–Y2O3-coated Cu.
AllahyarzadehMHAliofkhazraeiMRezvanianAR, et al.Ni-W electrodeposited coatings: characterization, properties and applications. Surf Coat Technol2016; 307: 978–1010.
2.
ZhanLMaZLiB, et al.Current status of research on electrodeposited Ni-W alloy coating. E3S Web Conf2021; 02085: 261.
3.
DasMKLiRQinJ, et al.Effect of electrodeposition conditions on structure and mechanical properties of Ni-W/diamond composite coatings. Surf Coat Technol2017; 309: 337–343.
4.
GigaAKimotoYTakigawaY,et al.Demonstration of an inverse Hall–Petch relationship in electrodeposited nanocrystalline Ni–W alloys through tensile testing. Scripta Mater2006; 55: 143–146.
5.
SunwangNWangyaoPBoonyongmaneeratY. The effects of heat treatments on hardness and wear resistance in Ni–W alloy coatings. Surf Coat Technol2011; 206: 1096–1101.
6.
AllahyarzadehMHAliofkhazraeiMRouhaghdamARS,et al.Electrodeposition of Ni–W–Al2O3 nanocomposite coating with functionally graded microstructure. J Alloy Compd2016; 666: 217–226.
7.
LiBZhangWLiD,et al.Electrodeposition of NiW/ZrO2 nanocrystalline film reinforced by CeO2 nanoparticles: structure, surface properties and corrosion resistance. Mater Chem Phys2019; 229: 495–507.
8.
LiBLiDMeiT,et al.Fabrication and optimization of Ni-W/ZrO2-CeO2 composite coating for enhanced hardness and corrosion resistance. Results Phys2019; 13: 102375.
9.
ChoiJHGyawaliGDhakalDR, et al.Electrodeposited Ni–W–TiC composite coatings: effect of TiC reinforcement on microstructural and tribological properties. Acta Metall Sin (English Letters)2020; 33: 573–582.
10.
HeZZhouYWangY, et al.Preparation and properties of Ni-W-P-TiO2 nanocomposite coatings developed by a sol-enhanced electroplating method. Chinese J Chem Eng2022; 44: 369–376.
11.
XingSWangLJiangC, et al.Influence of Y2O3 nanoparticles on microstructures and properties of electrodeposited Ni–W–Y2O3 nanocrystalline coatings. Vacuum2020; 181: 109665.
12.
WangH-TSheuH-HGerM-D,et al.The effect of heat treatment on the microstructure and mechanical properties of electrodeposited nanocrystalline Ni–W/diamond composite coatings. Surf Coat Technol2014; 259: 268–273.
13.
ZhangXQinJPerasinjaroenT, et al.Preparation and hardness of pulse electrodeposited Ni–W–diamond composite coatings. Surf Coat Technol2015; 276: 228–232.
14.
RahmanOSAWasekarNPSundararajanG,et al.Experimental investigation of grain boundaries misorientations and nano twinning induced strengthening on addition of silicon carbide in pulse electrodeposited nickel tungsten composite coating. Mater Charact2016; 116: 1–7.
15.
Beltowska-LehmanEIndykaPBigosA, et al.Ni–W/ZrO2 nanocomposites obtained by ultrasonic DC electrodeposition. Mater Des2015; 80: 1–11.
16.
Beltowska-LehmanEIndykaPBigosA, et al.Effect of hydrodynamic conditions of electrodeposition process on microstructure and functional properties of Ni-W/ZrO2 nanocomposites. J Electroanal Chem2016; 775: 27–36.
17.
DadvandMSavadogoO. Synthesis and characterization of novel NiW–CeO2 composite coating with enhanced corrosion and wear resistance. Coatings [Internet]2022; 12.
18.
ZhangXQinJDasMK, et al.Co-electrodeposition of hard Ni-W/diamond nanocomposite coatings. Sci Rep2016; 6: 22285.
19.
LiBZhangW. Microstructural, surface and electrochemical properties of pulse electrodeposited Ni–W/Si3N4 nanocomposite coating. Ceram Int2018; 44: 19907–19918.
20.
SassiWDhouibiLBerçotP,et al.The effect of SiO2 nanoparticles dispersion on physico-chemical properties of modified Ni–W nanocomposite coatings. Appl Surf Sci2015; 324: 369–379.
21.
LiBLiDMeiT, et al.Fabrication and characterization of boron nitride reinforced Ni–W nanocomposite coating by electrodeposition. J Alloy Compd2019; 777: 1234–1244.
22.
LiYZhuY. Electrodeposition of Ni-W/TiO2 composite coatings on Q345 pipeline steel and their corrosion resistance and anti-fouling performance in simulated oilfield wastewater. Int J Electrochem Sci2022; 17: 220727.
23.
AhmadiMGuinelM. Synthesis, characterization and understanding of the mechanisms of electroplating of nanocrystalline–amorphous nickel–tungsten alloys using in situ electrochemical impedance spectroscopy. J Alloy Compd2013; 574: 196–205.
24.
TripathiMKSinghVB. Microstructure and properties of Si3N4 and TiN nano-particles reinforced electrodeposited functional Ni-Fe matrix nanocomposite. J Electrochem Soc2016; 163: D453.
25.
XuYYXueYJYangF, et al.Preparation of Ni-ZrO2-CeO2 nanocomposite coatings by pulse electrodeposition. Appl Mech Mater2013; 395-396: 174–178.
BoseRKalaignanGP. Fortification of Ni–Y2O3 nanocomposite coatings prepared by pulse and direct current methods. Ionics2011; 17: 495–501.
31.
ChaudhariAKSinghVBSinghB. Structural features and functional properties of Y2O3 reinforced nickel matrix nanocomposites. ChemistrySelect2020; 5: 11573–11582.
32.
XuRDWangJLZhangYZ,et al.Pulse electrodepositon of Ni-W-P-CeO2-SiO2 composite coatings. Adv Mater Res2010; 97–101: 1389–1392.
33.
LuisettoITutiSBattocchioC, et al.Ni/CeO2–Al2O3 catalysts for the dry reforming of methane: the effect of CeAlO3 content and nickel crystallite size on catalytic activity and coke resistance. Appl Catal A: Gen2015; 500: 12–22.
34.
HanBYangYDengH, et al.Plasma-electrolytic-oxidation coating containing Y2O3 nanoparticles on AZ91 magnesium alloy. Int J Electrochem Sci2018; 13: 5681–5697.
35.
BouaeshiWLiD. Effects of Y2O3 addition on microstructure, mechanical properties, electrochemical behavior, and resistance to corrosive wear of aluminum. Tribol Int2007; 40: 188–199.
36.
JiaDShiWZhangH, et al.Effects of Y2O3 content on wear resistance and corrosion resistance of 316L/TiC coating fabricated by laser cladding. Coatings2023; 13: 1348.
37.
HuangBHongXChenP, et al.Effect of Y2O3 content on microstructure and properties of Ni-based self-lubricating composite coating. Metall Res Technol2023; 120: 413.
38.
Aperador-ChaparroWAAngarita-MoncaleanoIILópez-CamargoMN. Corrosion resistance improvement of iron-yttrium mixtures by powder metallurgy.
39.
DingZFangZWangG, et al.Microstructure and properties of Mo-Si-B-Y2O3 composite coating on nickel-based alloy by laser cladding. Opt Laser Technol2023; 164: 109473.
40.
WuBYuX-hZhangB,et al.Preparation and characterization of graphite–nickel composite coatings by automatic brush plating. Surf Coat Technol2008; 202: 1975–1979.
41.
AskariHZbibHMSunX. Multiscale modeling of inclusions and precipitation hardening in metal matrix composites: application to advanced high-strength steels. J Nanomech Micromech2013; 3: Medium: X; Size: 24–33.
42.
KioussisNGGhoniemNM. Modeling of dislocation interaction with solutes, nano-precipitates and interfaces: a multiscale challenge. J Comput Theor Nanosci2010; 7: 1317–1346.
43.
LiuFCocksAFTarletonE. Dislocation dynamics modelling of the creep behaviour of particle-strengthened materials. Proce R Soc A2021; 477: 20210083.
44.
WangCCepeda-JimenezCMPérez-PradoMT. Dislocation-particle interactions in magnesium alloys. Acta Mater2020; 194: 190–206.
