The effect of temperature on the corrosion behaviour of Inconel alloys employed for the electroreduction of metal oxides to metals in a lithium molten salt was investigated. The ratio of the weight loss of Inconel 601 and 690 to that of Inconel 600, Inconel 601 and 690 was approximately four and six at 650 °C, and five and eight times higher than that of Inconel 600 above 750 °C for 72 h, respectively. The corrosion products of all the alloys tested at 650 °C and 750 °C for 72 h were mainly Cr2O3 and FeCr2O4; however, only Cr2O3 was obtained when Inconel 690 was corroded at 750 °C or higher. Additionally, an alloy with a composition of max. 16.3 wt.% Cr, min. 73.66 wt.% Ni and well below 8.15 wt.% Fe was expected to exhibit excellent corrosion resistance in a lithium molten salt system at 650–850 °C.
RuhASpiegelM. Thermodynamic and kinetic consideration on the corrosion of Fe, Ni and Cr beneath a molten KCl-ZnCl2 mixture. Corros Sci2006; 48: 679–695.
2.
IndacocheaJESmithJLLitkoKR, et al.High-temperature oxidation and corrosion of structural materials in molten chlorides. Oxid Met2001; 55: 1–16.
3.
ChenGZFrayDJFarthingTW. Direct electrochemical reduction of titanium dioxide to titanium in molten calcium chloride. Nature2000; 407: 361–364.
4.
SherFAl-SharaNKIqbalSZ, et al.Enhancing hydrogen production from steam electrolysis in molten hydroxides via selection of non-precious metal electrodes. Int J Hydr Energy2020; 45: 28260–28271.
5.
SongSAKimHTKimKY, et al.Effect of LiNiO2-coated cathode on cell performance in molten carbonate fuel cell. Int J Hydr Energy2019; 44: 12085–12093.
6.
LeeMHLeeCWHamHC, et al.Mechanical strength improvement of aluminum foam-reinforced matrix for molten carbonate fuel cells. Int J Hydr Energy2017; 42: 16235–16243.
7.
RehmanAShirani BidabadiMHLiangY, et al.Hot corrosion behaviour of yttrium and aluminium modified wear resistance coating alloy in mixed sulphate at 900 °C. Corros Sci2020; 165: 108369.
8.
FernandezAGCabezaLF. Corrosion evaluation of eutectic chloride molten salt for new generation of CSP plants, part 2: materials screening performance. J Energy Storage2020; 29: 101381.
9.
GrosuYAnagnostopoulosANavarroME, et al.Inhibiting hot corrosion of molten Li2CO3-Na2CO3-K2CO3 salt through graphitization of construction materials for concentrated solar power. Sol Energy Mater Sol Cells2020; 215: 110650.
10.
LiuQWangZLiuW, et al.Ni-Mo-Cr alloy corrosion in molten NaCl-KCl-MgCl2 salt and vapour. Corros Sci2021; 180: 109183.
11.
McAlpineSWSkowronskiNCZhouW, et al.Corrosion of commercial alloys in FLiNaK molten salt containing EuF3 and simulant fission product additives. J Nucl Mater2020; 532: 151994.
12.
KimWBKwonSCChoSH,et al.Effect of the grain size of YSZ ceramic materials on corrosion resistance in a hot molten salt CaCl2-CaF2-CaO system. Corros Sci2020; 170: 108664.
13.
UusitaloMAVuoristoPMJMäntyläTA. High temperature corrosion of coatings and boiler steels below chlorine-containing salt deposits. Corros Sci2004; 46: 1311–1331.
14.
MohantyBPShoresDA. Role of chlorides in hot corrosion of a cast Fe-Cr-Ni alloy. Part I: experimental studies. Corros Sci2004; 46: 2893–2907.
15.
LeiGLiCJiangZ,et al.Irradiation accelerated fluoride molten salt corrosion of nickel-based UNS N10003 alloy revealed by X-ray absorption fine structure. Corros Sci2020; 165: 108408.
16.
WuYLengBLiX, et al.Corrosion behavior of a wear resistant Co-Mo-Cr-Si alloy in molten fluoride salts. J Nucl Mater2020; 542: 152529.
17.
DonigerWHFalconerCElbakhshwanM, et al.Investigation of impurity driven corrosion behavior in molten 2LiF-BeF2 salt. Corros Sci2020; 174: 108823.
18.
YooBUKwonSCChoSH, et al.High-temperature stability of CSZ, YSZ, and MSZ ceramic materials in CaCl2-CaF2-CaO molten salt system. J Alloys Compd2019; 771: 924–935.
19.
ZhuangXLiuWXuX. Hot corrosion of different alloys in chloride and carbonate molten-salt mixtures under argon atmosphere. Sol Energy2019; 189: 254–267.
20.
TzvetkoffTKolchakovJ. Mechanism of growth, composition and structure of oxide films formed on ferrous alloys in molten salt electrolytes–a review. Mater Chem Phys2004; 87: 201–211.
21.
ZhuBLindberghG. Corrosion behaviour of high-chromium ferritic steels in molten carbonate in cathode environment. Electrochim Acta2001; 46: 2593–2604.
22.
SpiegelMBiedenkopfPGrabkeHJ. Corrosion of iron base alloys and high alloy steels in the Li2CO3-K2CO3 eutectic mixture. Corros Sci1997; 39: 1193–1210.
23.
MitsushimaSKamiyaNOtaKI. Corrosion of iron by Li2CO3 melt at 1073 K. J Electrochem Soc1990; 137: 2713–2716.
24.
KimWBChoiWSLimKS, et al.High-temperature corrosion behavior of al-coated Ni-Base alloys in lithium molten salt for electroreduction process. Coatings2021; 11: 328–341.
25.
WooHYLimGSKimWB, et al.Isothermal and cyclic corrosion behaviour of Ni-based alloys in an electrochemical reduction process. Corros Eng Sci Technol2021; 56: 513–521.
26.
ChoSHKwonSCKimDY, et al.Hot corrosion behaviour of nickel–cobalt-based alloys in a lithium molten salt. Corros Sci2019; 151: 20–26.
27.
ChoSHHongSSKangDS, et al.Hot corrosion behavior of Ni-base superalloys in a lithium molten salt. Met Mater Int2009; 15: 51–55.
28.
ChoSHHurJMSeoCS, et al.Hot corrosion behavior of Ni-base alloys in a molten salt under an oxidizing atmosphere. J Alloys Compd2009; 468: 263–269.
29.
LiXLHeSMZhouXT, et al.High-temperature corrosion behavior of Ni-16Mo-7Cr-4Fe superalloy containing yttrium in molten LiF-NaF-KF salt. J Nucl Mater2015; 464: 342–345.
30.
SidhuTSPrakashSAgrawalRD. Evaluation of hot corrosion resistance of HVOF coatings on a Ni-based in molten salt environment. Mater Sci Eng2006; 430: 64–78.
31.
WangJSunJZouB, et al.Hot corrosion behaviour of nanostructured zirconia in molten NaVO3 salt. Ceram Int2017; 43: 10415–10427.
32.
Mohammadi ZahraniEAlfantaziAM. High temperature corrosion and electrochemical behavior of INCONEL 625 weld overlay in PbSO4-Pb3O4-PbCl2-CdO-ZnO molten salt medium. Corros Sci2014; 85: 60–76.
33.
AiHYeXXJiangL, et al.On the possibility of severe corrosion of a Ni-W-Cr alloy in fluoride molten salts at high temperature. Corros Sci2019; 149: 218–225.
34.
WangXXinLWangF, et al.Influence of sputtered nanocrystalline coating on oxidation and hot corrosion of a nickel-based superalloy M951. J Mater Sci Technol2014; 30: 867–877.
35.
MahiniSAsiSKRabizadehT,et al.Effects of the pack Al content on the microstructure and hot corrosion behavior of aluminide coatings applied on Inconel-600. Surf Coat Technol2020; 397: 125949.
