Moisture Absorption and its Influence on the Tensile Properties of Glass-Fibre Reinforced Polyamide 6,6

Abstract

The equilibrium amounts of moisture absorbed by a range of grades of glass fibre reinforced polyamide 6,6 were approximately proportional to the weight fraction of the polymer. However, the moisture diffusivity was found to be also a function of variations in specimen preparation and microstructure. The diffusivities of the moulded composite specimens indicated a law of mixtures relationship; whereas those with machined edges differed significantly.

Moisture-induced deterioration of tensile strength was most severe up to 1.5% and 3% by weight moisture contents for the glass-fibre containing and unfilled polyamide 6,6, respectively. Moisture ingress, as would be expected, resulted in increased elongations to failure for the unfilled polymer but caused almost no variation in the elongation behaviour of the reinforced polymer.

Get full access to this article

View all access options for this article.

References

Puffr

and Sebenda

, “On the Structure and Properties of Polyamides: The Mechanism of Water Sorption in Polyamides”, J Polym Sri: part C, 16 (1967), 79–93.

Kohan

M.I.

(Ed.), Nylon Plastics, Wiley-Intersrience Publication, New York, (1973), Ch. 10.

Starkweather

H. W.

Jr. , “Water in Nylon”, in Water in Polymers (Ed. Rowland

S.P.

), ACS (American Chem. Soc.) Symposium Series 127, ACS, Washington, DC, (1980).

Pai

C-C.

, Jeng

R-J.

, Grossman

S.J.

and Huang

J-C.

, “Effects of Moisture on Thermal and Mechanical Properties of Nylon - 6, 6”, Advances in Polymer Technology, 9, (1989), 157–163.

Kohan

M.I.

(Ed.), Nylon Plastics, Wiley-Interscience Publication, New York, (1973), Ch. 17.

Hunt

D.G.

, “Prediction of sorption and diffusion of water vapour by nylon - 6, 6”, Polymer, 21, (1980), 495–501.

Bretz

P.E.

, Hertzberg

R.W.

, Manson

J.A.

and Ramirez

, “Effect of Moisture on Fatigue Crack Propagation in Nylon 66”, in Water in Polymers (Ed. Rowland

S.P.

), ACS (American Chem. Soc.) Symposium Series 127, ACS, Washington, DC, (1980).

Auerbach

and Carnicom

M.L

, “Sorption of Water by Nylon 66 and Kevlar 29. Equilibria and Kinetics”, J. Appl. Polym. Sci., 42, (1991), 2417–2427.

Ishak

Z.A.M.

and Berry

J.P.

, “The Effect of Hygrothermal Ageing on the Dynamic Mechanical Properties of Nylon 6,6 Composites”, Proceedings of the 2nd International Conference on Deformation and Fracture of Composites by the Institute of Materials, Manchester, UK, March (1993).

10.

Valentin

, Paray

and Guetta

, “The hygrothermal behaviour of glass fibre reinforced PA66 composites: a study of the effect of water absorption on theirmechanical properties,” J. Mater. Sci., 22, (1987), 46–56.

11.

Shen

C-H.

, and Springer

G.S.

, “Moisture Absorption and Desorption of Composite Materials”, J. Composite Materials, 10, (1976), 2–20.

12.

Bert

C.W.

and Kline

R.A.

, “Composite Materials Mechanics: Properties of Planar-Random Fiber Composites”, Polymer Composites, 6, (1985), 133–141.

13.

Akay

and Barkley

, “Fibre orientation and mechanical behaviour in reinforced thermoplastic injection mouldings”, J. Mater. Sci., 26, (1991), 2731–2742.

14.

O'Regan

and Akay

, “The Distribution of fibre lengths in Injection Moulded Polyamide Composite Components”, Proceedings of the Intermational Conference on Advances in Materials and Processing Technologies (AMPT '93) (Ed. Hashmi

M.S.J.

), Dublin City University, (August 1993).

15.

Akay

and Barkley

, “Pitfalls in the Evaluation of Impact Fracture of Polymer-based Materials”, Polymer Testing, 7, (1987), 391–404.

16.

Reimschuessel

H.K.

, “Relationships on the Effect of Water on Glass Transition Temperature and Young's Modulus of Nylon 6”, J. Polym. Sri. Polym. Chem. edition, 16, (1978), 1229–1236.

17.

Akay

and Barkley

, “Flow-aberrations and weld lines in glass-fibre reinforced thermoplastic injection mouldings”, Plastics, Rubber and Composites Processing and Applications, 20 (1993), 137–149.