This work presents the development of a building energy code (BEC) of Thailand compliance framework during conceptual design stages (CDS) using building information modeling (BIM) through visual programming language (VPL). The proposed method included five steps: (i) establish a commercial building reference; (ii) develop a BIM base model; (iii) create a BIM overall thermal transfer value (OTTV) and roof thermal transfer value (RTTV) calculation model with VPL scripts; (iv) test the BIM framework with various scenarios; and (v) verify the results with Thailand BEC software. The findings revealed an insignificant difference between the results from the BIM calculation model and those estimated by the Thailand BEC software. This study demonstrated that using BIM with VPL for OTTV and RTTV calculations during the CDS may be implemented automatically, which could help designers make timely decisions to comply with Thailand’s BEC, considering building design, materials, and fenestration ratios.
LimY-WSeghierTEHarunMF, et al.Computational BIM for building envelope sustainability optimization. MATEC Web Conf2019; 278: 04001.
2.
SinghpooCPunnucharoenwongNBenjapiyapornC. Study of the effect of temperature differences on the overall thermal transfer value of buildings. Energy Proc2015; 79: 348–353.
3.
ChanALSChowTT. Calculation of overall thermal transfer value (OTTV) for commercial buildings constructed with naturally ventilated double skin façade in subtropical Hong Kong. Undefined2014; 69: 14–21.
4.
ChanALSChowTT. Evaluation of Overall Thermal Transfer Value (OTTV) for commercial buildings constructed with green roof. Appl Energy2013; 107: 10–24.
5.
ChowWKChanKT. Overall thermal transfer values for building envelopes in Hong Kong. Appl Energy1992; 42: 289–312.
6.
ChirarattananonSTaveekunJ. An OTTV-based energy estimation model for commercial buildings in Thailand. Energy Build2004; 36: 680–689.
7.
NatephraWYabukiNFukudaT. Optimizing the evaluation of building envelope design for thermal performance using a BIM-based overall thermal transfer value calculation. Build Environ2018; 136: 128–145.
8.
ChuaKJChouSK. Energy performance of residential buildings in Singapore. Energy2010; 35: 667–678.
AbassFIsmailLHWahabIA, et al.Development of a model for OTTV and RTTV based on BIMVPL to optimize the envelope thermal performance. IOP Conf Ser Mater Sci Eng2020; 713: 012009.
11.
SeghierTELimY-WHarunMF, et al.BIM-based retrofit method (RBIM) for building envelope thermal performance optimization. Energy Build2022; 256: 111693.
12.
Department of Alternative Energy Development and Efficiency. Ministry of energy’s notification on criteria and calculation methods for building design of various systems, overall energy consumption of buildings and use of renewable energy of various building systems B.E. https://www2.dede.go.th/ (2009), accessed 25 April 2024.2552.
13.
LiLSunWHuW, et al.Impact of natural and social environmental factors on building energy consumption: based on bibliometrics. J Build Eng2021; 37: 102136.
14.
OmerAM. Energy use and environmental impacts: a general review. J Renew Sustain Energy2009; 1: 053101.
15.
Olu-AjayiRAlakaHSulaimonI, et al.Building energy consumption prediction for residential buildings using deep learning and other machine learning techniques. J Build Eng2022; 45: 103406.
16.
ChuaKJChouSKYangWM, et al.Achieving better energy-efficient air conditioning – a review of technologies and strategies. Appl Energy2013; 104: 87–104.
17.
ChenBLiuQChenH, et al.Multiobjective optimization of building energy consumption based on BIM-DB and LSSVM-NSGA-II. J Clean Prod2021; 294: 126153.
18.
WangYWeiC. Design optimization of office building envelope based on quantum genetic algorithm for energy conservation. J Build Eng2021; 35: 102048.
19.
JalaeiFJradeA. Integrating building information modeling (BIM) and LEED system at the conceptual design stage of sustainable buildings. Sustain Cities Soc2015; 18: 95–107.
20.
SeghierTELimYWAhmadMH, et al.Building envelope thermal performance assessment using visual programming and BIM, based on ETTV requirement of green Mark and GreenRE. IJESD2017; 4. DOI: 10.11113/IJBES.V4.N3.216.
21.
ASHRAE. American society of heating, refrigerating and air-conditioning engineers. 1979. Epub ahead of print 1979. DOI: 10.1016/0140-7007(79)90114-2.
22.
ElbeltagiEWefkiHAbdrabouS, et al.Visualized strategy for predicting buildings energy consumption during early design stage using parametric analysis. J Build Eng2017; 13: 127–136.
ChaseSC. Generative design tools for novice designers: issues for selection. Autom Constr2005; 14: 689–698.
25.
KensekK. Visual programming for building information modeling: energy and shading analysis case studies. Journal of Green Building2015; 10: 28–43.
26.
Rahmani AslMZarrinmehrSBerginM, et al.BPOpt: a framework for BIM-based performance optimization. Energy Build2015; 108: 401–412.
27.
ChenZHammadAWAKamardeenI, et al.Optimising embodied energy and thermal performance of thermal insulation in building envelopes via an automated building information modelling (BIM) tool. Buildings2020; 10: 218.
28.
ReevesTOlbinaSIssaRRA. Guidelines for using building information modeling for energy analysis of buildings. Buildings2015; 5: 1361–1388.
29.
CavieresAGentryRAl-HaddadT. Knowledge-based parametric tools for concrete masonry walls: conceptual design and preliminary structural analysis. Autom Constr2011; 20: 716–728.
30.
JinRZhongBMaL, et al.Integrating BIM with building performance analysis in project life-cycle. Autom Constr2019; 106: 102861.
31.
CatalinaTVirgoneJIordacheV. Study on the impact of the building form on the energy consumption. In: Proceedings of Building Simulation 2011: 12th Conference of International Building Performance Simulation Association, Sydney, Australia, 14–16 November 2011, 2011; 1726–1729.
32.
LiuZWangQGanVJL, et al.Envelope thermal performance analysis based on building information model (BIM) cloud platform—proposed green Mark collaboration environment. Energies2020; 13: 586.
