Material and Structural Aspects of Composite Materials for Light Rail Vehicle Tracks

Robinson A.M. and Bridge 1, “Integrated Composite Tracks - Feasibility Study”, DT1/Report ATP ENTRAIN, 1992

Walton J. and Young C. , “Composites Take the Strain”, Advanced Composites Engineering, September 1987, 19–21

Snook S. , “Pultrusion - Pulling Power, Advanced Composites Engineering, November 4-5 1992

Stanley J.M. and Matto W.M. , “Case A History Approach to Demonstrating Pultrusion Design Versatility”, 41st Annual Conference, Reinforced Plastics/Composites Institute, The Society of the Plastics Industry, Inc., January 27-31 1986, Session 6B 1–5

Werner R.I. , “Pultrusion Process Engineering - Where Are We Headed”?, 39th Annual Conference, Reinforced Plastics/Composites Institute, The Society of the Plastics Industry, Inc., January 16-19 1984, Session 1C 1–8

Werner R.I. , Proc. 38th Ann. Conf. RP/Clnst., Soc. Plast. Ind., 8G, 1983

Sumerak J.E. , Proc. 39th Ann. Conf. RP/C. Inst., Soc. Plast. Ind., 1984, 1B

Han C.D. , Lee D.S. and Chin H.B. , Proc. 40th Ann. Conf. RP/Inst C., Soc. Plast. Ind., 1985, 2F

Outerwater J.O. , “On the Mechanics of Pultrusions”, Proc. 41st Ann. Conf. RP/Inst C., Soc. Plast. Ind., January 27-31 1986, 6C

Martin J. and Sumerak J. , “A Review of the Market for Pultruded Applications - and Factors Affecting its Growth”, Proc. 38th Ann. Conf. RP/Inst C., Soc. Plast. Ind., February 7-11 1983, 6-F

Taylor E. , “Bring in the Reinforcements”, Advanced Composites Engineering, January 17-19 1990

Sumerak J.E. and Martin J.D. , “Property Maximization of Tubular Pultrusions via Materials Orientation and Processing Selection”, 43rd Ann. Conf., Comp. Inst., Soc. Plast. Ind., February 1-5 1988, 2C

Harvey J.S. , “Pultrusion - A Review”, 36th Int. SAMPE Symp. April 15-18 1991, 1302

Spencer R.A.P. , “Advances in Pultrusion of carbon Fibre Composites”, Int. Conf, on Carbon Fibres, Paper No. 21, Plast. Inst., February 1974

Smith M. and Ishida H. , “Development of Epoxy Composites by RIM-Pultrusion”, Proc. Conf. High Temp. Polymers and their Uses, Cleveland, 1989, 274

Long E.R. Jr. , Long S.A.T. , Collins W.D. , Gray S.L. and Funk J.G. , “Effects of Postcuring on Mechanical Properties of Pultruded Fibre - Reinforced Epoxy Composites and the Neat Resin”, SAMPE, 20, 3, 1989, 9

Tessier N.J. , Kiernan D. , Madenjian A. and Moulder G. , “Ultrasonic Enhancement of Epoxy Pultrusions”, Proc. 41st Ann. Conf. RP/Inst C., Soc. Plast. Ind., January 27-31, 1986, 1A

Anon, “Transferring the Power”, Advanced Composites Engineering, June 11 1989

Boukhili R. , Hubert P. and Gauvin R. , “Loading Rate Effect as a Function of the Span-to-Death Ratio in Three-Point Bend Testing of Unidirectional Pultruded Composites”, Composites, 22, 1, 1991, 39–45

Hunter G.A. , “Pultruding epoxy resin”, Proc. 43rd Ann. Conf., Comp. Inst., Soc. Plast. Ind., Feb. 1-5 1988, 6-C

Kershaw J.A. , “New Epoxy Resin Systems for Pultrusion”, Proc. 39th Ann. Conf. RP/Inst C., Soc. Plast. Ind., February 7-11 1983, 6C

Wilson M.L. , Johnson G.S. and MacConochie , “Comparison A of Flexural Properties of Aramid Reinforced Pultrusions Having Constant Fibre Volume and Varied Matrices, Pretreatments and Postcures”, Proc. 41st Ann. Conf., RP/Inst C., Soc. Plast. Ind., January 27-31 1986, 1-E

Kiernan D. , Tesier N. and Schott N. , “Modification of Epoxy Resins for Improved Pultrusion Processing”, Proc. 40th Ann. Conf. RP/Inst C., Soc. Plast. Ind., January 28-February 1 1985, 2-G

Breitigam W.V. and Ubrich W.P. , “High Performance Epoxy Resin Systems for Pultrusion”, Proc. 35th Inst. SAMPLE Symp., April 25 1990, 796–809

Rich M. J. and Drzal L.T. , “Interfacial Properties of Some High- Strain Carbon Fibres in an Epoxy Matrix”, Proc. 41st Ann. Conf., RP/Inst C., Soc. of Plast. Ind., January 27-31 1986, 2-F

Anderson R.A. , “All Pultruded Fibreglass is NOT Created Equal”, Proc. 41st Ann. Conf., RP/Inst C., Soc. Plast. Ind., January 27-31 1986, 6-A

Hager T.P. , “Epoxy/Polyester Compatible Glass Fibre Yarns in Structural Braiding”, Proc. 43rd Ann. Conf., Comp. Inst., Soc. Plast. Ind., February 1-5 1988, 9-A

Hollaway L. , “A Review of the Structural Uses of Pultruded Sections with Special References to a Three Way Single Layer Skeletal System”, Proc. 15th Reinf. Plast. Congress, Nottingham 1986,117

Sim G.D. , Johnson A.F. and Hill R.D. , “Mechanical and Structural properties of GRP Pultruded Section”, Composite Struct. 8, 1987, 173

Bank L.C. , “Flexural and Shear Moduli of Full-Section Fibre Reinforced Plastic (FRP) Pultruded Beams”, J. Testing and Evaluation, 17, 1, 1989, 40

King T.R. , Blackketter D.M. , Walrath D.E. and Adams D.F. , “Micromechanics Prediction of the Shear Strength of Carbon Fibre/ Epoxy Matrix Composite: The Influences of the Matrix and Interface Strengths”, J. Comp. Mater., 26, 4, 1992, 558

Anon, “Pultruded Composites: the Alternative Structural Material”, Engng. Mater. Design, October 1987, 54

Diamantakos C. and Fritz R.J. , “Tensile Fatigue of Notched Carbon/ Epoxy Specimens, Search for Optimum Model”, Proc. 41st Ann. Conf., RP/Inst C., Soc. Plast. Ind., January 27-31 1986, 25-D

Curtis P.T. , “A Review of the Fatigue of Composite Materials”, Tech. Rep. 82031, RAE, Farnborough UK, 1987

Curtis P.T. and Dorey G. , “Fatigue of Composite Materials”, Proc. Int. Mech. Eng. G, J. Aerosp. Eng., 203, 1989, 31–37

Branco C.M. , Ferreira J. M. , Richardson M.O.W. and Fael P. , “Fatigue Behaviour of a Phenol Matrix Composite”, Int. J. Fatigue, 14, 6, 1992, 367

Lewis G. , “Some Correlates of the Tribological Performance of Composite Materials”, Proc. 41st Ann. Conf., RP/Inst C., Soc. Plast. Ind., January 27-31 1986, 25-E

Giltrow J.P. and Lancaster J.K. , Wear, 16, 1970, 359

Suh H.P. , Wear, 25, 1973, 111

Anon, “Composites Take to the Slopes”, Advanced Composites Engineering, 1988, 8

Silsby P.K.J. , Personal Communication, Director and General Manager, Watts Urethane Products, Glos., 1992