Thermo-oxidative Degradation and Stabilisation of Rubber Materials: New Techniques Used to Assess Ageing and to Modify Rubber Surfaces in Order to Enhance the Durability towards Oxidation
Restricted accessResearch articleFirst published online February, 1993
Thermo-oxidative Degradation and Stabilisation of Rubber Materials: New Techniques Used to Assess Ageing and to Modify Rubber Surfaces in Order to Enhance the Durability towards Oxidation
Thermo-oxidative degradation of rubber materials often determines the lifetime of rubber products. An understanding of fundamental aspects of oxidative ageing is therefore of great importance. This review discusses the ageing of thick-walled rubber materials according to results from tests of oxidative durability of NR and EPDM using novel analytical techniques, e.g. ATR-FTIR (reflection infrared spectroscopy), CL (chemiluminescence), CT (computed X- ray tomography scanning), MP (modulus profiling) and measurements of electrical conductivity. Ageing is shown to be concentrated in the surface region according to diffusion-limited oxidation expectations. The results suggest an attempt to stabilize rubber materials using surface modification techniques as an alternative to stabilization by using antioxidants. Suitable surface modification techniques, e.g. plasma polymerization and photografting, are presented with an appropriate choice of monomers. It is shown that acrylic acid is a monomer with great a potential for creating surface layers with a low permeation rate for oxygen.
Get full access to this article
View all access options for this article.
References
1.
WeiningerS.J. and StermitzF.R., Chap. 5, in “Organic Chemistry”, Academic Press Inc., Orlando, 1984
2.
CareyF.A. and SundbergR.J., Chap. 10, in “Advanced Organic Chemistry”, Part B, Plenum Press, New York, 1983
3.
LenzR.W., “Organic Chemistry of High Polymers”, Wiley- Interscience, New York, 1967
4.
BillinghamN.C. and CalvertP.D., Chap 5, in “Developments in Polymer Stabilization - 3”, ScottG. (ed.), Appl. Sci. Publ., London, 1980
5.
ReichL. and StivalaS.S., “Autoxidation of hydrocarbons and polyolefins”, Marcel Dekker Inc., New York, 1969
6.
KamiyaY.NikiE., “Oxidative Degradation”, Ch. 3 in “Aspects of Degradation and Stabilization of Polymers”, H. Jellinek H.G. (Ed.), Elsevier Scientic Publ. Co., Amsterdam, 1978
7.
SheltonJ.R., Rubber Chem. Technol, 56, 1983, G71
8.
Geukens and Kabamba, Polym. Deg. Stab., 4, 1982, 69
9.
Abu-ZeidM.E., YoussefY.A. and Abdul-RasoulF.A., J. Appl. Polym. Sci., 32, 1986, 3345
10.
BrydsonJ.A., “Reactivity of Diene Rubbers - Ill: Oxidation and Related Processes”, Chap. 9 in “Rubber Chemistry”, Appl. Sci. Publ., Essex, 1978
11.
HolmstromA. and SorvikE.M., J. Polym. Chem., 16, 1978,2555
12.
BairH.E., Chap 9, in “Thermal Characterisation of Polymeric Materials”, TuriA. (ed.), Academic Press, New York, 1981
13.
StenbergB. and BjorkF., J. Appl. Polym. Sci., 31, 1986, 487
14.
A1-MalaikaS., “Effects of Antioxidants and Stabilizers”, Chap. 19 in “Comprehensive Polymer Science, Vol. 6, Polymer Reactions”, AllenG. (ed.), Pergamon Press, Exeter, 1989
15.
BevilacquaE.M., J. Am. Chem. Soc., 81, 1959, 5071
16.
ScottG., Chap 6, in “Developments in Polymer Stabilistion-4”, ScottG. (ed.), Appl. Sci. Publ., Essex, 1981
17.
ScottG., Chap. 9, in “Developments i Polymer Stabilisation-1”, ScottG. (ed.), Appl. Sci. Publ., Essex, 1979
18.
BarnardD. and LewisP.M., Chap. 13, in “Natural Rubber Science and Technology”, RobertsA.D. (ed.), Oxford University Press, New York, 1988
19.
AllmerK., HultA. and RanbyB., J. Polym. Sci., Polym. Chem., 27, 1989, 1641
20.
AllmerK., HultA. and RanbyB., J. Polym. Sci., Polym. Chem., 27, 1989, 3405
21.
StenbergB., ShurY. J. and JanssonJ.F., J. Appl. Polym. Sci., 35, 1979, 511
22.
CloughR.L. and GillenK.T., Polymer Deg. Stab., 38, 1992, 47
23.
MattsonB. and StenbergB., “Surface Modification and Stabilization of Rubber Materials - Plasma Polymerization and Photografting”, J. Appl. Polym. Sci., Submitted, 1992
24.
CloughR.L. and GillenK.T., Polym. Mat. Sci. Eng., 58, 1988, 209
GellingI.R. and PorterM., Chap 10, in “Natural Rubber Science and Technology”, RobertsA.D. (ed.), Oxford University Press, New York, 1988
29.
FarberM., Rubber Chem. Technol., 2, 1989, G47
30.
BevilacquaE.M., Rubber Age, 80, 1956, 271
31.
BarnardD., CainM.E., CunneenJ.I. and HousemanT.H., Bevilaqua Memorial issue of Rubber Chem. Technol., Vol. 45, No. 2, 1972
32.
MorandJ.L., Rubber Chem. Technol., 50, 1977, 373
33.
RobertsA.D. (ed.), “Natural Rubber Science and Technology”, Oxford University Press, New York, 1988
34.
MattsonB. and StenbergB., Rubber Chem. Technol., 65, 1992, 315
35.
MattsonB., ReitbergerT., StenbergB. and TerseliusB., Polym. Test., 10, 1991, 399
36.
MattsonB., KronA., ReitbergerT., CraigA. and FlemingR., “Imaging Chemiluminescence Analysis - Instrumentation and Applications”, Polym. Test., 11, 1992, 357
37.
MattsonB., GillenK.T., OstmanE. and StenbergB., “Novel Techniques used to assess the ageing of carbon black filled materials”, Polym. Deg. Stab., in press, 1992
MattsonB. and StenbergB., Kaut. Gummi Kunst., No.2, 1992, 116
40.
GeorgeG.A., Use of Chemiluminescence to Study the Kinetics of Oxidation of Solid Polymers, in “Develop. Polym. Degrad”, GrassieN., (ed.), Applied Science Publishers, London, Vol. 3, 1981, 173
41.
ZlatkevichL. (ed.), in “Luminescence Techniques in Solid-State Polymer Research”, Marcel Dekker, New York, 1989
42.
AshbyG.E., J. Polymer Sci., 50, 1961, 99
43.
BillinghamN.C., O'KeefeE.S., and ThenE.T.H., Proc. 12th Ann. Conf. Adv. Stab. Cont. Polym. Degrad., Lucerne, 1990
