A Review of Polymer Injection Moulding Processes

Crawford R.J. , Plastic Engineering, 2nd edition, Pergamon Press, 1987

Toor H.L. , A survey of the injection moulding cycle from an energy view point, Brit. Plast., 27, 1954, 318

Eagleton S.D. , Pressure effects during injection moulding of polystyrene, Brit. Plast., 27, 1954, 95

Staub R.B. , How to get best performance in screw injection moulding, SPE J., Nov. 1963, 1182–6

Donovan R.C. , Thomas D.E. and Leversen L.D. , An experimental study of plasticating in a reciprocating screw injection machine, Polym. Eng. Sci., 11, 1971, 353

Donovan R.C. , A theoretical melting model for a reciprocating screwinjection moulding machine, Polym. Eng. and Sci., 11, 1971, 361

Donovan R.C. , The plasticating process in injection moulding, Polym. Eng. and Sci., 14, 1974,101

Nunn R.E. and Fenner R.T. , Reciprocating-screw plastication, 36th ANTEC of SPE, 1978, 27

Chandra R.S. , Direct melt temperature control in injection moulding, SPE 30th ANTEC conferences, May 1972, 831–36

Jensen M. , Loughborough University, Ph D thesis, 1980

Kamal M.R. and Kenig S. , The injection molding of thermoplastics, part 1: Theoretical model, Polym. Eng. and Sci., 12, 1972, No. 4, 294–308

Han D.C. , Rheology in polymer processing, Academic Press, New York, 1976

Kenig S. and Kamal M.R. , Cooling molded parts. A rigorous analysis, SPE J., 26, 1970, 50–57

Craig J.E and Miller P.P. , Mould temperature control, Plast. and Rubb. Process., March 1979, 33–36

Kosel U.M. , A novel concept of single-screw extrusion, Plast. and Polym., Oct. 1971, 319–27

Tadmor Z. and Klein I. , Design of certain fluted mixing sections of extruder screws, Polym. Eng. and Sci., 13, 1973, No. 5, 382–89

Tadmor Z. and Gogos C. , Principles of polymer processing, John Wiley & Sons Inc., 1979

McKelvey J.M. , Mixing in polymer processing, John Wiley & Sons Inc., 1962

Schneider K. , Effect of feed zone upon the output characteristics of a single screw extruder, Kunststoffe, 59, 1969, 757–60

Chung C.I. , New ideas about solid conveying in screw extruders, SPE J., 26, May 1970, 32

Broyer E. and Tadmor Z. , Solid-conveying in screw extruder, part 1: A modified isothermal model, Polym. Eng. and Sci., 12, 1972, 12–24

Franzkoch B. and Menges G. , Grooved forcer feeding zone can improve extruder performance, Plast. Eng., July, 1978, 51–54

McKelvey J.M. and Steingister S. , Improved processing with me- tered-starved feeding of extruder, Plast. Eng., June 1978, 45–49

Lovegrove J.G.A. , The importance of the feeding zone, Plast. and Rubb. process., Dec. 1979, 125–8

Maddock B.H. , A visual analysis of flow and mixing in extruder screws, SPE J., May 1959, 383

Street L.F. , Plastifying extrusion, Int. Plast. Eng., 1, 1961, 289

Tadmor Z. , Fundamental of plasticating extrusion. part 1: A theoretical model for melting, Polym. Eng. and Sci., 6, 1966, 185–90

Housz J.F.I. and Meijer H.E.H. , Screw design and melting performance in single screw extruders, Practical rheology in polymer processing, International Conference, Loughborough, Sept. 1979

Chung C. , A new theory for single-screw extrusion. part 1, Modern Plast., 45, 1968,178-98

Mohr W.D. , Saxton R.L and Jepson C.H. , Theory of mixing in the single-screw extruder, Ind. and Eng. Chemistry, 49, 1957, No. 11, 1857–62

Pinto G. and Tadmor Z. , Mixing and residence time distribution in melt screw extruder, Polym. Eng. and Sci., 10, 1970, No. 5, 279–88

Maddock H.B. , An improved mixing-screw design, SPE J., July 1967, 23–29

Erwin L. , New fundamental considerations on mixing in laminar flow, 36th ANTEC of SPE, 24, 1978, 488–93

Erwin L. , Theory of mixing sections in single screw extruder, Polym. Eng. and Sci.,18, 1978, No. 7, 572–76

Ng Y.K. and Erwin L. , Illustrations of mixing in laminar flow, 37th ANTEC of SPE, 1979, 241–44

Shah M. and Erwin L. , Experiments in extruder mixing, Int. Conference on reaction processing, Pittsburgh PA, 1980, 1–14

Bigio D.I. , Boyd J. D. , Erwin L. and Gailus D.W. , Mixing studies in the single screw extruder, Polym. Eng. and Sci., 25, 1985, No. 5, 305–10

Cheng Y.C. , High speed mixing and extrusion, 34th ANTEC of SPE, 1976, 358–60

Nunn E.R. and Bell J. , Application of double wave screws in injection moulding, Injection moulding productivity through technology, technical conference, Columbus, Oct. 1981, 23–32

Lin S.Y. and Bevis M. J. , The application of the cavity transfer mixer in injection moulding, part 1: Analysis of machine performance, Plast. and Rubb. Process, and Appl., 7, 1987, No. l, 29–41

Verbraak C.M. and Meijer H.E.H. , Screw design in injection molding, Polym. Eng. and Sci., 29, 1989, No. 7, 479–87

Lounsbury D. , Innovation in injection moulding, Society of plastics engineer, Technical conference, Oct. 1983

Barr R. , Design of screws for mixing on injection moulding machine, The Plastic and Rubber Ins., Polymer processing machinery, Int. conference Bradford University, July 1985

Danckwerts P.V. , The definition and measurement of some characteristics of mixtures, Appl. Sci. Res., 1952, Sec. A3, 279–96

Bigg D.M. , On mixing in polymer flow systems, Polym. Eng. and Sci.,15, 1975, No. 9, 684–89

Wolf D. and White D. , Experimental study of the residence time distribution in plasticating screw extruders, AICHE J., 22, 1976, No. 1, 122–131

Edwards M.F. , Gokbora M.N. and Zayadine K.Y. , Mixing studies using a split barrel extruder, Polymer extrusion II conference, London, 1982.

Edwards M.F. and Shales R.W. , Mixing processes in single screw extruders, I. Chem. E. Symposium Series No. 94, London April, 1985

Lindor G. and Tadmor Z. , Theoretical analysis of residence time distribution functions of strain distribution functions in plasticating screw extruder, Polym. Eng. and Sci., 16, 1976, 450–462

Gilmore G.D. and Spencer R.S. , Role of pressure, Temperature, and Time in the injection moulding process, Modem plastics, April, 1950 143–228

Staub R.B , An analysis of injection mould ing of polyethylene, SPE J., 16, 1960, No.4, 429

Barrie I.T. , An application of rheology to the injection mouldingof large-area articles, Plast. and Polym., 38, 1970, 47.51

Thomas D.P. and Hagan R.S. , The influence of molecular weight distribution on melt viscosity, melt elasticity, processing behavior and properties of polystyrene, Polym. Eng and Sci, 9, 1969, No. 3, 164–171

Thomas D.P. , The influence of molecular weight on the melt rheology of polypropylene, Polym. Eng. and Sci., 11, 1971, No. 4, 305–11

Struik L.C.E. , Orientation effects and cooling stresses in amorphous polymers, Polym. Eng. and Sci., 18, 1978, No. 10, 799–811

Ballman R.L. and Toor H.L. , Orientation in injection molding, Modem Plast., Oct., 1960,133-124

Harland W.H. , Kantas P. and Habipis T. , Orientation in injection moulding, Plast. and Rubb. Process., June, 1980, 65–7

Kubat J. , and Rigdahl M. , Influence of high injection pressures on the internal stress level in injection moulded specimens, Polym. 16, 1975, 925–929

Haworth B. , Hindle C.S. , Sandilands G. J. and White J.R., Assessment of internal stresses in injection-moulded thermoplastics, Plast and Rubb. Process and Appl., 2, 1982, No.l, 59–71

Isayev A.I. and Crouthamel D.L. , Residual stress development in the injection molding of polymers, Polym. Plast. Technol. Eng., 22, 1984, 177–232