Crosslinking Agents in Ethylene-Propylene Rubbers

Samuels M.E. and Wirth K.H. , Rubber Age, 99, No. 9, 1967, p. 73

Wirth K.H. , Rubber World, 158, No. 2, 1968, p. 61

Natta G. ., ‘Ethylene-Propylene Rubbers’, in Kennedy J.R. , Tornquist E. (Ed.), ‘Polymer Chemistry of Synthetic Elastomers’, Interscience Publ., Vol. 2, 1969, pp. 679–702.

Baldwin F.P. and Ver Strate G. , Rubber Chem. Technol., 45, 1972, pp. 709–781. (1325 references)

Borg E.L. , ‘Ethylene-Propylene Rubber’, in Morton M. (Ed.), ‘Rubber Technology’, 2. Ed., Publ. van Nostrand Reinhold, 1973

Harper C.A. , ‘Handbook of Plastics and Elastomeres’, Publ. McGraw-Hill, 1975

Casper R. and Witte J.H. , ‘Synthetic Rubber’, in Ullmanns Encyclopadie der technischen Chemie, 4, Aufl., Verlag Chemie, Weinheim, Vol. 13, 1977, pp. 619–621.

Samuels M.E. , ‘Ethylene-Propylene Rubbers’, in Rabbit R.O. (Ed.), The Vanderbilt Handbook’, 1978, pp. 147–168.

‘Elastomers based on Ethylene-Propylene’, Green Book No. 39, Publ. Wd K, 1979, p. 211 (863 references)

Hofmann W. , ‘Rubber Technology’, Publ. Gentner-Verlag, 1980, pp. 149–158.

Kleemann W. , ‘Mixes for the Rubber Industry’, Publ. VEB-Deutscher Verlag fur Grundstoffindustrie, Leipzig, 1982, pp. 105–108.

Blow CM. and Hepburn C. (Ed.), ‘Rubber Technology and Manufacture’, 2nd Ed., Publ. Butterworth Science, 1982, pp. 108–113.

US 3,300,459, Montecatini, 1955

Hofmann W. , Kunstst., 74, 1984, p. 610

‘Montepolimeri and other Producers of EP Elastomers’, 1983, Lists of EPM and EPDM types, Montepolimeri brochure

Hofmann W. , ‘Vulcanisation and Vulcanising Agents’, Publ. Berliner Union, 1965, pp. 257–260. (over 100 references)

Ref. 9, p. 3f and p. 55f

Kuhne J.K. and Kantt J. , Kautschuk u. Gummi, Kunstst., 37, 1984, p. 101

Mazzanti G. ., Chim. Ind. (Milan), 39, 1957, p. 825

Natta G. ., Chim. Ind. (Milan), 40, 1958, p. 717

Marconi W. ., Chim. Ind. (Milan), 46, 1964, p. 1131

Natta G. ., J. Polym. Sci., 51, 1960, p. 411

Mazzanti G. ., Chim. Ind. (Milan), 39, 1957, p. 743

Bushick R.D. , J. Polym. Sci. A, 3, 1965, p. 2047

Natta G. ., Chim. Ind. (Milan), 40, 1958, p. 896

Ref. 9, pp. 5–7

Gumboldt A. ., Makromol. Chem., 101, 1966, p. 229

Charlesby A. , ‘Atomic Radiation and Polymers’, Publ. Pergamon Press, 1960

Chapiro A. , ‘Radiation Chemistry of Polymeric Systems’, Intersciene Publ., 1962

Bolt R.O. and Carroll J.G. , ‘Radiation Effects on Organic Materials’, Publ. Academic Press, 1963

Natta G. ., Rubber Plast. Age, 42, 1961, p. 53

Natta G. ., Kautsch. u. Gummi, Kunstst., 14, 1961, p. 54

Ceresa R.J. , Rubber Plast. Age, 42, 1961, p. 1210

Amberg L.O. and Robinson A.E. , Rubber Plast. Age, 42, 1961, p. 875

Di Giulio E. , and Ballini G. , Kautsch. u. Gummi, Kunstst., 15, 1962, p. 6

Kelly R.J. ., Rubber Chem. Technol., 35, 1968, p. 1101

Eby L.T. and Fusco J.V. , Rubber Age, 91, 1962, p. 949

Hassan A.M. and Ray L.N. , J. Appl. Polym. Sci., 15, 1971, p. 145

Gaylord N.G. , J. Polym. Sci., 23, 1956, p. 71

Cornell J.A. ., Rubber Chem. Technol., 43, 1971, p. 613

Imoto M. ., Nippon Gumi Kyokaishi, 41, 1968, p. 435

Encyclopaedia of Polymer Science and Technology, 4, 1966, p. 332

Loan L.D. , Rubber Chem. Technol., 40, 1967, p. 149

Endstra W.C. , Kautsch. u. Gummi, Kunstst., 32, 1979, p. 756

Ref. 9, pp. 44ff

Kerrut G. , Kautsch. u. Gummi, Kunstst., 22, 1969, p. 413

Kerrut G. , Kautsch. u. Gummi, Kunstst., 26, 1973, p. 341

Mitra A. , and Das C.K. , Kautsch. u. Gummi, Kunstst., 37, 1984, p. 862

Natta G. ., 4th IRI Rubber Technol. Conf., May 1962, Preprint 43

Roche I.D. , Rubber Age, 91, 1962, p. 969

Pyne J.R. , India Rubber Bull., 230, 1968, p. 8

Mitchell J.M. ., Rubber Age, 93, 1963, p. 921

Stemmer H.D. , Kautsch. u. Gummi, Kunstst., 16, 1963, p. 660

Stemmer H.D. , Kautsch. u. Gummi, Kunstst., 21, 1968, p. 615

Crespi G. and Arozzi A. , Chim. Ind. (Milan), 46, 1964, p. 151

Wolfe J.R. Jr , and Albin R.J. , Rubber Chem. Technol., 37, 1964, p. 927

Wolfe J.R. , Jr., J. Appl. Polym. Sci., 12, 1968, p. 1167–1183

Colelough T. , Rev. Gen. Caout. Plast., 45* 1968, p. 439

Colelough T. , India Rubber Bull., 232, 1968, p. 5

Ghio M. , Ind. Gomma, 12, 1968, p. 43

Saegebarth K.A. , Angew. Makromol. Chem., 4/5, 1968, p. 65

Fujimoto K. and Nakada S. , J. Appl. Polym. Sci., 13, 1969, p. 1509

Imoto M. ., Nippon Gomu Kyokaishi, 42, 1969, p. 921

Hayashi J. ., Nippon Gomu Kyokaishi, 43, 1970, p. 358

Ghetti G. ., Chim. Ind. (Milan), 51, 1969, p. 1361

Orszagh A. ., Plaste u Kaut., 17, 1970, p. 489

Sicron J.K. , Rubber World, 149, 1963, p. 58

Gridunov I.T. ., Kauch. i. Rezina, 27, 1968, p. 22

Teucher K. ., Khim. Ind. (Sofia), 39, 1967, p. 107

Loan L.D. , J. Polym. Sci. A, 2, 1964, p. 3053

Private Comm. from Polysar Technical Service Center, Antwerp

Fujimoto K. and Wataya K. , J. Appl. Polym. Sci., 13, 1969, p. 2513

Elias H.-G. , ‘Macromolecules; structure, properties and materials for synthesis’, Publ. Huthig & Wepf, 3rd Ed., 1975

Recchuite A.D. and Dimeler G.R. , ‘Petroleum Extender Oils for Reduced Peroxide Consumption in Compounded EPDM’, Proc. ACS Rubber Chem. Division, May 1983, Paper 36

‘Process and Extender Oils for EPDM Rubbers’, BP Oil International Brochure MP 617

Brazier D.W. and Schwarz N.N. , Ther-mochim. Acta, 39, No. 1, 1980, p. 7

Capla M. and Borsig E. , Eur. Polym. J., 16, 1980, p. 611

Purakel T.L. and Purper R.L. , ‘Organic Peroxides in Rubber Vulcanisation’, Penn-walt Rubber Chemicals Dept. Brochure; Ind. d. Gomma, 22, No. 12, 1978, p. 45–52

Thomas D.K. , Trans. Faraday Soc, 57, 1961, p. 511

Oxley C.E. and Wilson G.J. , Rubber Chem. Technol., 42, 1969, p. 1147

Walker J. ., J. IRI, 8, No. 2, 1974, p. 64

Loan L.D. , J. Appl. Polym. Sci., 7, 1963, p. 2259

Przybyl W. and Rucinski J. , J. Polim. Tworz. Wielk., 21, No. 7, 1976, p. 324; Inter. Polymer Sci. Technol., No. 2, 1977, p. 21

Fujimoto K. and Nakada S. , J. Appl. Polym. Sci., 13, 1969, p. 2513

Fissler M.A. , ‘Compounding Nordel for Compression Set Resistance’, Du Pont brochure ND 530 1, 1983

JP 8077955, (10.6.1980), Showa Electric Wire and Cable

JP 8077954, (10.6.1980), Showa Electric Wire and Cable

JP 8017534, (12.2.1980), Showa Electric Wire and Cable

JP 8012789, (5.2.1980), Showa Electric Wire and Cable

JP 8012788 (5.2.1980), Japan Kokai Tokyo Koho

JP 7903147, (11.1.1979), Japan Synthetic Rubber

GB 1516708, (5.7.1978), Ind. Pirelli SpA

Endstra W.C. , ‘Crosslinking of Elastomers and Thermoplastics by means of Organic Peroxides’, Paper given to several DKG groups, March 1983

‘Peroxide vulcanisation of EPM and EPDM". Akzo Brochure 9–79

‘Di-Cup and Vul-Cup Peroxides for Vulcanising Ethylene-Propylene Elastomers’, Bulletin ORC-104 E, Hercules Brochure, Wilmington, USA

‘Esprene EPDM’, Technical Manual from Sumitomo Chemicals Ltd., Plastics and Synthetic Rubber Division, International Dept. Tokyo, Japan

Perkins G.T. , ‘Peroxide Curing of Nordel’, Du Pont Brochure ND-310, 2, Wilmington, USA

‘Organic Peroxy Compounds‘. Laporte Chemicals Ltd., Brochure

‘Lucidol Organic Peroxides’, Wallace & Tier-nan Inc., Brochure

Morrison R.T. and Boyd R.N. , in ‘Organic Chemistry’, Publ. Allyn and Bacon Inc. 1959, pp. 88–92.

Lenz R.W. , in ‘Organic Chemistry of High Polymers’, Interscience Publ., 1967, p. 290

van Dine G.M. ., ‘Crosslinking of Polyethylene by Peresters’, Proc. ACS National Meeting, 1971, Paper 116

Ref. 16, p. 247f

Kmiec C.J. and Kamath V.R. , Rubber World, Oct. 1983, 189, No. 1, p. 26

Private Communication from Akzo-Chemie. Duren

Endstra W.C. , ‘Peroxides for the Microwave Curing of Polymers’, Caout. Plast., 60, No. 630, 1983, p. 35

Groepper J. , ‘Peroxide Vulcanisation in the presence of Atmospheric Oxygen’, Kautsch. u. Gummi, Kunstst., 36, 1983, p. 466

Hepburn C. , ‘Bisperoxycarbamates - New A. Class of Vulcanising Agents, Possessing Bound Antioxidant Properties’, Paper presented at PRI Conf. May 1982 in London

Sacrini E. ., ‘New Organic Peroxides and their Use in Elastomer Curing’, Kautsch. u. Gummi, Kunstst., 37, 1984. p. 312

DE 2700955 (21.7.1977), W.C. Endstra. Akzo

BE 864391, (18.7.1977). Lewis R.N. and Bock L.A.

Anon, Mod. Plast., 60. No. 4. 1983. p. 96

Meerbeck A.V. , Kautsch. u. Gummi. Kunstst. 36, 1983, p. 1062

Markert H. and Wiedenmann R. , Siemens R and Inf D. , 2, 1973, p. 85, publ. Springer-Verlag

van Drumpt J.D. and Oosterwijk H.H. , J. Polym. Sci., 14, 1976, p. 1495

Natta G. ., Hydrocarbon Process, Petrol. Refiners, 41, 1962, p. 103

Robinson R. , ., Ind. Engng. Chem., Prod. Res. Dev., 1, 1962, p. 78

Lenas L.P. , Ind. Engng. Chem., Prod. Res. Dev., 3, 1964, p. 269

Lenas L.P. , Ind. Engng. Chem., Prod. Res. Dev., 5, 1966, p. 138

Dunn J.R. , J. Macromol. Chem., 1, 1966, p. 739

Pickup B. , Proc. IRI Conf., Manchester, April 1969

Ref. 16, p. 249

Lohr J.E. , Rubber World, 165, No. 4, 1971, p. 47

Elliott D.J. and Tidd B.K. , Prog. Rubber Technol., 37, 1973/74, p. 83

‘Polyfunctional Methacrylic Monomers as Coagents in Peroxide Vulcanisation’, Sar-tomer Resins Inc., Tech. Bull.

‘Saret Crosslinking Plasticisers for Injection Moulding’, Sartomer Co., Tech. Bull.

‘Dutral: Ethylene Propylene Elastomers, VP3 Peroxide Vulcanisation VP 4 Coagents’, Brochure DV 027 801 from Montedison, 1979, Milan

‘Effect of Coagents on Peroxide Cure’, Hercules Incorp., Wilmington USA, Bulletin ORC 110 D

‘Use of Various Coagents in the Peroxide Crosslinking of EPDM’, Lehmann & Voss & Co., Hamburg, Bulletin G 10/81

Wanless G.C. ., Rubber Chem. Technol., 35, 1963, p. 118

Lenas L.P. , Ind. Engng. Chem., Prod. Res. Dev., 2, 1963, p. 202

Loan L.D. , J. Polym. Sci., B, 2, 1964, p. 59

Baldwin F.B. ., Rubber Chem. Technol., 43, 1970, p. 522

Fujio R. ., Rubber Chem. Technol., 52, 1979, p. 74

Das C.K. , Kautsch. u. Gummi, Kunstst., 35, 1982, p. 753

Anon, ‘Use of Dicyclopentadiene Acrylate as a coagent in Peroxy-Cured Elastomers’, Res. Disci., 215, 1982, p. 78

JP 8027328, (27.2.1980), N. Kouba ., Nippon Kasei Chemical Co.

JP 7928387 (2.3.1979), Yamamura O. , Japan Kokai Tokyo Koho

Frenkel R. Sh. ., Izv. VUZ, Khim. Khim Technol., 20, 1977, p. 626

JP 8116313412 (15.12.1981), Aichi Institute of Technology

JP 76105010, (17.9.1976), Fukumori R. , Asada Chemical Ind. Co.

Dontsov A.A. ., Vyskomol. Soed. A, 20, No. 1, 1978, p. 106; Polymer Science USSR, 20, No. 1, 1978, p.

Bartl H. and Peter J. , Kautsch. u. Gummi, 14, 1961, p. 23

Ahne H. ., Rubber Chem. Technol., 48, 1975, p. 878

Sinebryukhova N.V. , Inshakova L.M. , Sovodin G.A. , ‘Study of the Action of Triallylcyanurate as Coagent in Peroxide Vulcanisation of Ethylene Propylene Rubbers’, Proizv. Shin RTI i ATI, No. 4, 1981, p. 3; Inter. Polymer Sci. Technol., No. 3, 1984, p. 93

US 4093583, (6.6.1978), Apotheker D. , Du Pont

Kato H. ., Rubber Chem. Technol., 56, 1983, p. 287

‘Triallyltrimellitate Crosslinking Agent’, Mod. Plast., 11, No. 10, 1981, p. 76

Rohde E. , Kautsch. u. Gummi, Kunstst., 32, 1979, p. 304

DE 3212538 A 1 (13.10.1983), Bartl H. ., Bayer AG

JP 8021290, (21.2.1980), Japan Kokai Tokyo Koho

JP 8021289, (21.2.1980), Dainishi Nippon Cables

JP 8092718, (14.7.1980), Dainishi Nippon Cables

JP 78108141, (20.9.1978), Nakamura Y. , Mori K. , Sankyo Kasei

Nakamura Y. ., Rubber Chem. Technol., 50, 1977, p. 668

Mori K. , Nakamura Y. , Kumagai M. , Kobun-shi. Robunshu, 89, 1982, p. 523–530

DE 3021871, (18.12.1980), Wody W.E. , Hercules

JP 81135533, (26.3.1980), Dainishi Nippon Cables

Tawney P.O. ., J. Appl. Polym. Sci., 8, 1964, p. 2281

Walker J. ., Proc. Intern. Rubber Conf., Tokyo, Oct. 1975, p. 77

JP 8039200, (26.3.1980), Japan Kokai Tokyo Koho

SU 726134, (5.4.1980), Andreev B.M. , USSR

DE 2837117, (15.3.1979), Ithoh K. and Oshima T. , Shin Etsu Chemical Ind. Co.

JP 7733989, (15.3.1977) Fujita T. and Okada M. , Dainishi Nippon Cables

‘Vistalon Ethylene-Propylene Elastomers, Silane Grafted Moisture Curable’, Essochem Europa Inc., Brochure 82 ET-B 347/2

Kmiec C.J. ., Polym. Preprints, 22, No. 2, 1981, p. 116

US 4129531, (12.12.1978), Raner K. ., Pennwalt

Ref. 16, p. 338–341

Kovacic P. and Hein R.W. , J. Am. Chem. Soc, 81, 1959, p. 1187

Kovacic P. and Hein R.W. , J. Am. Chem. Soc, 81, 1959, p. 1190

Miller S.M. ., J. Polym. Sci., 58, 1962, p. 737

Tokarera L.T. ., Soviet Rubber Techno!., 28, No. 10, 1969, p. 9

Goncharova L.T. and Shvarts A.G. , Proizv. Shin. RTI i ATI, No. 1, 1976, p. 18–20

Grinberg A.A. ., Kauch. i Rezina, 34, No. 7, 1975, p. 49; Inter. Polymer Sci. Technol., No. 12, 1975, p. 89

Kirkharn M.C. , Prog. Rubber Technol., 41, 1978, p. 61

Chow Y.W. and Knight G.T. , Proc. Internat. Rubber Conf., Brighton, 1977, Paper 24; Plastics & Rubber Processing, 2, 1977, p. 115; Gummi, Asbest, Kunstst., 31, 1978, p. 716

Corbelli L. and Giovanardi S. , ‘Crosslinking of Ethylene Propylene Elastomers at Ambient Temperature’, SGF Annual Conf., Boras, 1974; Rev. Plast. Mod., 33, 1977, p. 221

JP 76135952, (25.11.1976), 0. Yamamuro, Nitto Electric Industry Co.

Artemov V.M. ., Kauch. i Rezina, No. 10, 1981, p. 34; Inter. Polymer Sci. Technol., No. 7, 1982, p. 69

JP 7996559, (31.7.1979), Yamamuro O. , Nitto Electric Industry Co.

JP 7928346, (2.3.1979), Yamamuro O. , Nitto Electric Industry Co.

JP 7865348, (10.6.1978), Yamamuro O. , Nitto Electric Industry Co.

JP 8003420, (11.1.1980), O. Yamamuro ., Nitto Electric Industry Co.

JP 79133539, (17.10.1979), Yamamuro O. , Japan Kokai Tokyo Koho

JP 7957556, (9.5.1979), Yamamuro O. , Nitto Electric Industry Co.

Darovshikh G.T. ., Kauch. i Rezina, No. 4, 1978, p. 8–9

Martin J.W. , Rubber Chem. Technol., 46, 1973, p. 275

Drake R.E. , Gummi, Asbest, Kunstst., 35, 1982, p. 180

Draxler A. , Kautsch. u. Gummi, Kunstst., 34. 1981, p. 185

Draxler A. , Kautsch. u. Gummi, Kunstst., 36. 1983, p. 1037

Benning C.J. SPE Journal. 21. 1965. p. 1083

Lohr J.E. and Samples R. , Rubber World. 165, No. 1, 1971, p. 47

Schober D.L. , Wire Journal, 11, No. 5, 1978, p. 84

Nudel'man Z.N. and Butyagina N.D. , Soviet Rubber Technol, 29, No. 6, 1970, p. 10

Haverland A. and Hofmann W. , ‘New Criteria for Evaluating Processing Agents’, Paper given at the Conference PRI, March 1984 in Birmingham and to various DKG groups

Private communication from Chemische Werke Huls

Ref. 16, p. 358ff

USP 1906402, 1929, Newton E.B. , BF Goodrich

Davidson W.L. and Geib I.G. , J. Appl. Phys., 19, 1948, p. 427

Charlesby A. , Proc. Roy. Soc A, 215, 1952, p. 187

Charlesby A. , Atomics and Atomic Techn., 5, No. 1, 1954, p. 12

Jackson W.W. and Hale D. , ‘Vulcanisation of Rubber with High Intensity Gamma Radiation’, Rubber Age, 77, No. 6, 1955, p. 865

Harrington R. , Rubber Age, 81, No. 6, 1957, p. 971; 82, No. 3, 1957, p. 461; 82, No. 6, 1958, p. 1003; 83, No. 3, 1958, p. 472; 85, No. 6, 1959, p. 963; 86, No. 5, 1960, p. 819; 88, No. 3, 1960, p. 475; 90, No. 2, 1961, p. 265; 93, No. 3, 1963, p. 417; 95, Sept. 1965, p. 88

Cassola C.A. and Bonanni A.F. , Rubber Age, 95, No. 3, 1964, p. 414

Traeger R.K. , ‘The Effect of Radiation on the Mechanical Properties of Polymers’, San-dia Corporation, Bibliography, Technical Information Center, SC-R-64-124, March 1964, (also contains 40 references to the radiation crosslinking of NBR)

Pearson D.S. and Bohm G.G.A. , Rubber Chem. Technol., 45, 1972, p. 192

Cavagnat D. ., Rev. Gen. Caoutch. Plast., 576, 1977, p. 263

Ref. 29, p. 442–445

Hatton J.R. ., Polymer, 8, No. 1, 1967, p. 41

G'Bohm G.A. and Tveekrem J.O. , Rubber Chem. Technol., 55, 1982, p. 575

Eldred R.J. , Rubber Chem. Technol., 47, 1974, p. 924

Kammel G. and Wiedenmann R. , Siemens R and Report D , 5, 1976, p. 157, Publ. Springer-Verlag

213a. Spenadel L. , ‘Radiation Crosslinking of Polymer Blends’, Paper given to the 2nd Conf. on ‘Radiation Processing’, Miami 1978

Hofmann E.G. , ‘Industrial Radiation Techniques - Status and Prospects for a new Technology’, Publ. AEG-Telefunken, Wedel (Holstein), 1980

Rijke A.M. and Mandelkern L. , Macromolecules, 4, No. 5, 1971, p. 594

‘Vistalon Ethylene-Propylene Elastomers Radiation Cured Electrical Materials’, Publ. Esso-Chemicals, Belgium, Ref. 82-ET-B 348/2

Heinze H.D. and Hofmann E.G. , Kern-technik, 3, 1961, p. 475

Morganstern K.H. , ‘Radiation's Time has Arrived for Plastics and Rubber’, Proc. Int. Conf. on Radiation Crosslinking SME technical paper FC 74-540, 1974

Hofmann E.G. , ‘Irradiation Equipment for New Uses in Industry and Medicine’, Techn. Comm. AEG-Telefunken, 64, No. 1, 1974, p. 7

Topcik B. , Rubber Chem. Technol., 55, 1982, p. 1019

de Hollain G. , ‘Aspects of Long Teerm Properties of Irradiated Polymers’, J. Ind. Irr. Technol., 1, No. 1, 1983, p. 89

Sonnenberg A.M. , ‘Vulcanisation of Elastomers by Electron Beam’, Proc. ACS, Div. Rubber Chem., Oct. 1983

Fel'dshtein M.S. ., Kauch. i Rezina, 33, No. 3, 1974, p. 10; Inter. Polymer Science Technol., No. 5, 1974, p. 57

Grossman R.F. , Rad. Phys. Chem., 9, 1977, p. 659

US 3988227, (26.10.1976), Eldred R.J. , General Motors Corp.

JP 805223, (22.1.1980), Japan Kokai Tokyo Koho

Sonnenberg A.M. , ‘Electron Beam Vulcanisation of Elastomers’, Proc. ACS, Div. of Rubber Chemistry, Conf. 10, Oct. 1983; Kautsch. u. Gummi, Kunstst., 37, 1984, p. 864

Wildschut A.J. , Rec. Trav. Chim., 61, 1942, p. 898

van der Meer S. , Dissert. Delft, cf. Kunstst., 27, 1947, p. 41

US 2702286 and 2702287, Iknayan N.A. , US Rubber Co.

Ref. 16, pp. 325–331

Giller A. , ‘Phenolic Resins in Today's Rub-ber Industry’, Proc. Inter Rubber Conf., Kiev, 1978, Paper 17

Giller A. , Kautsch. u. Gummi, Kunstst., 17, 1964, p. 174

Novikova L.A. ., Kauch. i. Rezina, 1979, No. 1, p. 11; Inter Polymer Sci. Technol., No. 10, 1979, p. 54

Il'in I.A. ., Kauch. i. Rezina, 28, No. 5, 1969, p. 4; Sov. Rubber Technol., No. 5, 1969, p. 8

Greth A. , Kunstst., 31, 1951, p. 345

Tawney P.O. ., Rubber Age, 83, 1958, p. 100

Giller A. , Kautsch. u. Gummi, 14, 1961, p. 201

DE 3109717, (13.3.1981), Phoenix AG

US 4116085, (26.9.1978), Kageyama K. and Iwakura M. , Yokohama Co.

Fries H. ., Kautsch. u. Gummi, Kunstst., 32, 1979, p. 860

Ref. 16, p. 215–225

US 2975153, (14.11.1958), Monsanto

Schoenbeck M.A. , Rubber Age, 92, 1962, p. 75

Wolfe J.R. and Roche I.D. , Rubber World, 149, No. 2, 1963, p. 62

Quirk F.J. and Minter H.F. , Rubber Age, 99, 1967, p. 63

Imoto M. ., Nippon Gomu Kyokaishi, 41, 1968, p. 583

Mironynk V.P. ., Kauch. i. Rezina, No. 3, 1973, p. 77

SU 897803, (8.4.1980)

JP 8029528, (1.3.1980), S. Roy ., Showa Wire and Cable Co.

US 4089820, (19.1.1972), Phillips Petroleum

‘QCD (Para-Quinone Dioxime)’, Lord Corp., Hughson Chemical Div., Techn. Bulletin DS 10-8003 D

Baldwin F.P. ., Rubber Plast. Age, 42, 1961, p. 500

Walker J. ., Rubber Age, 108, 1976, p. 33

Roukin G.M. , Kauch. i Rezina, No. 12, 1978, p. 17; Inter. Polymer Sci. Technol., No. 5; 1979, p. 8

256, US 4093583, (6.6.1978), Honda T. ., Du Pont

JP 77128941, (28.10.1977), Onizawa M. , Sanyo Trading Co.

JP 76114451, (8.10.1976), Komatsu K. , Japan Kokai Tokyo Koho

Wouters G. and Woods F. , ‘Moisture Curable Silane Grafted Ethylene-Propylene Elastomers’, Proc. Inter. Rubber Conf., Harrogate, 1981

JP 7934354, (13.3.1979), Yamamuro O. , Japan Kokai Tokyo Koho

Bousquet J.A. ., J. Polym. Sci. Polym. Chem., 17, 1979, pp. 1685–1700.

Haidar B. ., Brit. Polym. J., 14, 1982, pp. 126–130.; 15, 1983, pp. 120–124.

US 4391953, (5.7.1983), Morita E. , Monsanto

GB 1586861, (25.3.1981), J. Crosby and Milner J.A. , ICI

EP 42661 A 1, (30.12.1981), Rim Y.S. ., Uniroyal

JP 7753950, (30.4.1977), T. Honda ., Bridgestone Tyre Co.

JP 7809784, (8.4.1978), T. Honda ., Bridgestone Tyre Co.

JP 8027328, (27.2.1980), N. Keubo ., Nippon Kasei Chemical Co.

Sal'nikova V.I. ., Ivz. VUZ Khim., Khim. Technol., 25, No. 1, 1982, p. 105

Bateman L. and Moore C.G. , in Chap. 20, ‘Organic Sulphur Compounds’, Kharash N. (Ed.), Publ. Pergamon, New York, 1961

Bateman L. ., Chap. 15, ‘The Chemistry and Physics of Rubber-Like Substances’, Bateman L. (Ed.), Publ. MacLaren, London 1963

Alliger G. and Sjothun I.J. , ‘Vulcanisation of Elastomers’, Publ. Reinhold, 1963

Porter M. , in ‘Mechanisms of Reactions of Sulphur Compounds Kharash N. (Ed;), Publ. Inter Science Research Foundation, Santa Monica, Cal., Vol. 3, 1968, p. 145

Porter M. , in The Chemistry of Sulphides’, Tobolski A.V. (Ed.), Publ. Interscience Publ., 1968, p. 165 ff

Hofmann W. , ‘Vulcanisation and Vulcanising Agents’, Publ. MacLaren, London, 1967

Scheele W. , Rubber Chem. Technol., 34, 1961, p. 1306; Angew. Makromol. Chem., 16/17, 1971, p. 129

Moore C.G. ., J. Appl. Polym. Sci., 5, 1961, p. 293

Trivette D.C. Jr ., Rubber Chem. Technol., 36, 1962, p. 1360

Dogadkin B.A. and Shershnev V.A. , Rubber Chem. Technol., 35, 1961, p. 1

Morita E. and Joung E.G. , Rubber Chem. Technol., 36, 1963, p. 844

Coran A.Y. , Rubber Chem. Technol., 37, 1964, p. 673

Mullins L. , Proc. NRPRA Jubilee Conf. Cambridge, 1964, Publ. MacLaren, London, 1965

Saville B. and Watson A.A. , Rubber Chem. Technol., 40, 1967, p. 100, (159 Refs.)

Th. Kempermann, Gummi, Asbest. Kunstst., 30, 1977, p. 776 and 868; 31. 1978, p. 247, (188 Refs.)

Blokh G.A. , ‘Organic Accelerators and Curing Systems for Elastomers’, Transl. Moseley R.J. , RAPRA, IPSAT Monograph No. 3, 1981, 324 pp., (792 Refs.)

Hofmann W. , Gummi, Fasern, Kunstst., 37, 1984, p. 278

Private Communication from Polysar Technical Service Center, Antwerp, Belgium

‘Deovulc EG - a Mixed Accelerator’, DOG-Kontakt 26, Bulletin from Deutschen Oelfabrik DOG, Hamburg

Private Communication from Polysar Technical Service Center, Antwerp, Belgium

Private Communication from Polysar Technical Center, Antwerp, Belgium

Rodger E.R. , Gummi, Asbest, Kunstst., 34, 1981, pp. 124 and 300; Inter. Polymer Sci. Technol., No. 7, 1981, p. 88; No. 12, 1981, p. 38

Hofmann W. , Gummi, Asbest, Kunstst., 36, 1983, p. 602; Inter. Polymer Sci. Technol., No. 3, 1984, p. 28; Gummi, Asbest, Kunstst., 37, 1984, pp. 110 and 179, (157 Refs.)

Eholzer U. ., Gummi, Asbest, Kunstst., 28, 1975, p. 646

Jankowski C.J. ., Rubber Age, 87, 1960, p. 833

Baldwin G.P. , Rubber Chem. Technol., 43. 1970, p. 1040

Zapp R.I. ., J. Polym. Sci., 6, 1951, p. 331

Anon, Brit. Plast. Rubber, February 1979, p. 57

Lawrence J.P. , ‘Efficient and Semi-Efficient Vulcanising Systems, Proc. ACS, Division of Rubber Chemistry Conf., Oct. 1976, Paper 87

Lawrence J.P. , Rubber Chem. Technol., 50, 1977, p. 90–98

JP 164860, (17.7.1981), Japan Synthetic Rubber Co.

JP 033664, (26.9.1979), Takauwak

JP 138212, (17.3.1983), Nippon Zeon

US 3202266, (15.2.1977), Goodrich

Ref. 10, p. 256 foll.

Hofmann W. , Gummi, Asbest, Kunstst., 32, 1979, pp. 158, 318, 392

Hofmann W. , unpublished work

Krymowski J.F. and Taylor R.D. , Rubber Chem. Technol., 50, 1977, p. 671

Moore K.C. , Elastomerics. June 1978, p. 36

Satake K. ., J. IRI, 4, No. 1, 1970, p. 21

Williams B. , ‘A Review of Accelerator Systems for EPDM’, Rubber World, 184, No. 3, 1981, p. 28

Allen R.D. , Gummi, Asbest, Kunstst., 36, 1983, p. 534; Inter. Polymer Sci. Technol., No. 5, 1984, p. 1

Coran A.Y. , Nippon Gomu Kyokaishi, 56, 1983, p. 232-257; Ch. 7 in ‘Science and Technology of Rubber’, Ed. Eirich F.R. , publ. New York, 1978

Nishizawa H. , ‘Recent Development Trends in EPDM, 1. Curing of EPDM’, Polym. Dig. (Jap.), 35, No. 9, 1983, p. 2

Antal I. , ‘Vulcanisation of Ethylene-Propylene Rubbers’, Taurus Rubber Works, Budapest

JP 010677, (17.8.1979), Mitsubishi

Fath M.A. and J. de Rudder, Kautsch. u. Gummi, Kunstst., 32, 1979, p. 582

‘Deovulc EG 3’, DOG-Kontakt No. 22, Bulletin from Deutschen Olelfabrik DOG, Hamburg, 1976

Buswell A.G. and Hill P. , ‘Developments in Rubber Chemicals’, Progr. Rubber Technol., 40, 1977, p. 97

Wolfe J.R. (Jr.), J. Appl. Polym. Sci., 12, 1968, p. 1167

Baldi L. and Zannetti R. , Chim. Ind. (Milan), 44, 1962, p. 1350

Gardiner J.B. , Rubber Chem. Technol., 43, 1968, p. 1312

US 3706819, (16.9.1969), Usamoto T. et al., Sumitomo Chemical Co.

Mastromatto R.P. , Rubber Chem. Technol., 44, 1971, p. 1065

Mastromatto R.P. ., Rubber World, 44, No. 3, 1971, p. 53

JP 088580, (5.2.1981), Japan Synthetic Rubber

JP 8218749, Appl. (30.1.1982), Sumitomo

Ricordean Y. and Katzanevas F. , Rev. Gen. Caoutch. Plast., 633, 1983, p. 75–80

Hofmann W. , Progr. Rubber Technol., 46, 1984, p. 43 (312 Refs); Kautsch. u. Gummi, Kunstst., 37, 1984, p. 753

Plexhanova A.L. ., Prozv. Shin RTI i ATI, No. 5, 1980, p. 8–10

JP 7882885, (21.7.1978), Takakuwa Y. , Japan Kokai Tokyo Koho

JP 150268, (7.5.1982), Japan Synthetic Rubber Co.

Moore C.G. , in ‘Proceedings of the Natural Rubber Producers Research Association Jubilee Conference’, Cambridge, 1964, Ed. Mullins L. , Publ. MacLaren, London 1965, pp. 167–194.

Ref. 4, p. 788

Hofmann W. , unpublished work

Scheele W. and Petry G. , Kautsch. u. Gummi, 17, 1964, p. 68

JP 137037, (26.5.1981), Toyoda Gosei

Baldwin F.P. , Rubber Chem. Technol., 45, 1972, p. 1348

Baldwin F.P. ., Ind. Engng. Chem., 36, 1944, p. 791

Gregg E.C. and Katrenick S.E. , Rubber Chem. Technol., 43, 1970, p. 549

Frensdorf H.K. , Rubber Chem. Technol., 41, 1968, p. 316

Wolfe J.R. (Jr.), J. Appl. Polym. Sci., 12, 1968, p. 1183

Carlson L.E. , Rubber Plast News, 12, No. 18, (28.3.1983), p. 20–23

Shershnev V.A. , Rubber Chem. Technol., 55, 1982, p. 537

Mastromatto R.P. ., Rubber Age, No. 2, 1970, p. 64

van Pul J.P. , Gummi, Asbest, Kunstst., 24, 1971, p. 289–293

D'Brown C.H. and Thompson J. , Meeting IRI , Manchester, March 1972

‘Curing Systems for EPDM Polymers’, Monsanto Technical Bulletin TR 8A

‘Recent Developments in Vulcanisation Systems for NBR, EPDM and CR’, Monsanto Technical Bulletin TR 18, see also ref. 167

‘Vulcanisation System for EPDM’, Monsanto Technical Note No. 27

‘Development of Curing Systems for Low Compression Set in EPDM’, Monsanto Technical Bulletin TR 29

‘Vocol for EPDM Mixes’, Monsanto Technical Bulletin O/RC 2

‘Curing Systems for EPDM/SBR and EPDM/NBR Blends’, Monsanto Technical Note 101/78

‘Buna AP’, Bunawerke Huls Bulletin, Dec. 1980

‘Buna AP, Comparable accelerators’, various Bulletins from Bunawerke Huls, Dec. 1983

Buna AP , Preparation for injection-moulding’, Bulletin from Bunawerke Huls

‘EPDM 5465 for Optimum Tear Strength in Injection Moulding’, Polysar Bulletin, September 1983

‘Light Coloured EPDM Roll Coverings’, Polysar Bulletin, May 1983

‘LCM Curable Bulky Windscreen with Improved Compression Set and Dimension Stability’, Polysar Bulletin, May 1983

‘Extruded Sponge Profiles-Continuous Cure’, Polysar Bulletin, September 1983

‘Sulphur Curing Systems for Nordel’, Du Pont Bulletin No. ND-310

‘Perkacit TMTD in black-loaded NR and EPDM mixes’, Akzo-Chemie Bulletin, February 1981

‘Vistalon’, Esso Chemicals Bulletin

‘Curing Systems for Dutral Ter’, Montedison Bulletin

‘EPDM Cure Systems’, BF Goodrich Bulletins 3.002 and 3.004

‘Cure-rite 18 Accelerator’, BF Goodrich Bulletin GC-63

Moles W.E. and Sudekum J.H. , ‘Epcar EPDM Accelerator Study’, BF Goodrich Bulletin EP-4542-871

Steila G. , ‘EPDM Cure Systems for Continuous Vulcanisation’, Esso Technical Report 80 ET-B 624. Paper presented to Danish Rubber Technology Conf.

Stella G. ., ‘Effects of CV Heat Transfer Media on the Curing of EPDM’, Esso Technical Report 81 ET-B 265

Stella G. , Gummi, Asbest, Kunstst., 31, 1978, p. 376

Meuret E. , Gummi, Asbest, Kunstst., 31, 1978, p. 46-48; Inter. Polymer Sci. Technol., No. 7, 1978, p. 75

Anon, Chem. Engng. News, 60, No. 22, (31.5.1982), p. 35

Schoenbeck M.A. , Rubber World, 188, No. 1, 1983, p. 25

Ippen J. and Matenar G. , Ind. Gomma, 26, No. 2, 1982, p. 27

Spenadel L. , ‘Heat Ageing Performance of Ethylene-Propylene Elastomers in Electric Insulation Compounds’, Proc. ACS, Division of Rubber Chemistry, May 1982, Philadelphia, Paper 52

Bedwell R.W. , ‘Sulphur Curing Systems for Nordel 2744’, Du Pont Bulletin ND-310, 1

Hofmann W. , unpublished work

Rozental Y.E. ., Proiz Shin RTI i ATI, No. 1, 1977, p. 11; Inter. Polymer Sci. Technol., No. 7, 1977, p. 85

US 3202266, (15.2.1977), Goodrich

‘Proposed recipes for Dense Non-Cellular Profiles for the Construction of Windows and Frames DIN 7863’, Deutschen Oelfabrik DOG, Lab. Circular No. 4175

‘Vulcanisation Systems for Buna AP’, Bunawerke Huls Bulletin 1972

JP 7912502, (22.9.1967), Matsuura T. , Mitsubishi

JP 660511, (23.5.1979), Mitsui Petrochemical Co.

NL 8005150, (12.9.1980), Stamicarbon

Rhein-Chemie Rheinau Gmb H, Technical Notes 28, 29, 31, 61–65, Mannheim

Pimblott J.G. ., ‘Bis (diisopropyl) thio-phosphorylsulphides in Vulcanisation Reactions’, J. Appl. Polym. Sci., 23, 1979, p. 3621

Kempermann Th. , Kautsch. u. Gummi. Kun-stst., 20, 1967. p. 126 387.

Davies K.M. and Roebuck H. Eur. J. 155, No. 8, 1973, p. 33

US 4065443, (15.7.1976), Campbell R.H. and Wise R.W. , Monsanto

SU 834624, (18.7.1979), Ratnikova T.V. ., USSR

Ratnikova T.V. and B.Yu. Davydov, Kauch. i Rezina, No. 6, 1981, p. 8

Davydov B.Yu. ., Proizv. Shin. RTI i ATI, 10, 1980, p. 9

DE 2638029, (10.3.1977), Crosby J. , ICI

JP 159328, (21.7.1978), Y. Takakuwa

US 4008244, (17.2.1971), Popoff I.C. and Haines P.G. , Pennwalt

DE 2725931,(11.6.1976), Popoff I.C. ., Pennwalt

US 3987017, (19.10.1976), Popoff I.C. and Haines P.G. , Pennwalt

GB 1509406, (4.5.1978), ICI

GB 1560843, (13.2.1980), Pennwalt

Eholzer U. and Kempermann Th. , Kautsch. u. Gummi, Kunstst, 33, 1980, p. 696–699

Sklenarz R. , Gummi. Asbest, Kunstst. 33. 1980, p. 224

Hofmann W. , unpublished work

EP 2154, (24.7.1980), Chemische Werke Huls

SU 717100, (17.4.1978), Mal'gin V.S. , USSR

JP 164860, (17.7.1981), Japan Synthetic Rubber

Plexhanova A.L. ., Proizv. Shin. RTI i ATI, No. 5, 1980, p. 8

JP 138212, (17.3.1983), Nippon Zeon

Okica T. , Polym. Dig. (Jap.), 35, No. 9. 1983, p. 33

Samoilenko L.N. ., Ivz. VUZ, Kh. i Kh. Tekh., 21, 1978, p. 277

US 4280967, (20.3.1980), Goodyear

Zapp R.L. ., J. Polym. Sci., 6, 1951. p. 331

Private Communication from Polysar Technical Service Centre, Antwerp, Belgium

Campbell S.D. , J. Appl. Polym. Sci., 14, 1970, p. 1400; 15, 1971, p. 2661

Campbell S.D. , ‘Structural Characterisation of Vulcanisates’, Rubber Chem. Technol., 44, 1971, p. 731; 45, 1972, p. 1366

Lee C.P.T. and Morrell S.H. J. IRI. Feb. 1963, p. 27; Rubber Chem. Technol.. 46. 1973, p. 487

Davies K.M. , Plastics and Rubber Processing, Sept. 1977, p. 87

Hofmann W. , Katusch. u. Gummi. Kunstst., 36, 1983, p. 1044

Morrison N.J. and Porter M. , ‘Temperature Effects on Structure and Properties during Vulcanisation and Service of Sulphur-Crosslinked Rubbers’, Proc. PRI Conf. Oct. 1982, London, p. 107

Fujimoto K. and Nakade S. , J. Appl. Polym. Sci., 13, 1969, p. 1509

Fujimoto K. and Nakade S. , J. appl. Polym. Sci., 13, 1969, p. 2513

Ratnikova T.V. ., Izv. VUZ. Khim., Khim. Tekhnol, No. 24, 1981, p. 1551

Ref. 4, pp. 789–796

Lautenschlager F.K. , and Edwards K. , Rubb. Chem. Technol., 52, 1979, pp. 213, 1030, 1044, 1050; 53, 1980, p. 27

van den Berg J.H.M. ., Rubber Chem. Technol., 57, 1984, p. 265

van den Berg J.H.M. ., Rubber Chem. Technol., 57, 1984, p. 725