Recycling ground tire rubber (GTR) into usable products has attracted researchers and industry professionals, as it supports the sustainable use of end-of-life tires (ELTs). The environmental implications of tire disposal have driven the need for recycling methods, yet the global production of GTR-derived products remains relatively low. This is primarily due to the high processing costs of grinding tires to fine sizes and the challenges in achieving mechanical properties comparable to virgin rubber. While tire shreds and granules can be repurposed, molded products often struggle to meet the demand and performance standards required for many applications. Improving the material properties of GTR-based products requires better processing techniques and a comprehensive understanding of associated challenges. This review outlines the current status of the GTR molding methods, discusses the properties of products derived from 100% GTR, and GTR blends. It also highlights areas for further work to enhance the properties of GTR products and support the upward valorization of GTR.
CabalarAFKarabashZ. California bearing ratio of a sub-base material modified with tire buffings and cement addition. J Test Eval2015; 43: 1279–1287.
4.
MyhreMSaiwariSDierkesW, et al.Rubber recycling: chemistry, processing, and applications. Rubber Chem Technol2012; 85: 408–449.
5.
ZainolNAGunnyAANAzizHA, et al.Rubber tire recycling and disposal, 2022, pp. 55–114.
6.
YerezhepDTychengulovaASokolovD, et al.A multifaceted approach for cryogenic waste tire recycling. Polymers (Basel)2021; 13: 2494.
7.
Sadot Herrera-SosaEMartínez-BarreraGBarrera-DíazC, et al.Recovery and modification of waste tire particles and their use as reinforcements of concrete. Journal of Polymer Science. 2015. DOI: 10.1155/2015/234690. Epub ahead of print 2015.
8.
FazliARodrigueD. Recycling waste tires into ground tire rubber (Gtr)/rubber compounds: a review. Journal of Composites Science; 4. DOI: 10.3390/jcs4030103, Epub ahead of print 2020.
9.
KościuszkoARojewskiMNowinkaB, et al.Post-molding shrinkage, structure and properties of cellular injection-molded polypropylene. Materials2022; 15: 7079. DOI: 10.3390/ma15207079.
10.
ZedlerŁPrzybyszMKleinM, et al.Processing, physico-mechanical and thermal properties of reclaimed GTR and NBR/reclaimed GTR blends as function of various additives. Polym Degrad Stabil2017; 143: 186–195.
BilgiliEDybekAArastoopourH, et al.A new recycling technology: compression molding of pulverized rubber waste in the absence of virgin rubber. J Elastomers Plast2003; 35: 235–256.
MorinJEWilliamsDEFarrisRJ. A novel method to recycle scrap tires: high-pressure high-temperature sintering. Rubber Chem Technol2002; 75: 955–968.
15.
TripathyARMorinJEWilliamsDE, et al.A novel approach to improving the mechanical properties in recycled vulcanized natural rubber and its mechanism. Macromolecules2002; 35: 4616–4627.
16.
JanaGKDasCK. Devulcanization of automobile scrap tyres by a mechanochemical process. Prog Rubber Plast Recycl Technol2005; 21: 319–331.
17.
GugliemottiALucignanoCQuadriniF. Production of rubber parts by tyre recycling without using virgin materials. Plast Rubber Compos2012; 41: 40–46.
18.
LucignanoCGugliemottiAQuadriniF. Compression moulding of rubber powder from exhausted tyres. Polym Plast Technol Eng2012; 51: 340–344.
19.
QuadriniFSantoLMusacchiE. A sustainable molding process for new rubber products from tire recycling. Prog Rubber Plast Recycl Technol2019; 35: 41–55.
20.
QuadriniFBellisarioDSantoL. Molding industrial products from tire ground rubber. In Ire waste and recycling. Elsevier, 2021, pp. 251–272.
21.
QuadriniFBellisarioDSantoL, et al.Direct moulding of rubber granules and powders from tyre recycling. Applied Mechanics and Materials, 2013: 315–319.
22.
Nobrega SantosJJayaramanR. Sintering of Ground Rubber Tire (GTR) powder. Universite de Sherbrooke. Epub ahead of print 11 December 2023. DOI: 10.17118/11143/21071.
NadalABoixMParresF, et al.Modelling the compression behavior of ground tire rubber. Mater Werkst2016; 47: 326–334.
25.
ChangYHJooBSLeeSM, et al.Size effect of tire rubber particles on tribological properties of brake friction materials. Wear (Lausanne)2018; 394–395: 80–86.
FazliAStevanovicTRodrigueD. Recycled HDPE/natural fiber composites modified with waste tire rubber: a comparison between injection and compression molding. Polymers (Basel)2022; 14: 3197.
28.
DeringerTGröschelCDrummerD. Influence of mold temperature and process time on the degree of cure of epoxy-based materials for thermoset injection molding and prepreg compression molding. J Polym Eng2018; 38: 73–81.
29.
ZedlerŁKowalkowska-ZedlerDColomX, et al.Reactive sintering of ground tire rubber (GTR) modified by a trans-polyoctenamer rubber and curing additives. Polymers (Basel)2020; 12: 3018–3019.
30.
ZedlerŁKowalkowska-ZedlerDVahabiH, et al.Preliminary investigation on auto-thermal extrusion of ground tire rubber. Materials2019; 12: 2090. DOI: 10.3390/ma12132090.
31.
BilgiliEArastoopourHBernsteinB. Pulverization of rubber granulates using the solid-state shear extrusion ž / SSSE process: Part I. Process concepts and characteristics. Powder Technology2001. DOI: 10.1016/S0032-5910(00)00353-3.
32.
BilgiliEArastoopourHBernsteinB. Analysis of rubber particles produced by the solid state shear extrusion pulverization process. Rubber Chemistry and Technology. 2000; 73: 340–355.
33.
HejnaAKosmelaPOlszewskiA, et al.Management of ground tire rubber waste by incorporation into polyurethane-based composite foams. Environ Sci Pollut Res Int2024; 31: 17591–17616.
34.
PhanTMaHMaterialsDP-C, et al.Evaluation on performance of rubber tire powder and waste glass modified binder as crack filling materials using 3D printing technology. Elsevier. https://www.sciencedirect.com/science/article/pii/S0950061824003660 (accessed 3 September 2024).
SambucciMBibliotecaIMarcoV. Life cycle assessment (LCA) of 3D concrete printing and casting processes for cementitious materials incorporating ground waste tire rubber. Recycling2023; 8: 15. DOI: 10.3390/recycling8010015.
39.
SambucciMJournalMV-CE. Influence of waste tire rubber particles size on the microstructural, mechanical, and acoustic insulation properties of 3D-printable cement mortars. Civil Engineering Journal7(6): 937–952 DOI: 10.28991/cej-2021-03091701.
40.
AlkadiFLeeJYeoJS, et al.3D printing of ground tire rubber composites. Int J of Precis Eng and Manuf -Green Tech2019; 6: 211–222.
41.
ShenMLiuJXinZ. Mechanical properties of rubber sheets produced by direct molding of ground rubber tire powder. J Macromol Sci, Part B: Phys2019; 58: 16–27.
DorigatoARigottiDFrediG. Recent advances in the devulcanization technologies of industrially relevant sulfur-vulcanized elastomers. Advanced Industrial and Engineering Polymer Research2023; 6: 288–309.
46.
ParsamaneshMAbbassi-SourkiFKarrabiM, et al.Thermomechanical devulcanization of butyl rubber using twin-screw extruder: process parameters, viscoelastic and compatibility properties. Prog Rubber Plast Recycl Technol2024; 40: 245–267.
47.
FletesRCVLópezEOCGudiñoPO, et al.Ground tire rubber/polyamide 6 thermoplastic elastomers produced by dry blending and compression molding. Prog Rubber Plast Recycl Technol2022; 38: 38–55.
48.
KarakurtCV. Microstructure properties of waste tire rubber composites: an overview. Journal of Material Cycles and Waste Management2015; 17: 422–433. DOI: 10.1007/s10163-014-0263-9.
49.
WangHApostolidisPZhuJ, et al.The role of thermodynamics and kinetics in rubber–bitumen systems: a theoretical overview. Int J Pavement Eng2021; 22: 1785–1800.
50.
RagabMAbdelrahmanM. Enhancing the crumb rubber modified asphalt’s storage stability through the control of its internal network structure. International Journal of Pavement Research and Technology2018; 11: 13–27.
DeD. Processing and material characteristics of a reclaimed ground rubber tire reinforced styrene butadiene rubber. Materials Sciences and Applications2011; 2: 486-495.
BelhaouesARiahiFMarcos-FernándezÁA. Enhancement of the rheological, dynamic mechanical, and morphological properties of thermoplastic natural rubber based on NR/PP blends using ENR/PP-g-MA as a compatibilizer. Prog Rubber Plast Recycl Technol2025. DOI: 10.1177/14777606241239067, Epub ahead of print 1.
55.
ValenteMSibaiA. Rubber/crete: mechanical properties of scrap to reuse tire-derived rubber in concrete; A review. J Appl Biomater Funct Mater2019; 17. DOI: 10.1177/2280800019835486, Epub ahead of print.
56.
XieXZhengYZhuW, et al.Effects of waste rubber particles on workability, mechanical, and sound insulation properties of recycled aggregate mortar. Prog Rubber Plast Recycl Technol2024. DOI: 10.1177/14777606241239066, Epub ahead of print.
57.
EirasJNSegoviaFBorracheroMV, et al.Physical and mechanical properties of foamed Portland cement composite containing crumb rubber from worn tires. Mater Des2014; 59: 550–557. DOI: 10.1016/j.matdes.2014.03.021.
58.
Ramirez-CanonAMuñoz-CameloYSinghP. Decomposition of used tyre rubber by pyrolysis: enhancement of the physical properties of the liquid fraction using a hydrogen stream. Environments2018; 5(5): 72.
PrutEVRapoportNYKutsenkoVA, et al. Structure and Properties of Rubber Powder and Its Materials. Int. Polym. Sci. Technol.2015; 42(6): 9–19.
61.
Araujo-MoreraJVerdugo-ManzanaresRGonzálezS, et al.On the use of mechano-chemically modified ground tire rubber (GTR) as recycled and sustainable filler in styrene-butadiene rubber (SBR) composites. J Compos Sci2021; 5: 68.
62.
FazliARodrigueD. Effect of ground tire rubber (GTR) particle size and content on the morphological and mechanical properties of recycled high-density polyethylene (rHDPE)/GTR blends. Recycling2021; 6: 44.
63.
BianchiOPereiraPBFerreiraCA. Mechanochemical treatment in high-shear thermokinetic mixer as an alternative for tire recycling. Polymers (Basel)2022; 14: 4419.
64.
SusikARodakACañavateJ, et al.Processing, mechanical and morphological properties of GTR modified by SBS copolymers. Materials2023; 16: 1788.
TaoGHeQXiaY, et al.The effect of devulcanization level on mechanical properties of reclaimed rubber by thermal-mechanical shearing devulcanization. J Appl Polym Sci2013; 129: 2598–2605.
67.
MangiliICollinaEAnzanoM, et al.Characterization and supercritical CO2 devulcanization of cryo-ground tire rubber: influence of devulcanization process on reclaimed material. Polym Degrad Stabil2014; 102: 15–24.
68.
MangiliILasagniMAnzanoM, et al.Mechanical and rheological properties of natural rubber compounds containing devulcanized ground tire rubber from several methods. Polym Degrad Stabil2015; 121: 369–377.
69.
FormelaKKleinMColomX, et al.Investigating the combined impact of plasticizer and shear force on the efficiency of low temperature reclaiming of ground tire rubber (GTR). Polym Degrad Stabil2016; 125: 1–11.
70.
LiuHLWangXPJiaDM. Recycling of waste rubber powder by mechano-chemical modification. J Clean Prod2020; 245: 118716.
71.
Buitrago-SuescúnOBrittoR. Devulcanization of ground tire rubber: thermo-oxidation followed by microwave exposure in the presence of devulcanizing agent. Iran Polym J2020; 29: 553–567.
72.
SimonDÁPirityiDZBárányT. Devulcanization of ground tire rubber: microwave and thermomechanical approaches. Sci Rep2020; 10. DOI: 10.1038/s41598-020-73543-w, Epub ahead of print 1.
73.
TamayoARubioFPérez-AparicioR, et al.Preparation and properties of sustainable brake pads with recycled end-of-life tire rubber particles. Polymers2021; 13(19): 3371. DOI: 10.3390/polym.
Nadal-GisbertAVCuerda-CorreaEMFerrer-GiménezC, et al.Characterisation of elastomer prepared from ground tyre rubber: morphological and granulometric study. Plast Rubber Compos2009; 38: 195–200.
76.
ChettahAIchchouMNBareilleO, et al.Dynamic mechanical properties and weight optimization of vibrated ground recycled rubber. J Vib Control2009; 15: 1513–1539.
