Enhancement of the rheological,dynamic mechanical,and morphological properties of thermoplastic natural rubber based on NR/PP blends using ENR/PP-g-MA as a compatibilizer
Restricted accessResearch articleFirst published online February, 2025
Enhancement of the rheological,dynamic mechanical,and morphological properties of thermoplastic natural rubber based on NR/PP blends using ENR/PP-g-MA as a compatibilizer
This study investigates the effects of incorporating a 50/50 blend of Epoxidized Natural Rubber/Polypropylene-grafted maleic anhydride (ENR/PP-g-MA) as a compatibilizing agent (CA) for a 70/30 Natural Rubber/Polypropylene (NR/PP) thermoplastic elastomer (TPE) on the technical properties such as structural analysis, rheological, dynamic mechanical and morphological properties. Formulations with varying CA concentrations (5 to 15 phr) were prepared using a Brabender plasticorder at 180°C for 10 min. The structural analysis was examined by Fourier transform infrared spectroscopy (FTIR), and proton nuclear magnetic resonance (1H-NMR). The rheological behavior was examined using a Rubber Process Analyser (RPA). The dynamic mechanical properties were investigated by DMA. Atomic Force Microscopy (AFM) was used for the morphological examination. FTIR analysis confirmed reactions between the MA group in PP-g-MA and the epoxy groups in ENR, resulting in ENR-grafted PP with an ester and acid-based linkage. This reaction was evident during compatibilizer preparation. RPA results showed increased viscosity for both types of CAs compared to their individual values, confirming crosslinking reactions. Higher CA concentrations led to elevated viscosity and storage modulus. DMA results indicated that the compatibilization led to a significant enhancement in the storage modulus of the blends. Moreover, an increase in the glass transition temperatures (Tg) of the blends was produced. AFM examination revealed a more homogenous distribution of the dispersed PP phase for the CA-containing blends compared to the control NR/PP system.
FindikFYilmazRKöksalT. Investigation of mechanical and physical properties of several industrial rubbers. Mater Des2004; 25(4): 269–276. DOI: 10.1016/j.matdes.2003.11.003.
2.
SoaresBGAlmeidaMSMGuimarãesPIC. The reactive compatibilization of NBR/EVA blends with oxazoline-modified nitrile rubber. Eur Polym J2004; 40(9): 2185–2194. DOI: 10.1016/j.eurpolymj.2004.04.006.
3.
TedescoABarbosaRVNachtigallSMB, et al.Comparative study of PP-MA and PP-GMA as compatibilizing agents on polypropylene/nylon 6 blends. Polym Test2002; 21(1): 11–15. DOI: 10.1016/S0142-9418(01)00038-1.
KuriakoseBDeSKBhagawanSS, et al.Dynamic mechanical properties of thermoplastic elastomers from polypropylene–natural rubber blend. J Appl Polym Sci1986; 32(6): 5509–5521. DOI: 10.1002/app.1986.070320619.
10.
Al-MalaikaSAmirEJ. Thermoplastic elastomers: Part III—ageing and mechanical properties of natural rubber-reclaimed rubber/polypropylene systems and their role as solid phase dispersants in polypropylene/polyethylene blends. Polym Degrad Stabil1989; 26(1): 31–41. DOI: 10.1016/0141-3910(89)90026-8.
11.
IsmailHSuryadiansyah. Thermoplastic elastomers based on polypropylene/natural rubber and polypropylene/recycle rubber blends. Polym Test2002; 21(4): 389–395. DOI: 10.1016/S0142-9418(01)00101-5.
12.
KuriakoseBChakrabortySKDeSK. Scanning electron microscopy studies on tensile failure of thermoplastic elastomers from polypropylene-natural rubber blends. Mater Chem Phys1985; 12(2): 157–170. DOI: 10.1016/0254-0584(85)90053-7.
13.
Roy ChoudhuryNChakiTKBhowmickAK. Thermal characterization of thermoplastic elastomeric natural rubber-polypropylene blends. Thermochim Acta1991; 176: 149–161. DOI: 10.1016/0040-6031(91)80270-S.
14.
AsalethaRGroeninckxGKumaranMG, et al.Melt rheology and morphology of physically compatibilized natural rubber-polystyrene blends by the addition of natural rubber-g-polystyrene. J Appl Polym Sci1998; 69(13): 2673–2690. DOI: 10.1002/(SICI)1097-4628(19980926)69:13<2673::AID-APP18>3.0.CO.2-V.
15.
CaroneEKopcakUGonçalvesMC, et al.In situ compatibilization of polyamide 6/natural rubber blends with maleic anhydride. Polymer2000; 41(15): 5929–5935. DOI: 10.1016/S0032-3861(99)00800-9.
16.
SuriyachiPKiatkamjornwongSPrasassarakichP. Natural rubber-g-glycidyl methacrylate/styrene as a compatibilizer in natural rubber/PMMA blends. Rubber Chem Technol2004; 77(5): 914–930. DOI: 10.5254/1.3547859.
NakasonCPankliengYKaesamanA. Rheological and thermal properties of thermoplastic natural rubbers based on poly(methyl methacrylate)/epoxidized-natural-rubber blends. J Appl Polym Sci2004; 92(6): 3561–3572. DOI: 10.1002/app.20384.
19.
ThongpinCMuanwongAYanyongsakJ, et al.Effect of ENR contents on cure characteristic and properties of NR/ENR/EVA foam. Inside MS2017; 889: 45–50. DOI: 10.4028/www.scientific.net/MSF.889.45.
20.
BhowmickAKHeslopJWhiteJR. Effect of stabilizers in photodegradation of thermoplastic elastomeric rubber–polyethylene blends—a preliminary study. Polym Degrad Stabil2001; 74(3): 513–521. DOI: 10.1016/S0141-3910(01)00188-4.
21.
MahapramSPoompradubS. Preparation of natural rubber (NR) latex/low density polyethylene (LDPE) blown film and its properties. Polym Test2011; 30(7): 716–725. DOI: 10.1016/j.polymertesting.2011.06.006.
22.
DahlanHMKhairul ZamanMDIbrahimA. The morphology and thermal properties of liquid natural rubber (LNR)-compatibilized 60/40 NR/LLDPE blends. Polym Test2002; 21(8): 905–911. DOI: 10.1016/S0142-9418(02)00027-2.
23.
AbdullahIAhmadSSulaimanCS. Blending of natural rubber with linear low-density polyethylene. J Appl Polym Sci1995; 58(7): 1125–1133. DOI: 10.1002/app.1995.070580706.
24.
GuoBCaoYJiaD, et al.Thermoplastic elastomers derived from scrap rubber powder/LLDPE blend with LLDPE-graft-(Epoxidized Natural Rubber) dual compatibilizer. Macromol Mater Eng2004; 289(4): 360–367. DOI: 10.1002/mame.200300311.
ChoudhuryNRBhowmickAK. Compatibilization of natural rubber–polyolefin thermoplastic elastomeric blends by phase modification. J Appl Polym Sci1989; 38(6): 1091–1109. DOI: 10.1002/app.1989.070380609.
28.
PichaiyutSNakasonCKaesamanA, et al.Influences of blend compatibilizers on dynamic, mechanical, and morphological properties of dynamically cured maleated natural rubber and high-density polyethylene blends. Polym Test2008; 27(5): 566–580. DOI: 10.1016/j.polymertesting.2008.03.004.
29.
ThitithammawongANoordermeerJWMKaesamanA, et al.Influence of compatibilizers on the rheological, mechanical, and morphological properties of epoxidized natural rubber/polypropylene thermoplastic vulcanizates. J Appl Polym Sci2008; 107(4): 2436–2443. DOI: 10.1002/app.27233.
30.
MahendraIPWirjosentonoBTamrin, et al.The influence of maleic anhydride-grafted polymers as compatibilizer on the properties of polypropylene and cyclic natural rubber blends. J Polym Res2019; 26(9): 215. DOI: 10.1007/s10965-019-1878-2.
31.
ChuayjujitSSakulkijpiboonSPotiyarajP. Preparation of thermoplastic elastomer from epoxidised natural rubber and polystyrene. Polym & Polym Compos2010; 18(3): 139–144. DOI: 10.1177/096739111001800303.
32.
GeorgeSNeelakantanNRVarugheseKT, et al.Dynamic mechanical properties of isotactic polypropylene/nitrile rubber blends: effects of blend ratio, reactive compatibilization, and dynamic vulcanization. J Polym Sci B Polym Phys1997; 35(14): 2309–2327.
33.
SetuaDKGuptaYN. On the use of micro thermal analysis to characterize compatibility of nitrile rubber blends. Thermochim Acta2007; 462(1–2): 32–37. DOI: 10.1016/j.tca.2007.06.004.
34.
BenmesliSRiahiF. Dynamic mechanical and thermal properties of a chemically modified polypropylene/natural rubber thermoplastic elastomer blend. Polym Test2014; 36: 54–61. DOI: 10.1016/j.polymertesting.2014.03.016.
35.
MarkhamRL. Introduction to compatibilization of polymer blends. Adv Polym Technol1990; 10(3): 231–236. DOI: 10.1002/adv.1990.060100307.
36.
PanigrahiHSreenathPRBhowmickAK, et al.Unique compatibilized thermoplastic elastomer from polypropylene and epichlorohydrin rubber. Polymer2019; 183: 121866. DOI: 10.1016/j.polymer.2019.121866.
37.
GeorgeSReethammaJSabuT. Blends of isotactic polypropylene and nitrile rubber: morphology, mechanical properties and compatibilization. Polymer1995; 36(23): 4405–4416. DOI: 10.1016/0032-3861(95)96846-Z.
38.
HashimASOngS. Study on polypropylene/natural rubber blend with polystyrene-modified natural rubber as compatibilizer. Polym Int2002; 51(7): 611–616. DOI: 10.1002/pi.920.
39.
PhinyocheepPAxtellFHLaoseeT. Influence of compatibilizers on mechanical properties, crystallization, and morphology of polypropylene/scrap rubber dust blends. J Appl Polym Sci2002; 86(1): 148–159. DOI: 10.1002/app.10917.
40.
NakasonCSaiwariSKaesamanA. Rheological properties of maleated natural rubber/polypropylene blends with phenolic modified polypropylene and polypropylene-g-maleic anhydride compatibilizers. Polym Test2006; 25(3): 413–423. DOI: 10.1016/j.polymertesting.2005.11.006.
41.
NakasonCWannavilaiPKaesamanA. Thermoplastic vulcanizates based on epoxidized natural rubber/polypropylene blends: effect of compatibilizers and reactive blending. J Appl Polym Sci2006; 100(6): 4729–4740. DOI: 10.1002/app.23260.
42.
TaranamaiPPhinyocheepPPanbangredW, et al.Antibacterial activity of sustainable composites derived from epoxidized natural rubber/silver-substituted zeolite/poly(lactic acid) blends. J Mater Sci2019; 54(14): 10389–10409. DOI: 10.1007/s10853-019-03599-1.
HamzahRBakarMAKhairuddeanM, et al.A structural study of epoxidized natural rubber (ENR-50) and its cyclic dithiocarbonate derivative using NMR spectroscopy techniques. Molecules2012; 17(9): 10974–10993. DOI: 10.3390/molecules170910974.
WuS. Formation of dispersed phase in incompatible polymer blends: interfacial and rheological effects. Polym Eng Sci1987; 27(5): 335–343. DOI: 10.1002/pen.760270506.
47.
Holsti-MiettinenRMSeppäläJVIkkalaOT, et al.Functionalized elastomeric compatibilizer in PA 6/PP blends and binary interactions between compatibilizer and polymer. Polym Eng Sci1994; 34(5): 395–404. DOI: 10.1002/pen.760340504.
48.
GermainYErnstBGenelotO, et al.Rheological and morphological analysis of compatibilized polypropylene/polyamide blends. J Rheol1994; 38(3): 681–697. DOI: 10.1122/1.550602.
49.
ValenzaAAciernoD. Ternary blends of nylon 12/polypropylene/modified polypropylene: influence of functional groups of the modified polypropylene. Eur Polym J1994; 30(10): 1121–1126. DOI: 10.1016/0014-3057(94)90248-8.
50.
JoshiMMaitiSNMisraA. Poly(butylene terephthalate)/high density polyethylene alloys. II. Mechanical properties and rheology. J Appl Polym Sci1992; 45(10): 1837–1847. DOI: 10.1002/app.1992.070451018.
51.
OommenZThomasSPremalathaCK, et al.Melt rheological behaviour of natural rubber/poly(methyl methacrylate)/natural rubber-g-poly(methyl methacrylate) blends. Polymer1997; 38(22): 5611–5621. DOI: 10.1016/S0032-3861(97)00120-1.
52.
GeorgeSRamamurthyKAnandJS, et al.Rheological behaviour of thermoplastic elastomers from polypropylene/acrylonitrile–butadiene rubber blends: effect of blend ratio, reactive compatibilization and dynamic vulcanization. Polymer1999; 40(15): 4325–4344. DOI: 10.1016/S0032-3861(98)00681-8.
53.
ZhangXLooLS. Study of glass transition and reinforcement mechanism in polymer/layered silicate nanocomposites. Macromolecules (Washington, DC, U S)2009; 42(14): 5196–5207. DOI: 10.1021/ma9004154.
ThomasSGeorgeA. Dynamic mechanical properties of thermoplastic elastomers from blends of polypropylene with copolymers of ethylene with vinyl acetate. Eur Polym J1992; 28(11): 1451–1458. DOI: 10.1016/0014-3057(92)90291-9.
57.
OommenZGroeninckxGThomasS. Dynamic mechanical and thermal properties of physically compatibilized natural rubber/poly(methyl methacrylate) blends by the addition of natural rubber-graft- poly(methyl methacrylate). J Polym Sci B Polym Phys2000; 38: 525–536.
58.
GarciaPSde SousaFDBde LimaJA, et al.Devulcanization of ground tire rubber: physical and chemical changes after different microwave exposure times. Express Polym Lett2015; 9(11): 1015–1026. DOI: 10.3144/expresspolymlett.2015.91.
